Whatever you like.... try them both. I use Cfg.
He didn't joostin, his last question was deleted as was your reply for being off topic.
im stuck here,
1. Install One of the Forwarder Channels With Wad Manager. Extract One of the RAR's
|1. Wiiflow Forwarder -DFWF |2. WiiFlow Forwarder Black Edition-DFWF |
- cIOS222/223 Users -- Download THIS -- Extract the RAR File directly to USB:/
- cIOSx 249 Rev19/20 Users -- Download THIS -- Extract the RAR File directly to USB:/
i downloaded wiiflow forwarder -dfwf and,
ciosx 249 rev19/20, i extracted it to hard drive. But what do i do with the downloaded wiiflow zip file?
Are you referring to the forwarder channel? Scroll down right below the part you copied above and you will see instructions for installing the wad file. First extract the RAR and you will be left with a .wad file.
Awesome, you are the best, I'm going to try it now.
Copy the Wad file to the "Wad" folder on your SD Card
Start HBC and Load Wad Manager
Select <IOS249> -- Press A -- Nand Emulation <Disabled> -- Source <Wii SD Slot>
Select the Wad file and Press A -- Press A again to install - Wait - Finished
do i create a Wad file on my sd card? or on my hard drive?
What do you mean? You extract the RAR you downloaded for the forwarder channel and it will give you a wad file. Move the wad file to the wad folder on your SD card.
My sd card has no folders on it, I was prompted to delete everything after I finished the 3.0-4.2 softmod guide. Everything else is on my hdd
Then make a wad folder.....
On the sd card? Must I leave the sd card in the wii all the time after?