You need to remove preloader and go back to step 4 and do everything from 4&5 again. You will first reinstall ios 50, then reinstall system menu 3.4e.
1- download NUS
2- From NUS download IOS50-v4889, and pack as wad
3- From NUS download System Menu 3.4e v386 and pack as wad
4- put those two wad into your wad folder on your sd-drive
5- launch wadmanager form the HBC
6- Install IOS50-v4889
7- Install System Menu 3.4e v386
8- Go to 3-4.1 guide and start @ step 4, follow all directions.
It will reinstall the ios used by your system menu, reinstall the system menu and remove preloader in the process. It should work for you. Preloader does not work with 3.4, when you are done upgrade to 4.1- use the guide and follow the directions. Reinstall preloader at the end of the guide.
d) In the Preloader menu select Homebrew Channel (if you didn't install Preloader then just open HBC as normal), run Wad Manager 1.4, use default settings (IOS249 & SD card) and install these wads from the 'wad' folder:
I did this step too after i installed preloader. Still should works your solution? If yes, i start it now.
Yes it should work. You probably don't need the ios50, but best to install it again anyway- before the system menu.
It worked! Thank you very very much. :) Fantastic