Hello. I falowed the instructions and decided to run from sd with hbc, it works, i can download covers for games and change options and themes, but when i want to start a game... it says loading, please wait.. under this a new line with "ios(249)" apears and then.. nothing, remoate does not work, only the reset and power butons. i tried waiting even for 1 hour, tried all .dol revs on the update option. they are all the same.
i have instaled cios249 rev 17 on 4.2 sistem menu
the hdd was from my laptop, it has 4 partitions, including the one with the OS on it. all i did is format and add some games with wbfs manager to a partition i didn;t use. the games are fine, since i runed them from a stick with neogama.
Are you saying the drive is IN your laptop or its an external? WBFS partition should be primary and it will only work with an external drive
the hdd WAS in my laptop. i bouht a 500 gb usb hdd, and replaced the hdd inside with my laptop's 250 gb one. The wbfs partition is not primary since the partition with OS is, thow, it detects it and i can add covers to games, and change options, only problem is it just not start the game. First i tried the usb hdd when i bought it, with the 500 gb hdd inside, and it worked with neogama. i will try to delete all partitions and make just 2.
Originally Posted by Krank
Could be a problem with the HDD or the enclosure. You can set more then one partition to primary so that shouldn't be an issue. If you have no PC files to store that are over 4GB's I recommended backing up the drive and formatting the entire thing to FAT32. WBFS is not needed anymore.
If it doesn't work formatted to FAT32 (backup your drive first!) with Configurable USB Loader v60 or beyond then it's a drive computability issue. You can test with a flash drive or alternative HDD (if available) to confirm this.
well, noting too valuable on the hdd since i cloned it to the new one. i kept it for 2 days to be sure everything works fine, so now when i wanted to delete partition i noticed only the os partiton was primay, the rest were logical (including the one i formated in wbfs for the wii), so i deleted all, and made 2 primayr drives, formated the first one to wbfs, and works perfectly, loads in a few seconds XD thx alot for the tip.
i know this is a double post, but i dont think i put it the right area the first time. I have the cfg loader on the usb ex hdd and i used the forwarder that was provided, but when you click the forwarder the screen goes black and freezes up and some of the games when getting covers will freeze up the system as well, 4.1u system and fat32 exhd what should i look at first to try and fix
Sorry for the late reply, delete Cfg completely and reinstall. Try the new v65 pack in the first post and the new forwarder.
- - - -
- Updated download to v65 - Updated instructions as well
- Forwarder channel updated - Uses IOS58 now
- More updates to come...
I followed the guide and did all the steps, but when I start USB Loader in my Wii menu, I get the blank screen and after 3-4 seconds my wii went back to menu. What is the problem?
Maybe you didn't extract the file right? Structure should be...
I did like that. To SD card. Nothing happens. I tried USB Loader GX but I get the same problem. Maybe loaders trying to access USB, not SD card?
P.S. My Wii was softmoded by your guide yesterday.