This happened to me when I soft-modded our 2 new wii's with 4.3U. I downloaded the Letterbomb and extracted the contents to my SD card.
Originally Posted by Vla Kne
When I opened my SD Card, letterbomb was not appearing even I changed dates.
I just created a new memo and posted it (I had read this in some forum), and when i opened my sd card again to see the contents, the letterbomb appeared.
Try this and see if it will work for you.
Originally Posted by charlze
Thnks for reply but it didnt help.
I also tried back the date to 2007 (didnt hear about this) but that didnt help either.
Any other soulution ?
Hi, excellent guide, but i have a trouble, the channels that i installed using this guide (wiiflow, neogamma and others) don't work; when i open them, after a moment, appears the system menu, i can only open them from the HBC, why? what i have to do to use the channels from SM?
Hello Vla Kne,
I'm sorry if the method I suggested was not able to help you.
Please check the items below: (these are the things that I did to get letterbomb to work)
1. Use 1-2g SanDisk card ( preferred and recommended by the guide, I haven't tried using greater than 2G though)
2. Extract the Letterbomb.rar and copy the contents of the extracted file to the root of the SD card.
the SD root directory should have the 2 important files of the letterbomb
private folder and boot.elf
3. Insert the SD card to the Wii SD card slot. Create and memo and post and then check Message.
Ahm i checked all, and i dont know why the forwarders channels doesnt load. What i have to do?. Excuse my bad english and thanks in advance.
If anyone could help me with this, it would be much appreciated!
I am on a wii w/ 4.3U, I followed the directions exactly as they are outlined in the guide (at least as far as I can tell), and am having an issue with my wii remote, when I try to load any usb loader, they don't recognize any movement, only buttons pressed are recognized.
I checked the model number on the remote, and it is an older remote that is supposed to work, any ideas?
Hard sync your Wii Remote to the Wii before you enter Homebrew. Do that by hitting the Red Button above the SD card slot, then hitting the Red Button under the right AA battery on the back of your Wii Remote. Don't go into Homebrew or any Loaders till you are hard synced. Bummer but seems to be an issue.
Originally Posted by soulace
Are you sure you have followed part 3 The Final Step. I just did this guide today on a wii we bought second hand in town. It has 4.3e system. I follwed the guide completely, without doing the shopping channel bit, and it worked fine. Make sure you have the loaders on your sd card, and it is set up correctly, its easy to make a mistake right at the end, when you are only putting files on the sd card, not installing them. If they are there try another install of part 3 The Final Step, format your sd card again first. Hope this helps.
Originally Posted by Luis Quiroz
The trouble is gone, my wii 4.3u was already hacked for someone else but, the HBC had issues, and i doesn't had a nand back up; anyway in some moment i uninstalled the ios 58, and i didn't installed it again. I installed yesterday and now everything goes smoothly.
Originally Posted by hawker
Sorry for my bad English