wii remotes work in main menu but unsync turn off in channels
I have to soft modded wiis both with 4.3 and both have worked perfect for 7 months
Now suddenly both the wii remotes I have unsync when you go into a channel and will not resync
This happens on both wiis.
I have changed batteries
I have unplugged the wiis for 30 seconds and tried resyning
I have held in the sync button on the wii for 15 seconds to clear the sync memory and then resync'd
I went and bought a wand plus. It will eventually after 2 minutes resync in some channels but not all but that is only because it will continually resync on its own.
I have tried a different sensor bar even though every thing I read says the sensor bar has nothing to do with this problem
I have moved the wiis to a different room
I have not added any updates or software to the wiis
I have tried all of the above with and without a usb drive plugged in
NO matter what I do the same result
I can sync at teh health warning screen
it stays syned at the main menu
then when you go into any channel the wii remote turns off and when you try to resync it will not sync
It happens on two different wiis with 3 different remotes including a brand new one
Any help would be appreciated
wii remote turn off when starting a channel
Does anybody have a solution to this problem? Is it the Wii Bluetooth module that needs replacing? Thanks.
RE: controllers still turn themselves off at "Start"
It will not work with any controller, regular or motion plus built in. Any controller can be synced to work at startup and can navigate the Wii menu and system settings without any problem -- but as soon as I click the Start button of any channel, the remote turns itself off (though the channel loads and begins as normal). So this seems to rule out sensor bar, remote or other hardware issues.
I did a System Format -- no change. I tried to update online to 4.3U -- it says I am already running the latest firmware, though the menu clearly says 4.1U. (It somehow went from 4.3U to 4.1U in the soft modding process.) So now I have an unmodded 4.1U base system but the controllers will not work past any channel Start button. Anybody have any ideas??