isnt there a way to make sure what is causing the problem and so we would know its something like darkcorp or its just the sd card ?
Last edited by Pancakes12; 08-20-2013 at 06:44 AM.
The only way is by what we are doing - elimination by trying each thing in turn
well if il buy an sd card and it wont work it will be more profitable to just send it to be fixed and hacker in a lab
The cost of a 2 gig SD card is negligible. Sending this off to someone would incur shipping two ways, which to me would be insane. But to each his own.
I have another trick you can try. Format your SD card. Unzip the letterbomb thing that you've been using onto it. On the root directory, rename boot.elf to boot.elf.bak or delete it. Get a copy of the WiiMod dol, put it on the root directory of the card. Rename it to boot.elf. Then put the card in the wii, and attempt to launch via letterbomb. If you can get wiimod to load, post back and we can work something out.
i manged to load wiimod what now ?
Grab http://www.mediafire.com/?gvobket807cmlph. LEAVING EVERYTHING YOU HAVE CURRENTLY ON YOUR CARD, from this archive take ONLY THE WAD FOLDER and put it on your SD card. Put card in Wii, do letterbomb again, should load Wiimod. Go to wad manager, and install all the wads in this folder.
You should then be able to do a standard HBC install.
FYI, this is a slight variation on Maui's post: http://www.wiihacks.com/recommended-...am-freeze.html
it says error -2011 on all of wads