I'm a real beginner, so please bare with me!
Originally Posted by Dogeggs
I started out with 3.4E before I began this process. I went through the process without hitch (installing rev9 and IOS60patched with WAD Manager 1.3, to be exact) as described. Restarting, I noticed my Firmware is now 3.1E. I then tried to install the 4.0 updater but after a peroid where it says 'Initializing network, please wait..' it comes up with
Exception (DSI) occurred!
GPR00.. (followed by a black of simliar code)
80039bf8--> 8004002c--> 8003a1b0--> 8004f20
80039bf8: (all three of these have simliar sequences the the first parts here)
Besides that, my installed WADs and everything else is working perfect.
Can anyone advise me as to what I'd need to do to upgrade to 4.0? Any help would be seriously appreciated!
try the official update instead - once it is done run ios downgrader and install the patched ios60.
Well, i had a little experience with this kind of situation and the problems is in the fact that you installed the cIOS38 Rev13b, you should use the cIOS38 Rev13, Yes, that you just read, The 13 version not the 13"B" version...
I started doing this, using the Punch-Out!! disc to upgrade to 4.0E, but for some reason beyond my meagre understanding the Homebrew Channel and all my apps and WADs are still working perfectly. To say I'm happy is an understatement.
Originally Posted by Dogeggs
is 4.0E more up to date...I have the 4.0U and punch out disk is asking for a system update. the letter U is higher than E, not understanding here.
Originally Posted by Syferus
From my small understanding, I thought the letters represent the region you're in, but I'm honestly unsure now that you mention it.
Originally Posted by zomby22
Interestingly, on the setting menu it tells me I'm on 3.4E now, but I can play 4.0 update games like Punch-Out!!. Honestly I don't know what's up, but I'm able to play what I wanted to now. Any way to concretely check what firmware it is?
I trying installing the wads (37,38,53,55 ios60 and 249) by placing them in the wads directory in the root but they dont show up in the wadmanager, although my other wads show up there.
what am i missing here? how can i install those wads then?
my wii is 3.3U and already has a custom IOS37-64-v2070.wad installed.
Are you using WAD Manager 1.4 ? it should show. For me I was just easy to use the firmware 4.0 updater, it automatically downloaded all the ios and installed it itself, then use bannerbomb to reinstalled homebrew and you are set.
Originally Posted by mahjong
I am using the 1.3 wad manager and it just does not show any of the ios .
so u r saying to go ahead and use the 4.0 firmware updater now? b4 installing the required ios?
Should I delete ios37?! I also have custom IOS installer from wanikoko on HBC, but I guess thats just for installing ios37.