wiikey 2 install screw up
Well I found out after opening my brand new wii that I had a D2E board on the drive covered in that black Epoxy crap. So I looked up some info on removal of the black death and brought the drive with me to work. I used a heat pencil and heated it up to chip it away with a scalpel. I got the first corner done ok and when I went to the second I ended up gouging the board and completely removed the via from where point G is on the install guide.
So i figured my board is scrap. I went ahead and ordered a replacement drive board but I ordered a D2C so I wouldn't have to mess with the epoxy.
I shouldn't have any problems using the D2C board with the WiiKey 2 on my drive should I?