Hello 2 every1, very good site you got here. Now to the questions :D .
I have launch console with wiikey and i'm interesting ONLY for the USBLoader. What should i do? I have 3.2 official firmware and nothing else installed (no zelda hack, no wads, no homebrew channel, etc).
if u dont have ur wii softmodded u might want to follow the whole guide. if its is already softmodded and u just want to downgrade, follow steps 2 and 3. that will downgrade all ur ios's to ones that the trucha bug can be used on and will also downgrade ur firmware to 3.2.
this site can explain much much better than me
If you had previously installed the Homebrew Channel and want to go back to add BootMii, just extract the .elf file from the HackMii download and rename it to boot.elf. Then pop it in apps\homebrew_channel on your SD card and run it via the Homebrew Channel.
you can skip the parts you have already dun (or what for the next HBC update that should let you too)
I can't run boot.dol off my SD cards.
I've tried 3 different SD cards 2 x 128mb and 1 x 2GB and all 3 freeze the Wii when I select SD Card from the Wii Channel
The only thing i could think of is I don't have WiiConnect24 set up.
please help i have version 4.0e and have followed the guide to the letter i even ran atchmii sececond and instal dvdx third this makes the screan go black if i follow the instructions iget the error message ret = -1035 lease help
i dont know what to try
http://www.wiihacks.com/recommended-...n-4-0-wii.html before performing step 7g...
UPDATE - don't worry I've upgraded my Firmware to 4.1 and used another Guide that didn't need an Internet Connection.
Thanks for all your help guys.
Firmware is 2.1E and a fellow poster said that could be the reason as the firmware's too old?