Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Warioware: Smooth Moves issue black screen. Data info included.

  1. #11
    Junior Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    SYSCHECK BELOW.
    IOS9 is there. I upgraded to the newest version using dop-mii just in case that made any difference. Midway through doing it i realized that i had played the actual disc version on the wii ages so the IOS must have been on the console to begin with. I am going to rule out IOS9 then, Warioware isn't listed on that link Nightstah and neither is Mario Party 8. Constant searches on this site and wiiscrubber lead me to the conclusion that they needed IOS9 to run, but i don't know if that is genuinely true as it doesn't appear to be listed in the aforementioned link.

    The differences i can see between my systemcheck and yours Stomp is that your IOS36 is a higher version than mine and that IOS30/31 are enabled on yours but disabled on mine. If there are any glaring problems on my systemcheck please do point them out.

    "DOP-Mii Report"
    "Region", Europe (E)
    "Hollywood Version", 0x11
    "Wii Unique DeviceID", 68888391

    IOS Version, FakeSign, ES_Identify, NAND, Flash
    "250 (v65535)",Enabled,Enabled,Enabled,Disabled
    "249 (v17)",Enabled,Enabled,Enabled,Disabled
    "224 (v65535)",Enabled,Enabled,Enabled,Disabled
    "223 (v65535)",Enabled,Enabled,Enabled,Disabled
    "222 (v65535)",Enabled,Enabled,Enabled,Disabled
    "202 (v65535)",Enabled,Enabled,Enabled,Disabled
    "61 (v5405)",Disabled,Disabled,Disabled,Disabled
    "60 (v6174)",Enabled,Disabled,Disabled,Disabled
    "55 (v5406)",Disabled,Disabled,Disabled,Disabled
    "53 (v5406)",Disabled,Disabled,Disabled,Disabled
    "50 (v4889)",Disabled,Disabled,Disabled,Disabled
    "38 (v3867)",Disabled,Disabled,Disabled,Disabled
    "37 (v3612)",Disabled,Disabled,Disabled,Disabled
    "36 (v3094)",Enabled,Enabled,Enabled,Disabled
    "35 (v1040)",Enabled,Enabled,Enabled,Enabled
    "34 (v1039)",Enabled,Enabled,Enabled,Enabled
    "33 (v1040)",Enabled,Enabled,Enabled,Enabled
    "31 (v2576)",Disabled,Disabled,Disabled,Enabled
    "30 (v2576)",Disabled,Disabled,Disabled,Enabled
    "28 (v1288)",Enabled,Enabled,Enabled,Enabled
    "22 (v772)",Enabled,Enabled,Enabled,Enabled
    "21 (v517)",Enabled,Enabled,Enabled,Enabled
    "20 (v12)",Enabled,Enabled,Enabled,Enabled
    "17 (v512)",Enabled,Enabled,Enabled,Enabled
    "15 (v257)",Enabled,Enabled,Enabled,Enabled
    "14 (v257)",Enabled,Enabled,Enabled,Enabled
    "13 (v10)",Enabled,Enabled,Enabled,Enabled
    "12 (v6)",Enabled,Enabled,Enabled,Enabled
    "11 (v10)",Enabled,Enabled,Enabled,Enabled
    "9 (v778)",Disabled,Disabled,Disabled,Disabled
    "4 (v3)",Enabled,Enabled,Enabled,Enabled

  2. #12
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Dr. House @ Wiihacks
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    18,744
    Thanks
    1,899
    Thanked 4,397 Times in 3,688 Posts
    Blog Entries
    5
    Everything seems in order; one poster found it had to do with a revision of a loader (USB Loader GX) here; what are you using to load it loader-wise and via IOS 249 or IOS 222?

  3. #13
    Junior Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    CFG-Loader and Neogamma.

    I'll try that GX 825 suggestion.

    I am using IOS 249, that's where i install everything to. The weird thing is that it loads up with the health and safety screen and then just goes black but the controller stays on. With other games that have had the black screen i have found that neither the remote stays on or the health and safety screen loads.

  4. #14
    Junior Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Annoyingly enough the actuals devs have taken rev825 off of their download section (last one is 883). I tried using google and only found a wad file for r825 but not the .dol file

    The download section doesn't list which ones are stable and which ones are BETA's. Do you know which is the latest stable release of USB loader GX off the top of your head?



    This is getting a bit disheartening now. I'm going to try some more isos tomorrow to check whether or not they work (some mid to newer releases because it seems that the older games are causing the trouble).

  5. #15
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Dr. House @ Wiihacks
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    18,744
    Thanks
    1,899
    Thanked 4,397 Times in 3,688 Posts
    Blog Entries
    5
    I've tried multiple wad installs off that site; it shouldn't be a concern for a brick if that's what you mean. A wad is even better --- channel install. Give it a try (though since you're using two other loaders and the issue has presented itself, I dunno). I forget but are you USB HD gaming or disc?

  6. #16
    Junior Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I use USB loading. I'd love to use disc but the laser stopped working regularly a while back and i can't really the disc drive effectively anymore.

    I gave the r825 suggestion a try but it didn't work. I tried a different ISO, this time an NTSC version and that didn't work either. I get the feeling that there is a deep lying problem that isn't obvious from looking at my installed IOS'.

    I might try and virginize my wii at some point in the very near future and follow dogeggs guide again. I know that there are threads laying about regarding how to do it but do you think that it would be something that may alleviate the issues i am facing?

  7. #17
    Junior Member
    Join Date
    Apr 2010
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Somebody please tell me which ISO is definitively required to run a) Mario Party 8 and b) Warioware:Smooth Moves. There'll be a thanks in it for your trouble

    I could scroll through 56 pages to see if anybody has actually said them (and i probably will as much of a chore as that is) but this way it'll be a heck of a lot easier.

  8. #18
    Senior Member Krank's Avatar
    Join Date
    Jan 2010
    Posts
    8,895
    Thanks
    953
    Thanked 4,321 Times in 2,128 Posts
    Blog Entries
    7
    1)Extract the following PC files to your computer:-

    IOS Patcher 1.1 http://www.mediafire.com/download.php?ynwkj2dyqum

    2) Drag your chosen .iso onto the IOS Patcher .exe file and it will open and show you the IOS it uses to run.

    I found this by searching for 10 seconds
    Damn I suck!!!!

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •