Page 1 of 5 123 ... LastLast
Results 1 to 10 of 43

Thread: New Wii Disney Infinity game won't play on HB or Disk, error appears

  1. #1
    New Member
    Join Date
    Jun 2011
    Location
    SoCal
    Posts
    73
    Thanks
    18
    Thanked 6 Times in 6 Posts

    New Wii Disney Infinity game won't play on HB or Disk, error appears

    I'll be quick, I bought the new Wii Disney Infinity game and we can't play it. I loaded it into my HDD and tried to play it via Homebrew as well as disconnecting my hard drive and playing it straight on my Wii unit and I get an "error 002" in one method and a similar error eject the disc" the other way. It comes with a pad similar to Skylanders BTW which I plugged into the rear usb top port (I plug my HDD into the bottom of course).My specs. HB R8 Beta 14 Rev14 IOS249 It's a Wii 4.2 I've never updated my Wii. My son has waited patiently for 2 days while I've failed to start the game, any ideas? Thanks much I'm terribly sorry I missed the edit button, I haven't posted to a site in a long while. Yes, I saw the "format" instructions plainly and I have, to FAT 32 as it says..I was in a bad motorcycle wreck and take some powerful meds to deal with 10 blown discs in my spine, it's difficult not to make simple mistakes at times, I do my best. I will not over-post again. Edit; I've removed my accidental over-posts. Hey Night, my update is going very well, thanks..I found the iosupdate within bootmii.
    Last edited by wyattspoppa; 08-21-2013 at 11:27 AM. Reason: solved my own issue

  2. #2
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    18,311
    Thanks
    1,803
    Thanked 4,246 Times in 3,571 Posts
    Blog Entries
    5
    That's definitely an out of date softmod. Start this guide at the spoiler entitled, "Softmods with HOMEBREW CHANNEL installed" as can be found below Chapter 1, Part 1. Run through the rest of the guide. That should have you good to go.

  3. 2 Users Say Thank You to nightstah For This Useful Post


  4. #3
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    18,311
    Thanks
    1,803
    Thanked 4,246 Times in 3,571 Posts
    Blog Entries
    5
    Sure thing; let us know how it goes

  5. 1 User Says Thank You nightstah For This Useful Post


  6. #4
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    18,311
    Thanks
    1,803
    Thanked 4,246 Times in 3,571 Posts
    Blog Entries
    5
    You shouldn't need the internet for the purposes of following the guide. If you're following the guide you should know the answer to your latter-most questions (it tells you to FORMAT the card like three times throughout the guide and exactly how to format it). Please don't "triple post," use the edit button if you forgot something.

  7. 2 Users Say Thank You to nightstah For This Useful Post


  8. #5
    New Member
    Join Date
    Jun 2011
    Location
    SoCal
    Posts
    73
    Thanks
    18
    Thanked 6 Times in 6 Posts
    Nightstah. am I using the "edit" option properly now? It looks like I'm just making my original post a longer paragraph, it seems like an eye sore for anyone reading it later to learn what you've taught me. Thank you Sir
    Last edited by wyattspoppa; 08-21-2013 at 10:08 AM.

  9. #6
    Member
    WiiHacks Staff
    Moderator
    IRC AOP
    Only site donators may send a PM to WiiHacks Staff
    llaffer's Avatar
    Join Date
    May 2010
    Posts
    3,239
    Thanks
    355
    Thanked 1,022 Times in 872 Posts
    If someone replies to your message, you can then reply to it without a problem.

    We just don't want people replying to themselves. Since I replied to you, you can add content in a reply now.

    And that's what enter keys and white space is for if you think you're building a wall of text.

    So, where are you in the modding process, presuming you are using Softmod Any Wii Guide?

    Click Below for recommended Links


  10. 1 User Says Thank You llaffer For This Useful Post


  11. #7
    New Member
    Join Date
    Jun 2011
    Location
    SoCal
    Posts
    73
    Thanks
    18
    Thanked 6 Times in 6 Posts
    Now I get it!!! Thanks. I've either been double-posting or replying to myself for as long as I've been here, no one explained it so clearly, I'm grateful Mod. The Mauifrog guide went flawlessly, I'd never gotten past part 1 before. Ok, so it's all good but the game (new Disney Infinity with usb pad to attach) won't play unless my Wii is updated to the current state. I know we're not to update our modded Wii's so I'm stuck. If I'm allowed, I can post the "known issue" on Disney's Infinity site for you to see. Thanks so much

  12. #8
    Member
    WiiHacks Staff
    Moderator
    IRC AOP
    Only site donators may send a PM to WiiHacks Staff
    llaffer's Avatar
    Join Date
    May 2010
    Posts
    3,239
    Thanks
    355
    Thanked 1,022 Times in 872 Posts
    If the game is still asking you to update the system, then you didn't completely follow the guide. The end of Chapter 2 has you install and configure priiloader which will block disk and network based updating, if you configure it correctly.

    If you've think you've done everything else and still having problems with it, post a fresh syscheck (link for how to do so is in my signature) and we can give you direction from there.

    Click Below for recommended Links


  13. #9
    New Member
    Join Date
    Jun 2011
    Location
    SoCal
    Posts
    73
    Thanks
    18
    Thanked 6 Times in 6 Posts
    I should be more specific. The game isn't telling me anything, it's just failing to launch past the "connect the Infinity base". In Nintendo's fact base, it explains the reason Infinity won't launch is a non-updated Wii, and mine is surely that. I did install Priiloader properly and selected the things we're told to block, line-by-line. Of the entire guide, the only section I didn't "complete" was the update to 4.1 since I have a 4.1. I can post the Nintendo "fact base" link if permitted so you can see why I can't launch the game within a Wii that hasn't been updated. Thanks Oh, I also wasn't able to do the Neogamma R9 Beta 56 loader thing because the link was dead, but doubt it's relevant.
    Last edited by wyattspoppa; 08-21-2013 at 03:33 PM.

  14. #10
    Member
    WiiHacks Staff
    Moderator
    IRC AOP
    Only site donators may send a PM to WiiHacks Staff
    llaffer's Avatar
    Join Date
    May 2010
    Posts
    3,239
    Thanks
    355
    Thanked 1,022 Times in 872 Posts
    Are you trying to launch it from the disk? or from a USB loader?

    If disk, it should work since your IOSs should be the same (for the most part) as a normal Wii (if you did the modding guide right).

    If USB loading, then you have to pick the cIOS to run the game on. I'll check the skylander's guides to see what they say to use. You should probably use the same cIOS in the loader's game settings.

    EDIT: http://www.wiihacks.com/wii-games/98...ure-guide.html This guide says to try 247 or 223. Try each of those in your USB loader game settings to see if either of them works.

    If not, post a syscheck so we can see what you did to your system.
    Last edited by llaffer; 08-21-2013 at 03:56 PM.

    Click Below for recommended Links


Page 1 of 5 123 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •