I ran The Hermes Installer Installed 223 and 222 then ran it again and merged ios37 and 38 after that i went to Wiiflow and set the settings to Ios223,002 fix,Ios reload on then i start it and all that happens is my Disc Drive light comes on and says: "Please wait" i also tried it with CFG and did not work for me did the same as Wiflow can i get some help on this.
After following 4.1 softmod guide by dogeggs and the OP monster hunter guide - I still can't seem to get it to load :(. Here is some info:
-US wii / US game
-4.1 system menu
-have a updated wiikey chip
-I have a 250gb seagate hdd (loads other games fine - i.e. NSMB)
-ran hermes cios 222 rev 4 (installed 202/222/223 with suggested merge)
-cIOS rev 14 installed
-tried USB Loader GX / Configurable USB Loader both with IOS set to 223 in settings
loading game gets black screen freeze or returns to Wii menu
any help is appreciated :)
I've also been having problems. I know this is most likely my first post in these forums, but please dont judge me by that :P
First of all, I was having the same problem as everyone else: When I started up MH3, it'd work fine until I hit 'Begin Game' or something. Then it'd freeze and make that buzzing sound. So I searched here for an answer.
I installed both cIOS 222 and 223 with the suggested merge, following the guide bit by bit. But now when I attempt to start it up, both USB GX and Cfg USB loaders simply sit there, trying to load it. I cant do anything but press the reset/power button on my Wii. I've figured its just a big game, and that it needs time to load... But I've left it for a few minutes and it still didnt do a thing. And while this is going on, the blue light on my wii/USB keeps flashing. I've tried running the cIOS installer several times, doing the same thing over and over, but its always the same outcome.
I've got a 4.2 USA Wii, and I've got a USA MH3 game. I know I've got the latest GX loader, and I got Cfg from this forum. So I'm assuming thats the latest, as well. And I know I followed the guide correctly, because I've ran signcheck and I have v4 of both 222 and 223. If anyone wants any more data from me to try and figure out whats going on, ask and ye shall recieve. I'll put my signcheck data here too, later, if you guys want. Hope we get this straightened out soon.
EDIT: Correction, GX has a black screen when I try to load MH3.
If you use a USB Loader you must have something hooked into USB (HDD, Flash drive, Card Reader w/Card) and it must be formatted. I took an old 128MB flash drive and formatted and have it left plugged in. If you don't, the 2 particular loaders above will exit if no USB device is plugged in.
Originally Posted by davepm
Never got Neogamma to work. So I'm stuck using USBLoader GX which isnt bad. But for some people they may not have a spare USB Flash Drive laying around it's not an option.
Is there an all in one loader out there that loads from USB, DVD, SD, maybe even WiFi that is configurable? I feel like I'm bouncing around from loader to loader everytime a new game comes out.
Thanks. Work like a charm on 4.1U using WiiFlow 1.1 R25.
One of those methods should work for you, if not all. In such a case you have to rule out the possibility of it being a bad rip of the game itself. Try other rips or methods of ripping it, try other media if it is a hard drive, try a smallerflash drive or try and use an sd card. you have tried configurations, but i'm not hearing about how many rips of the game or what kinds of drive you have used to test it.
Originally Posted by haejuk
Okay, so my problem is my CIOScorp reads and loads the game just fine, but my laser is weird and I get the "Cannot read disc", which is only temporarily solved by ejected and reinserting, and the quality of my DVDs is also not an issue. So in an attempt to get myself playing I tried loading it via CFG USB Loader, IOS249/002 patch, black screen, noise of failure. Now, I came here, followed the instructions, installed the Hermes 223 38 merged with 37, but when I run 223 mload from the CFG USB, it tries to load, but the loader freezes. It doesn't even make it to the game. I'm running on 3.2U, but I'm not sure of the menu version affects anything, but I'm at a loss.
After hours of trying to get it to work, finally got there by using CFG USB loader with IOS 222.
Neither 249 or 223 was having any of it.
Good game and worth the effort to get it working.
I've recently gotten MHTri to work by updating my cIOSes, but I'm having an odd issue where I'm having issues connecting to folks' cities in the game. I've managed to connect at least a few times so I'm not sure what's going on, but the vast majority of times fail.
Port-forwarded my Wii according to ports from a smash bros online portforward guide (figured it uses similar ports)
Tested using USB and Wifi connection, wifi router is approximately 10 feet from Wii.
Game works fine otherwise.
I've seen some posts on folks having it, but none for users with hacked IOSes (most were on capcom unity or other forums). Any ideas?
There izz a God lmao worked a treat bro cheers :cool: worked on Wilflow USB Loader / Ver. 4.2E Pal