im new n i niid help
i have a bricked wii with 4.3u firmware.
it had been hacked for a few years and was also just recently updated i followed this guide i found
and every thing went fine it showed that it had 4.3u firmware and had all the most up-to-date ioses
but i had to use gecko os to load games avoiding the disc updates so i got priiloader and did the block disc updates it worked
then after that i went the extra mile and wanted to block the health warning screen i turned my wii off for a few days and when i turned it on i was greeted with the black screen no error code just black. i would be grateful for any expertise on this issue
I have moved your post to the Bricked Wii section. We appreciate the introduction, but that thread is just for that, not for bricked Wii issues. Might want to post another thread there just to say hello. :)
Can you access priiloader?
Can you get into priiloader?
Sent from my Motorola Electrify using WiiHacks
alright thks n no when i hold down reset n turn it on i get nothing
nope i also didnt do a nand back up
Does the screen flash or anything at all happen? Did you check to make sure all the cables are plugged in securely?
my tv gets a signal from my wii and i can hear the disc drive and fan working but thats it
Remove sd cards, usb stuff, gc stuff. Hold reset and power on the wii, keep holding reset. Priiloader? Make sure your cables are connected. Boot2 Bootmii? No boot2 bootmii, that sucks. You must have a nand backup at sometime in the past two years. No? that would also suck. There is no obvious reason your wii would not work. Unplug it, check your wires, etc, try try try again.