Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 4.3U help needed - I've tried EVERYTHING, please.

  1. #1
    New Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    3
    Thanked 0 Times in 0 Posts

    4.3U help needed - I've tried EVERYTHING, please.

    Please, i'm simply don't know what else to do, everything i've tried, it gives me a dead end.
    I'll try to remebered and explain everything i did, what i have searched and all:

    THE PROBLEM:
    ------------

    It happened when i was tring to put USB-loader on my friend's Wii (it's a LU66, it's on 4.3U Wan), and in the process i remebered to install some version of the ios36 (to install Hermes 222, i think, and make Metroid Other M works past the tutorial - it freezes), and after that, my homebrew channel loads, but none of the apps in there loads, i can't get ANY .dol or .elf to work, the screen just goes black and system hangs.

    THE SOLUTIONS I'VE TRIED:
    -------------------------

    1. First thing, i've opened the Homebrew Channel (my version is 1.0.6) and there was a update warning (to 1.0.8), when i tried to update it, the hackmii installer told me i didn't have any IOS vulnerable to do it (searching for informations, this happened because some cioscorp installed, and hackmii team don't give any support), So i restarted and tried again, next time, it froze in the scam page, during "press (1) to continue", tried AGAIN, then it froze during cam page, BEFORE "press (1)...", and since then, it always hangs in this part, so...

    2. I thought to re-softmod it, but since the wii is on 4.3, the only way i could load something was with the Indiana Pwns, i've downloaded a backup (which still runs, thru Disc Channel) and tried this method, and after the exploit was done, appears a black screen/white text, saying it found a valid boot.dol(or .elf, can't remember), but it hangs there, so...

    3. I've tried to load Bootmii, which i could open thru Homebrew Channel, when its loaded, i've opened the SD menu, and tried running ANYTHING from there, to always get the same message: "failed to boot selected file", and one of the things i've tried was the hackmii installer, same error. Still in Bootmii, i've tried to restore NAND (which i had made a backup, luckily), and in the restore screen, it says that bootmii is not installed and it would be dangerous to go on, and even so, i've tried to continue (asked to press A+B+Y+X to go on) but it's IMPOSSIBLE, it always says that i had pushed some other combination of buttons and quit (i have searched the net, it's a "bug" from this version of mine of Bootmii - 1.1), so...

    4. I've searched for a new Bootmii, a more recent one, so i could bypass this latest problem, but it just ends like problem 1, can't install hackmii.

    5. I've tried all 4.3 guides from GBAtemp and wiihacks, but it ends freezing during Indiana Pwns, trying to load boot.dol(.elf).

    6. I've tried downloading ModMii 4.2.3, and tried their solution, same problem.

    7. I have found this Black Screen App Fix Guide (http://www.wiihacks.com/general-home...n-app-fix.html), but loading the boot.dol from SD menu ends up with Error#004 (probably because my system is 4.3). I've also tried to load this boot.dol from Indiana Pwns, same freeze as problem 1.

    8. I've tried to load Dop-Mii, to check and (maybe fix) my IOS, with no success.

    9. Lastly, and that's when i got really freaked out, i've tried to make an official update, from settings menu, it makes the test connection and give me an error code: 32007, and tells me to check my internet configs, but they are working.

    OTHER INFORMATIONS THAT COULD BE USEFUL:
    ----------------------------------------

    - Yes, the Wii Connect24 is off

    - Before all of this, this wii could load any gamecube games and most of the wii games, like Metroid Prime Trilogy (DVD9 burned) and Mario Galaxy, but Mario Galaxy 2, New super Mario Wii and Tatsunoko vs Capcom, always gave me an "Exception (DSI) occurred!... STACK DUMP" error, which i could never pass by.

    - Before this problem, i have managed to play some games with usb loader, and mario galaxy 2 WORKED thru USB.

    - Everything i've tried, i tried with two different SD cards (one SanDisk 2gb, one Matsuca 1gb that came with my digital camera), and both cards formatted FAT and FAT32. The only difference was that, sometimes, when i was entering the art room in Indiana, nothing happened, it was like a wall, so i look for other characters, switched and they could enter, but not Indy (weird...).


    ANYONE?! just say it, i'll try ANYTHING, please!

    If i managed to resolve this, i promise i'll post the method here so anyone who could be going thru this can be helped too.


    Thank you all, in advance, for reading all of this and trying to help me.

  2. #2
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,571 Times in 2,972 Posts
    Blog Entries
    15
    Backup your sd-card, format your sd-card
    Extract cboot2.zip to sd:\
    Extract IOS36-FIX_CB2-BB1.zip to sd:\
    Load the HBC, click [HOME] on the wiimote, launch bootmii
    wadmanger will load
    Install ios36
    format the sd-card and copy back your files you had.

