Results 1 to 6 of 6

Thread: ShowMiiWads - Change a WAD to install to a different slot

  1. #1
    New Member
    Join Date
    Feb 2012
    Posts
    14
    Thanks
    0
    Thanked 0 Times in 0 Posts

    ShowMiiWads - Change a WAD to install to a different slot

    I'm trying to get Majora's Mask to play with EmuNand. So far, USBLoader GX gets the black screen after the spinning "N". Mighty Channels has the same, but this is the d2x thing, and Mighty Channels won't work with the Hermes stuff, which I have installed on the 22# slots.I read on a post on another forum where Majora's Mask will work, but requires Waninoko's CIOS38 rev17 installed. Which sounds just fine to me. Except the installer is trying to force me to install on IOS249, which I'm not willing to do.One poster in that forum said Mighty Channels + rev17 worked fine on IOS252, which is what I'm trying to get it installed on. The only problem is I don't know how.From what it said, ShowMiiWads can be used to change the IOS slot a wad is installed to. I just don't know how to set that up with SMW. And that the installer app may need to be tweaked in order to point to 252 instead of 249.Can someone help me? I really love Majora's Mask, but it takes way too much NAND space to keep it on my Wii. And the only alternative is to use Wii64.

  2. #2
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    18,212
    Thanks
    1,784
    Thanked 4,211 Times in 3,541 Posts
    Blog Entries
    5
    You're confused, lol. That cIOS38 Rev 17? That goes in slot #249. That being said, nowadays wiihacks recommends a different base for that slot and a much-newer cIOS than Wani's. Have you followed our "Softmod ANY Wii Guide"?

  3. #3
    New Member
    Join Date
    Feb 2012
    Posts
    14
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Well, my Wii was softmodded back in Jan/Feb of last year. Since I received it, however, I have upgraded the installation to D2X v8 in the 249/250 slots, and Hermes 5.1 in the 222/223/224 slots. Which I use for my Wii games.

    This is primarily just for running the VC game, Majora's Mask. Which runs fine on my Wii, but takes up too many blocks. I used ShowMiiWads to install it to the EmuNand on my SD card. In USBLoader GX, it shows up fine, but blacks out after the spinning "N". In Mighty Channels, it does the same thing.

    The culprit here is having d2x installed in the 249 slot.
    FIX94 said
    It still won't work with d2x, only with waninokos r17 cIOS.
    This is from a forum post on gbatemp, btw.

    Later in that thread, the following is stated:
    AbdallahTerror said:
    Edit: even easier option install wanin cIOS rev17 to slot 252 and run it with any loader using this IOS
    tmv_josue says that that will work, especially with Mighty Channels, the app I'm trying to use, since UGX requires a d2x cIOS to work with EmuNand, which effectively disables Majora Mask from working.

    There is another post about using ShowMiiWads to edit a WAD to change which IOS it is installed to. But I can't for the life of me find it now, only a few hours after reading it.

    Anyway, that's why I came here to post and look for help. Mighty Channels won't work with Hermes, so only the d2x slots function for it at present. If I can, I'd like to change the cIOS 38 to install to 252, since nothing else I have uses that, and I could then set MC to load with ios 252 in it's argument. And with luck it would allow me to play Majora's Mask.

    Of course, if anyone knows another way to bypass the black screen and can get MM working in EmuNand, I'd be happy to go with that option instead. ;-)

  4. #4
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Senior Moderator
    Game Master
    cjizzle's Avatar
    Join Date
    May 2009
    Location
    Southeast Ohio
    Posts
    6,131
    Thanks
    1,430
    Thanked 2,520 Times in 1,861 Posts
    Its pretty simple to change the slot an IOS is installed to. Simply select the wad in showmiiwads, right click and select Change IOS Slot, then type in the slot you want to install that wad to. Dont forget to rename the wad to reflect the correct slot (just so that you dont get it confused with any others)

  5. #5
    New Member
    Join Date
    Feb 2012
    Posts
    14
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Well, the 252/rev17 was a bust. Apparently the poster was misinformed, as MC informed me that wanin's cios was unsupported.

    I have had some success after a few more hours of searching. I've since downloaded and installed uLoader 5.1e, and deleted/reinstalled Majora's Mask via it's feature. After a bit of searching and selecting Skip Boot in the options for MM, it worked successfully. :-)

    Now I'm deliberating whether to rename my console FrankenWii, given all of the apps and modifications on it.

  6. #6
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,168
    Thanks
    307
    Thanked 9,559 Times in 2,969 Posts
    Blog Entries
    15
    Install the d2x cios for all base ios into slot245-250. This would be done via chapter 2 of the softmod any wii guide. Then instead of 249/250, try 245-248.
    IOS245 (rev 21008): Trucha Bug, ES Identify, NAND Access, USB 2.0 -base IOS37-v21d2x8 final
    IOS246 (rev 21008): Trucha Bug, ES Identify, NAND Access, USB 2.0 -base IOS38-v21d2x8 final
    IOS247 (rev 21008): Trucha Bug, ES Identify, NAND Access, USB 2.0 -base IOS53-v21d2x8 final
    IOS248 (rev 21008): Trucha Bug, ES Identify, NAND Access, USB 2.0 -base IOS55-v21d2x8 final
    IOS249 (rev 21008): Trucha Bug, ES Identify, NAND Access, USB 2.0 -base IOS56-v21d2x8 final
    IOS250 (rev 21008): Trucha Bug, ES Identify, NAND Access, USB 2.0 -base IOS57-v21d2x8 final
    IOS251 (rev 21008): Trucha Bug, ES Identify, NAND Access, USB 2.0 -base IOS58-v21d2x8 final

    Probably 246 would work.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •