Wii softmod from 3.1E

Hello,

I have just obtained a second hand Wii with system menu 3.1E. My goal is to make it possible to play backups.
I put BannerBomb and BootMii on an SD Card and installed both. I apparently am lucky to be able to install BootMii as boot2.

So now I have this installed, what are the next steps to achieve the goal of being able to play backups?
I was unable to find a clear guide for this situation, where BootMii is installed as boot2 on a 3.1E system.

Do I need to do reintroduce the Trucha Bug ?
Or can I skip this since I'm on 3.1E ?
Then how do I proceed ?

Thanks for your suggestions.

Use the Softmod Any Wii guide (link in my sig).

Thanks dniMretsaM, I tried and I am stuck in Chapter 2, Part 1- Wad installs. I have WiiMod 3.2 on the SD card but it won't load from HomeBrew Channel. When I select WiiMod in HBC and press "Start" I see in a flash a dialog with loading bar, it goes so fast I can't see or read what it is and then I get a black screen and nothing works anymore. I reboot and try again but it stays the same.

I've done a SysCheck and here's the log of that:

Spoiler

sysCheck v2.1.0b17 by Double_A and R2-D2199
...runs on IOS36 (rev 1042).


Region: PAL
System Menu 3.1E (v258)


Drive date: 2006.09.07
Homebrew Channel 1.0.0 running on IOS36
Hollywood v0x11
Console ID: 45422161
Boot2 v2
Found 38 titles.
Found 19 IOS on this console. 1 of them are stub.


IOS4 (rev 3): Stub
IOS9 (rev 516): Flash Access
IOS11 (rev 10): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS12 (rev 6): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS13 (rev 10): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS14 (rev 257): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS15 (rev 257): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 512): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS20 (rev 12): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS21 (rev 514): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS22 (rev 772): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS28 (rev 1288): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS30 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS31 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS33 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS34 (rev 1039): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS35 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS36 (rev 1042): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS254 (rev 65281): BootMii
BC v2
MIOS v5


Report generated on 2012/12/17.
Report generated on 2012/12/17.

Any advice?

Also:

Spoiler

Serial number: LEH126143xxx
The Wii has a RVL-001(EUR) model number and is produced for the European market. The copyright year is 2006.

You need to start in Chapter 1, Softmods with Homebrew Channel Installed. It will install IOS58 then reinstall the HBC so that it runs on IOS58. Then everything should work.

Hi, I managed to get all WADs installed with WAD Manager and MMM. Then I completed the rest of the guide. I even updated the System Menu to 4.1E (using MMM instead of WiiMod).

So my question now is:

Is it safe now, after all I've done to start the guide over from scratch? Or should I remove (clean up) things first?

Quote:

---

Originally Posted by snokiedeath

Hi, I managed to get all WADs installed with WAD Manager and MMM. Then I completed the rest of the guide. I even updated the System Menu to 4.1E (using MMM instead of WiiMod).

Something is still wrong, I tried to load a VC WAD today (Installed with MMM) and the channels appear in the Wii Menu but when I run them the Wii freezes on a black screen.
I will try USB Loader tomorrow, I'm waiting on a USB drive.

So my question now is:


Is it safe now, after all I've done to start the guide over from scratch? Or should I remove (clean up) things first?

---

Where did you get said WAD? We don't support copyright infringement on this site.