Green Light D2SUN v3
hi ive just installed my D2SUN v3 and have a green light when i start up my wii does this mean its working ? i havent got a backup to try yet is there another way to see if the chip is working thanks
also does the F have to be connected from chip to board ?
yes that usually means it is working. the F is optional if the clip alone doesnt get it going.
ok cheers , suppose ill find out when i get a backup game :)
yes, green on the modchip = fine, red = not working or turned off. On the external switch blue led = Mod OK or turned on, red = not working or mod turned off.
Ok wonder if someone could offer some advise I have installed V3 of the D2Sun chip using the wii clip, When I power up the wii i get the following the red light flash a couple of time on the d2sun (very Fast) then promptly changes to green, also the blue light on the external switch lights up.. if I understand correctly this chip is working correctly, The only reason I ask is because the drive wont spin at all & the eject button wont work, unless I turn the switch to stop any ideas?
The chipset is a GC2-D2C, and all the switches on the D2Sun are set to off for the Pal..
Cheers for any advise
** Update **
All working now. Had to set the D2Sun to “D2C2” for the chip to work, Clearly the chip on the drive is labelled as a D2C... Just a though perhaps Nintendo are marking these chips wrong to cause problems for modders? Any way as I said all is working now!