Flashing Smasung nand - onboard
Thanks for explanations, but the issues where somewhere elsewhere.
After soldering the nand to Infectus, tried to recognized with Xval triggering D0 to GND but keep getting "Fabricant inconnu/ Type inconnu".
Tried without triggering D0 to GND and the nand is detect in Xval.
Do the test with read, and when write, every first block that has to be written gives different block warning and display instantly Finished! ( tried with different address)
After google it a little bit more it came with a solution.
Samsung nand's are a bit fussy when programing onboard and there is needed an extra 3.3V power up to Infectus.
After soldering 3.3V to Infectus writing came without problems.
It took about 3 hours to write full nand 512. Also, received many, many different bloks, as the nand image was done right after i installed bootmii and IOSses where changed.
Also i haven't trigger D0 to GND as Jordan5 said.
The diagram to solder to 3.3V is the folowing
Firs power up where also a black screen, but after installing wireless module it booted to menu. Hopefully this time wouldn't hang up on Priiload installation, or i'll give up on it.
Thanks for reply, keep it going. :)
Actually is not my soldering, the indication can be found here
Mine is a little bulky, i haven't tried to make it art in 40 min. :)
It would have been easier to do it externally but, I don't have an TSOP48 adapter handy around...