    If that fails, copy back your original file
    Download the hackmii installer 0.8, extract the bootmini.elf to sd:\
    Load bootmii, go to the sd menu and load the bootmini.elf
    Install HBC
    Hackmii_0.8_bootmini.zip
    Last edited by mauifrog; 08-27-2010 at 02:08 PM.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  3. 1 User Says Thank You mauifrog For This Useful Post


  4. #3
    New Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Thank you for your answer, but i actually tried this one out, just didn't remebered, i've tried again now, it loads, but on the third line it freezes, before loading wadmanager (my screens cut a part of the text on the left side, and the white text in black background gets a little blurr, but it says "(I?)OS successfully loaded." and just stays like this. Wiimote is off, and when i push A, i ttries to connect, blinks nad goes off again...

    but thank you for your help!

  5. #4
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,571 Times in 2,972 Posts
    Blog Entries
    15
    Quote Originally Posted by AndrehF View Post
    Thank you for your answer, but i actually tried this one out, just didn't remebered, i've tried again now, it loads, but on the third line it freezes, before loading wadmanager (my screens cut a part of the text on the left side, and the white text in black background gets a little blurr, but it says "(I?)OS successfully loaded." and just stays like this. Wiimote is off, and when i push A, i ttries to connect, blinks nad goes off again...

    but thank you for your help!
    That is because it is trying to load/patch ios36, which is crap in your case. You installed ios36-v1040 which is no good. Try the bootmini.elf, if that fails you will need to use indiana pwns or smash stack to install hackmii 0.8, unless you have the bannerbomb2 hack enabled in priiloader. Do you have priiloader?
    If you have priiloader extract hacks.ini to sd:\
    Hold reset and load priiloader
    Go to system menu hacks, enable bannerbomb v2
    Then load the wii menu, with the ios36fix files on sd:\
    Click the sd icon, bootmii will load
    install ios36
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  6. 1 User Says Thank You mauifrog For This Useful Post


  7. #5
    New Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Well, again, i've tried that but didn't remembered.

    I've tried the Bootmii --> hackmii 0.8 mini install, but hangs in a green screen when loading...

    i'm not sure about priiloader, it was on my friend's SD card when i got it, but i tried to load it now (holding reset when turning it on) and didn't load it.
    I've already tried booting hackmii installer thru indiana pwns, and locks with the message "Valid .elf found..." something, something... and hangs...

    I'll try the priiloader and indiana pwns once more, i'll post the results...


    THANK YOU SO VERY MUCH, for trying to help me... seriously!

  8. #6
    New Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Well, Priiloader is not working, holding reset during boot, nothing happened, just the health screen... obviously, tring to install priiloader, gives ma a black screen when loading trhu HBC.

    Now, this is new, i've tried to load the bootMINI.elf from hackmii 0.8 and in the white text/black screen, showed me this message:

    "Valid ELF image detected.

    Exception 0300 occurred!"

    and a bunch of numbers below that (hex codes, perhaps?)

    still, no solution... =(

    i think i'm gonna cry...

  9. #7
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,571 Times in 2,972 Posts
    Blog Entries
    15
    Quote Originally Posted by AndrehF View Post
    Well, Priiloader is not working, holding reset during boot, nothing happened, just the health screen... obviously, tring to install priiloader, gives ma a black screen when loading trhu HBC.

    Now, this is new, i've tried to load the bootMINI.elf from hackmii 0.8 and in the white text/black screen, showed me this message:

    "Valid ELF image detected.

    Exception 0300 occurred!"

    and a bunch of numbers below that (hex codes, perhaps?)

    still, no solution... =(

    i think i'm gonna cry...
    Try to format the sd-card with sdfv2003.exe
    Then extract Hackmii_0.8_bootmini.zip with 7-zip
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  10. 1 User Says Thank You mauifrog For This Useful Post


  11. #8
    New Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Thank you mauifrog, for helping me, i have posted the same post here and @ gbatemp, and a user there gave me the solution:

    ----------------------
    As promised, the workaround was running the Trucha Bug Restorer that Sao Mortel, from GBAtemp foruns, linked (Trucha Bug Restorer 1.13 MOD 4.3 by R2) and restoring IOS36, i've downloaded the other files diretcly thru NUS, from the app.
    ----------------------

    now, everything's back to normal! Thank you so very much!

  12. #9
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,571 Times in 2,972 Posts
    Blog Entries
    15
    Quote Originally Posted by AndrehF View Post
    Thank you mauifrog, for helping me, i have posted the same post here and @ gbatemp, and a user there gave me the solution:

    ----------------------
    As promised, the workaround was running the Trucha Bug Restorer that Sao Mortel, from GBAtemp foruns, linked (Trucha Bug Restorer 1.13 MOD 4.3 by R2) and restoring IOS36, i've downloaded the other files diretcly thru NUS, from the app.
    ----------------------

    now, everything's back to normal! Thank you so very much!
    I am supprised that TBR loaded, I would have thought I would black screen on you. You loaded it from HBC? I will keep that in mind, glad you fixed it.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  13. #10
    New Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    3
    Thanked 0 Times in 0 Posts
    actually, nothing i loaded from HBC was working, just black screens... so i put the TBR as boot.elf and run thru Indiana Pwns, that worked!

    anyway, again, thank you so much for your attention!

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •