I'm having a problem installing my virtual console wads to the emulated nand with showmiiwads. No matter which folder or individual wad file I choose I get an error message that says, "Access to path '(the path my wads are stored on my computer)' is denied". Anyone know what's wrong or know of another program I can use to install my wads to the emulated nand? Thanks.
Try running as administrator
Sent from my C6603 using WiiHacks
I had that problem when the files were in a folder on the root of the HDD. If thats where yours are, move them somewhere else, like to your desktop.
Tried this guide last night and could not pull it off.. got as far as running wad manager but my wii mote stops working and I can't press A to proceed.
I can download cover art and the games added using showmiiwads show up. just to check I then tried running usb loader gx and any wii game that used to work before, I get to the wii mote usage & warning screen but then the screen goes black and wii mote again stops working. after this the wii motes have to be resynced to work.
I've been using wiiflow and gx (older version) before without any problems, my wii games run off the hdd just fine. Loading other loaders from sd card and playing games still works..
What am I missing here? thnx!
As a side note, I'm wondering if I'm supposed to have the sd card prepared in the soft mod any wii guide in the wii or not when using this guide? this was asked before but didn't understand this yet.
SpoilersysCheck v2.1.0b19 by Double_A and R2-D2199, Nano...runs on IOS58 (rev 6176).
System Menu 4.0/4.1E (v54450)
Drive date: 2008.12.18
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Console ID: 149645712
Found 118 titles.
Found 55 IOS on this console. 6 of them are stub.
IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5662): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202 (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222 (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224 (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245 (rev 21007, Info: d2x-v7final): Trucha Bug, NAND Access, USB 2.0
IOS246 (rev 21007, Info: d2x-v7final): Trucha Bug, ES Identify, NAND Access
IOS247 (rev 21007, Info: d2x-v7final): Trucha Bug, NAND Access, USB 2.0
IOS248 (rev 21007, Info: d2x-v7final): Trucha Bug, NAND Access, USB 2.0
IOS249 (rev 21007, Info: d2x-v7final): Trucha Bug, NAND Access, USB 2.0
IOS250 (rev 21007, Info: d2x-v7final): Trucha Bug, NAND Access, USB 2.0
IOS251 (rev 21007, Info: d2x-v7final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
Report generated on 2013/06/25.
Which WAD manager are you trying to use? If an older one and you have a newer remote, you'll have to use a newer wad manager. I'd suggest Wii Mod 3.2 (comes with ModPack in Chapter 2 of Softmod Any Wii guide). It will work with the newer remotes.
Unrelated, your system is slightly out of date with v7-final cIOS's instead of v8-finals. Going through the same ModPack mentioned above and performing the installation steps in the guide will get those updated.
If your system was never 4.3, it would be a good idea to also install the IOS Update pack (also in chapter 2 of the same guide) to make sure that is updated as well.
The guide is linked in my signature.
EDIT: Got the emunand to work now with virtualconsole and wiiware. don't know what the problem was. I was fiddling so much that I lost track of what I could have caused what. Still can't get gamecube games to work but its due to the app (can't remember the name) thats supposed to prepare the isos for use with diosmios, it doesn't work with my computer.. never was too fond of the gamecube anyways so I will let it be for now. anyways, I have my gamecube in the attic should the need arise. =)
so thanks for the excellent guides and all the help!!!
as a final question, if somebody knows: the vc titles work pretty well with the emunand, but some nes and n64 titles fails to load (blackscreen or freeze at the "you need the classic controller" screen). I have a pal wii and the vc titles are from a very good source of us wads. most of the stuff works when I choose "force ntsc" and patch country strings to "on". I can't find a manual for usbloader gx, what does all the settings do, any other video modes or settings I should try with the games that still don't load? (as I got some comments about piracy (apparently?) in another thread I will state that I own all these games in the form a huge mountain of plastic up in the attic. it's just that the wife doesn't allow all that in the living room.. ;) and I really want the games in us versions because pal gaming sucks, being slow and letterboxed. more here: http://www.nintendolife.com/news/201...es_pal_problem )
Does Dios Mios still won't allow you to play any disc games that they are not compatible with. When I installed Dios Mios following the guidelines, I put in 007 Everything Or Nothing disc on my wii and tried to play it but it will have that Dios Mios logo on and then a black screen. I found out that Dios Mios is not compatible with the game so I assume that it the reason I can't play the game. So do Dios Mios still does this?
I just resoftmod my wii (my last softmod was almost 2 years ago with the softmod anywii guide
anyway i got a problem with usb loader gx it stucks when i try to download covers etc... any suggestions?
thx in advance