Bootmii+cboot2 OR AnyRegion Changer for 4.0E brick?
Hi, I have a bricked 4.0E. It boots to black, but the Health+Safety screen comes up sometimes but freezes before 'press A'. Is this classed as a full brick or low-level? SaveMii - Wii Troubleshooting
Before this happened, I had installed bannerbomb HBC and backuplauncher, cIOS7. Then Bootmii as boot2 and DVDX. Did a NAND backup.
It was ok for a while, but then bricked before I was about to install cIOS13b, IOS60 (is this a custom IOS60?) and preloader.
(I'll try to find the guide I used..wasn't this site)
My guess is my system menu or IOS60 (is that what the menu uses?) are corrupt in some way.
In the brick tips http://www.wiihacks.com/bricked-wii-...rick-tips.html
seems to suggest Anyregion Changer will restore the system menu. Does this include a 4.0 system? Will this install system menu 3.2 on my 4.0 system?
Should I be able to boot any of those autoboot discs on 4.0E?
Before coming here, I had tried Universal Unbrick Disc v2 but it just span up the disc and stopped while '4.0E' remained on the screen.
I can get into recovery menu using savemiifrii. Should I use that method to autoboot these or should they boot from the health and safety screen? I tried UUDv2 both ways - nothing.
As I mentioned, I installed Bootmii as boot2 but restoring NAND didn't help.
cboot2 is fairly new and I've searched here for only a few results.
If I understand it, cboot2 replaces the armboot.bin Bootmii expects to find and cboot2 runs and loads whatever dol is on the card (dol must be patched specifically for cboot2).
Before coming here, I only read complicated posts on extracting certain files etc and running cboot2installer via HBC to make the cboot2 files (incl. armboot.bin).
My problem is I can't get into HBC.
So, I see that in http://www.wiihacks.com/recommended-...-4-cboot2.html
it looks like 'SD Card 2' will contain the prebuilt cboot2 files. Is this correct? (I haven't been able to look yet).
In that case, I can use those files and boot the wadmanager from bootmii.
Can I repair my system menu or uninstall whatever I need from that wadmanager? I'm guessing I just need to try installing the E region system menu of some sort.
Which method would be best to try first?
THANKS for any help!
edit: I have a drive chip installed.