How to Get Monster Hunter 3 (JAPAN) Working and be able to Play Online with it!
***This tutorial is outdated. Please see THIS ONE instead.***
THIS GUIDE CANNOT BE USED BY LU64+/LEH250+ Wii's! PLEASE GET A MODCHIP OR USE AN ALTERNATE WAY TO GET YOUR WII TO BE ABLE TO RUN MONSTER HUNTER 3.
ALSO I TAKE NO RESPONSIBILITY IF YOU BRICK YOUR WII
So you got your "copy" of monster hunter 3 and Want to play it but get an annoying bleep after you press the first option?
Don't worry there is a fix. If you need to patch your Wii to be able to run the new IOS55, then please Setup Guide MH3 English Patch use that to also get your game english patched.
Now I know you can get an easier way of running it but that's for USB Loaders and I Don't have an external HDD so this is my way of getting the game working. It does work for playing online also with USB and backup disc.(not tested either yet)
Gecko didn't work for me so here's what I did.
What you need:
cIOS, Softchip r99 a downgradable wii, monster hunter 3 and also the ability to know how to use a Wii menu in other languages. (It's simple trust me)
1) Get Firmware Downgrader 1.1 from Waninkoko's site and place it into the apps section of your SD Card. Make sure to rename the .dol file to boot.dol otherwise it won't work.
2) Downgrade to the 3.2 of your choice. (best idea to select your own region when you do this)
3) Wait for it to downgrade and then restart your Wii. If you want you can change your shop country code but don't bother.
4)Get AnyRegionChanger and do that same as you did for Firmware Downgrader 1.1 with the boot.dol and keep all the files there (even the source files) and place them into the apps section of your SD card
NOTE: IF YOU SCREW UP YOUR WII, THIS IS BECAUSE YOU DIDN'T FOLLOW THE STEPS PROPERLY
5)Open AnyRegionChanger and follow this guide I found on youtube because I use a 3.2E wii and this one's just easier to follow:
http://www.youtube.com/watch?v=qISSZ...eature=related Just make sure you select Japan instead of the region provided there. They also provide a Japan 3.2 Installation guide in that same video.
6)Reboot Wii, enter HBC and open up wadmanager. Assuming you put the softchip r99.wad in the wad folder of your SD card, install that.
Here's a link to the softchipr99.wad you need. SoftChipR99.wad
7) Open up softchip and make sure you have your Monster Hunter 3 "copy" inside.
8) Use these exact settings and make sure you set your IOS to 55
Game's Language: Japanese
Patch Country Strings: Disabled
Remove 002 Protection: Enabled
Fake IOS Version: Disabled:
Load Requested IOS: Enabled
9) Press A and your now playing Monster Hunter 3
Note:If you wish to play online, in AnyRegionChanger, you can change the shop country code. Just make sure to delete your previous wii shop channel account before doing so. You will lose all of your stuff from the Wii Shop channel that you purchased however, so Only do it if your THAT serious about playing it online. If you do want to play it online, head to the minegarde forums as a lot of people there also play online. Just don't mention that your using a pirated copy. They dont like pirates(... yarr)
Please press thanks on the post if you found the guide useful.
Any information I missed out on, please post It and I will add it. I'm not going to add pictures because I have already semi-bricked my wii by accident going through anyregionchanger once. I'm not doing that again.
I did fix the semibrick though. Any problems with 3.2E firmwares please tell me as I probably had the same problem.
Remember to press thanks on the post if you found it useful!