Results 1 to 4 of 4

Thread: ps3 jail break failed coming out of service mode

  1. #1
    New Member
    Join Date
    Jan 2011
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts

    ps3 jail break failed coming out of service mode

    Using a e3 card reader i downgraded from 3.5 to 3.41 and went to leave factory mode but it failed, the ps3 green light just keeps flashing. if i tired to start without the usb the green light goes red
    I backed up the usb card and re copied it to the usb stick and tried the last stage again
    if i use a clean usb and just file 2 and no sys text then i get this message on the PS3
    The system software cannot be run correctly. Press the PS buttonto try to restart the system
    If the system cannot be restarted, you must reinstall the system software.
    Connect storage media that contains update data of version 3.41 or later, and press the START and SELECT buttons at the same time.
    For information on how to obtain update data refer to SCE Web site for you region

    my sys.txt on the card is
    manufacturing updating start
    PackageName = /dev_usb000/PS3UPDAT.PUP
    settle polling interval success
    vflash is enabled...
    creating system regions...
    create storage region: (region id = 1)
    create storage region: (region id = 2)
    format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
    create storage region: (region id = 3)
    format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
    creating system regions done.
    boot from nor flash...
    creating nor flash regions...
    create storage region: (region id = 2)
    create storage region: (region id = 3)
    creating flash regions...
    create storage region: (region id = 1)
    create storage region: (region id = 2)
    format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
    create storage region: (region id = 3)
    format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
    create storage region: (region id = 4)
    format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
    create storage region: (region id = 5)
    create storage region: (region id = 6)
    Initializing
    taking a while...
    start Updating Proccess
    UpMng.UpdatePackage() failure
    manufacturing updating FAILURE(0x8002f048)
    Total Elapsed time = 20255 msec

    please advise what i should do
    thanks

  2. #2
    New Member
    Join Date
    Dec 2010
    Location
    Australia
    Posts
    93
    Thanks
    13
    Thanked 31 Times in 26 Posts
    download the new 3.55 firmware from sony/ps3 website from your respective country and install it, then look at the using the new 3.55 CFW's goin around KMEAW_355_CFM or GEOHOT 3.55....

    im using KMEAW's 3.55 CFW and using multiman and gia manager fine to play backups, havent tried any other homebrew except those 2 backup managers

  3. #3
    New Member
    Join Date
    Jan 2011
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I went with 3.41 firmware , but how silly as I want to use GT5 and black ops and need 3.50. A waste of money onE3 card that i got 3 days ago.

    But it looks like3.55 is the way forward after reading forums

  4. #4
    New Member generationxile's Avatar
    Join Date
    Nov 2008
    Location
    Wisconsin
    Posts
    37
    Thanks
    20
    Thanked 2 Times in 2 Posts
    --- post deleted and moved to correct thread, sorry, wasn't paying attention--------
    Last edited by generationxile; 04-23-2011 at 11:35 PM. Reason: wrong section

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •