WiiKey 2 Startup Problem
Thanks to all who read...
I installed the WiiKey 2 in a brand new D2E unit. I have connected +3v, Gnd, A,B,C,G. I have verified 3.3v on the WiiKey 2 board. Using a continuity meter, I verified good connections and no shorts with all surrounding pins/traces on the drive.
On power up I see the WiiKey's LED's go red for a second, then quickly through a Blue, Red, Blue, off sequence. The Wii comes up and asks me to press A to identify the controller, I press A and hear the bong. It moves to the language selection screen and English is pre-selected. From this point I cannot move to another language or to confirm to continue.
The drive does accept disc's and I hear them spin up with no problem.
Since the original install, I have taken everything back apart to verify proper voltages and re-check wire landings. All are correct.
I would appreciate any help you can give.
(BTW, this is a Yellow Sticker WiiKey 2)
Alright, I will open myself up to the torture.
Apparently these things called Wii's have a Sensor Bar that needs to be plugged in. Its amazing how much better the remotes work with it.
Alright, let the noob have it.......
roflol...we all do different things like that
Originally Posted by nightshade
LOL! And here we thought this would be a complicated problem :D Seems it was much more complicated then we thought :D:D:D:D