Originally Posted by JacquesP
I tried burning to an "Imation" brand DVD+R Double Layer disk and it didn't finalise the disk properly and hence didn't work.
A few things to make sure of are:
You are using "ImgBurn"
You are using Layer Break (set to 2084960, easily done in the "write" settings of ImgBurn)
You are using a Verbatim-brand DVD+R DL disk. These are supposedly the best.
Set write speed to the rated speed of the disk. The Verbatim disks I used were rated at 2.4x speed.
You have the latest firmware for your DVD burner. This can make a big difference.
You have the latest firmware on your Wiikey. 1.9s I believe.
Last edited by Elmaxo; 07-03-2008 at 10:35 AM.
This is so true, I just burned my copy this morning. 1st copy was done using Verbatim DVD-R DL, IMGburn didnt let me set the layerbreak for -R disc. I continued anyway and it loads to the white screen after the loading then freezes.
Originally Posted by Elmaxo
Luckily I had Mitsubishi DVD+R DL (Mitsubishi also manufacture Verbatim DVD-R) which i bought 2 years ago laying around. I burned with IMGburn at max spped of 2.4x and added the layer break 2084960 and leave everything else as default, and BAMM it loads perfectly.
Alot of people have said that you have to use +R disc. In my case its true. I also find that using Verbatims -R for my single layer games works best. I have a few in TDK and they work sometimes and refuse to work other times. Hope this helps.
My Wii: Austalian D2C2 fw 3.2E
Drivechip: D2pro9 fw 1.4
Burner: Pioneer DVR-K17LF 4.53
Still no Luck,have just burnt another SSBB ISO I burned with IMGburn at max speed of 2.4x and added the layer break 2084960 on a Memorex +R DL ,I couldn't upgrade the firmware on my burner for some reason,but I have never had a prob before with all other games ,but I was using Verbatim -R single layer at x1 .
At the moment I cant get hold of any Verbatim DL ,it cost me €29 for 5 of the memorex !! so will shop around for cheaper Verbatims,
Thanks for all the help so far
Wii:Wikey 1.9S update
Having trouble w/ ssbb
Hi all pretty new here. I read the posts here bout the break. Downloaded ImgBurn, put in break, ect. I have a d2c board in wii. I have memorex dvd+R DL ( first dl's Ive owned) Ive burnt single layers no prob. Attempted to burn this game about oh 8 times now. 1st time didnt read posts and burnt with nero and actually the game came up but when I went to play it froze on one of the loading screens . Since, I have not even gotten a screen. Stats on wii, D2C board , D2Pro9 chipped, changed the speed on the burn Anything else Im forgetting? dunno let me know Ill let yas know. This is driving me nutz by now lol. Thanx for all the help guys/gals.
Last edited by AmPau; 07-07-2008 at 03:59 AM.
Reason: remembered info that may help people reply
*UNDERSTAFFED*ONLY MK Contestants & ***** Supporters can PM MODS
Originally Posted by Elmaxo
ampau follow what it says above but burn it at 1x using imgburn and make sure that book type is set to dvd-rom. that what i had to do because i have the same chip and wii as you. You may also need to update the mod chip to 1.4 using the utility disk, but that for people that have d2c2 mod chips. worth a shot. ohh and im using memorex +R dl dvd aswell
hope this attachment helps!
I got SSBB to work on a Verbatim-brand DVD-R DL disk
It requires you to load the game from gecko, i used gecko v1.9.
thanks for the heads up folks.. I also got the DL version. I am seeing that there is a tournament going on here and this is one of the games I have been wanting to play for a while now.. Just hope i get in on time, new so low post count, and get actually good. no reason to join and get my ass kicked in one second.
anyways thanks for the heads up. didnt understand what it meant on the read me to use layer break code etc.. now I understand.. thanks all!
ps. sorry for bring this thread back from dead but I have a feeling that more noobs are going to be looking this up due to the competition.