Page 81 of 294 FirstFirst ... 3171798081828391131181 ... LastLast
Results 801 to 810 of 2939

Thread: [GUIDE] - DIOS MIOS v2.10 - Play Gamecube Backups From Your USB HDD

  1. #801
    Moderator
    Only Site Donators Can PM Staff
    VWA
    SNES_Master's Avatar
    Join Date
    Dec 2011
    Posts
    4,160
    Thanks
    967
    Thanked 1,108 Times in 874 Posts
    Quote Originally Posted by applegoku
    ok i did the dois mios usb thing but when i boot it up it boots the game in my disc slot but when i take the game out it just turns off the wii im useing usb loeader gx plz help!
    Which version of USB Loader GX and DIOS MIOS are you using? And are you luanching it from a forwarder channel or Homebrew Channel?

  2. #802
    New Member candylove's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    514
    Thanks
    63
    Thanked 176 Times in 155 Posts
    Always try dios-mios-booter r30 ( press the -(L) Button for USB Device with dios mios booter) and DIOS MIOS 2.2 wad install with Wad Manager to IOS236, first try from HBC, if it works then you could try the other USB Loaders like WiiFlow r663, CFG Loader r45, or USB Loader GX r1202, usbloader GX r1202. IF you are having issues check your USB Loader settings, sometimes removing the configuration settings file in wiiflow app and GXGameSettings.GFG file in usbloader_gx app gets rid of the issues....

    check out the guide-dios-mios
    USB1, FAT32 with cluster size 32kb, active, primary and first partition of the hard drive.
    GC games in USB1/games/GAMEID/game.iso

    (DIOS MIOS will not work if your hard drive is not FAT32 or cluster size is more than 32kb or USB2 or 2nd partition of hard drive)
    Last edited by candylove; 08-26-2012 at 11:24 AM.

  3. #803
    New Member
    Join Date
    Feb 2012
    Posts
    34
    Thanks
    13
    Thanked 2 Times in 2 Posts
    Hey all, in need of a bit of help. Prior to now I had been using a WBFS partitioned HDD with my Wii, so I didn't really bother with using it for much else besides that. I recently got help from SNES_Master and candylove in regards to changing the file type of the HDD, so my computer could access it. That went well enough, and I proceeded to overwrite the version of DML I had been using since I installed it in June with DIOS MIOS 2.2.

    Before I was running my Wii backups off the HDD, while I had a half dozen or so GCN backups on my SD Card.

    Well, now I have all that installed, when I attempt to load Wii games from the HDD using WiiFlow, it goes to a black screen. Meanwhile, loading a GCN game loads the one currently in my disc slot. My HDD is FAT32, 32KB cluster, running IOS58 and WiiFlow version: r418. The HDD in use has a single partition that's active and primary.

    Anyway, thanks in advance for any and all help. Hopefully when I get a better understanding I, in turn, can help others.

    EDIT: So I noticed I had used the DML 2.2 wad instead of the DM 2.2 one and corrected that. Also did a bit of testing... when I had DML 2.2 with Games/GameID/GCN.iso on the root of my HDD along with the wbfs folder, Wii games wouldn't load. When I took the Games folder off the HDD and put it on the SD, Wii games would load again just fine, but WiiFlow still loaded the GCN game in my disc slot. Now when I have DM 2.2 installed, Wii games won't load again. Could my WiiFlow version be out of date?
    Last edited by DrkrZen; 08-27-2012 at 02:52 AM.

  4. #804
    New Member candylove's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    514
    Thanks
    63
    Thanked 176 Times in 155 Posts
    Quote Originally Posted by DrkrZen View Post
    Hey all, in need of a bit of help. Prior to now I had been using a WBFS partitioned HDD with my Wii, so I didn't really bother with using it for much else besides that. I recently got help from SNES_Master and candylove in regards to changing the file type of the HDD, so my computer could access it. That went well enough, and I proceeded to overwrite the version of DML I had been using since I installed it in June with DIOS MIOS 2.2.

    Before I was running my Wii backups off the HDD, while I had a half dozen or so GCN backups on my SD Card.

    Well, now I have all that installed, when I attempt to load Wii games from the HDD using WiiFlow, it goes to a black screen. Meanwhile, loading a GCN game loads the one currently in my disc slot. My HDD is FAT32, 32KB cluster, running IOS58 and WiiFlow version: r418. The HDD in use has a single partition that's active and primary.

    Anyway, thanks in advance for any and all help. Hopefully when I get a better understanding I, in turn, can help others.

    EDIT: So I noticed I had used the DML 2.2 wad instead of the DM 2.2 one and corrected that. Also did a bit of testing... when I had DML 2.2 with Games/GameID/GCN.iso on the root of my HDD along with the wbfs folder, Wii games wouldn't load. When I took the Games folder off the HDD and put it on the SD, Wii games would load again just fine, but WiiFlow still loaded the GCN game in my disc slot. Now when I have DM 2.2 installed, Wii games won't load again. Could my WiiFlow version be out of date?
    Try WiiFlow r663,you could update WiiFlow r418 from the wii or your computer. IF you are having issues check your USB Loader settings, sometimes removing the configuration settings file in wiiflow app gets rid of the issues because it was set to use the SD card and WBFS partitioned HDD or just remove the old wiiflow app and put a new wiiflow r663 app without the settings file in your apps folder

    Do not format your HDD just change the cluster size.
    This is from my previous post:
    Only for dios mios you need FAT32 with 32KB cluster size so after you convert it to FAT32 check the cluster size with Acronis or MiniTool, if it is 64KB use Acronis Disk Director 11 Advanced to change the cluster from 64KB to 32KB cluster it is very quick, you could also use MiniTool Partition Wizard Professional Edition to change the cluster size, I remove the HB stuff from the hard drive and I kept it on the computer and I left all the games and videos on the hard drive and I did not lose any data and it is very fast also and the games and videos work perfect after

    I would also like to recommend some apps for your FAT32 HDD if you do not have it yet WiiMC, WiiMC Channel Installer, FCE Ultra GX plus channel Installer, Snes9x GX plus channel Installer, VBA GX, Homebrew Browser app

    P.S Do not forget the Plugins Pack v5 for WiiFlow r522+
    Last edited by candylove; 08-27-2012 at 08:23 AM.

  5. 2 Users Say Thank You to candylove For This Useful Post


  6. #805
    New Member
    Join Date
    Oct 2010
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Ok I have a question regarding having both GC and WII games on the same partition. I have my USB formatted to FAT32 with 32kb clusters.

    My problem is that I cannot put any of my large wii games onto it. I receive the error, "Game.iso is too large for the destination file system." Having googled this error I found out that FAT32 does not allow for files larger than 4GB. How do I go about solving this problem?

    :edit:
    Well I seem to have solved my own problem. I did some more digging and found that I could use Wii Backup Manager to add games to my usb drive instead.
    Last edited by Ghostmorriss; 08-27-2012 at 10:37 AM.

  7. #806
    New Member
    Dios Mios Expert
    cwjakesteel's Avatar
    Join Date
    Nov 2010
    Posts
    297
    Thanks
    71
    Thanked 124 Times in 67 Posts
    Ghost, you need to use "wii bakcup manager" to split the Wii games into 4GB partitions. So if you have a Wii game bigger than 4GB it will reduce it to 2 files of 4GB + some. It will be in .wbfs format.

    btw. I just saw your edit.

  8. 1 User Says Thank You cwjakesteel For This Useful Post


  9. #807
    New Member
    Join Date
    Feb 2012
    Posts
    34
    Thanks
    13
    Thanked 2 Times in 2 Posts
    Thanks, candy. I'll give that version of WiiFlow a try. Also, everything you recommended I have.

    Got WiiMC yesterday and love it. Now, off to work... again!

    EDIT: Just wanted to update, updating to that new version of WiiFlow did the trick, candy! I can load both my Wii and GCN games from HDD, now. Thanks a lot for your help!
    Last edited by DrkrZen; 08-27-2012 at 03:36 PM.

  10. #808
    New Member
    Join Date
    Apr 2012
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    I'm trying to load Zelda Wind Waker with Ocarina but every time I try it with USB Loader GX, it gives me a green screen. If I try CFG USB Loader, it either loads without the codes or refuses to load at all.

  11. #809
    New Member
    Join Date
    Aug 2012
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I'm trying to download dios mios from the google code website but it only gives me the option of source files and executables. I don't care about these, I need the wad file for my wii (and I'm on a Mac so these executables are worthless to me).

    Can anybody send me the mios cios 2.2 wad?

  12. #810
    New Member
    Join Date
    Oct 2010
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by macmee View Post
    I'm trying to download dios mios from the google code website but it only gives me the option of source files and executables. I don't care about these, I need the wad file for my wii (and I'm on a Mac so these executables are worthless to me).

    Can anybody send me the mios cios 2.2 wad?
    That's strange. All you need to do is goto
    Code:
    http://code.google.com/p/diosmios/
    Click "Downloads"
    And then you should have several options. I'm using the "DIOS MIOS 2.2 for real NAND (+source)"

    The actual download link for the one I am using is:
    Code:
    http://uploaded.net/file/of524gjv
    Hope that helps.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •