Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: ImgBurn Problems

  1. #21
    Junior Member
    Join Date
    Jan 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Animal Crossing with Modchip

    I have the Wii since Xmas. It is chipped with "Modchip"

    So, I try with an USB key. I suppose it is just to copy the ISO on the USB.
    Do I need any additional software in the USB key?

  2. #22
    New Member mantis00's Avatar
    Join Date
    Nov 2009
    Posts
    17
    Thanks
    4
    Thanked 47 Times in 3 Posts
    Quote Originally Posted by comecome View Post
    I have the Wii since Xmas. It is chipped with "Modchip"

    So, I try with an USB key. I suppose it is just to copy the ISO on the USB.
    Do I need any additional software in the USB key?

    Ok. Go to the tutorial section and depending on the Wii version you have(3.1 to 4.1 or 4.2) follow the Dogeggs tutorial or the Messie tutorial.

    After that, install NeoGamma or USB Loader GX (preferably) to run your games.
    You'll also need WBFS Manager for your PC to transfer your games to your USB or you can also rip them into the USB if you installed USB Loader GX.

    Read, read and read. Everything is in here in the forum. Any other question keep writing. We'll help you as long as you need it. I can also write in Spanish if easier for you.
    Last edited by mantis00; 01-09-2010 at 05:19 PM. Reason: Correct words

  3. #23
    New Member
    Join Date
    Jan 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks this helped me

  4. #24
    New Member
    Join Date
    Jan 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by mantis00 View Post
    This is a common mistake of everyone who use IMGBURN. You can't just adjust the writing speed to 4x (for Wii Games), but to avoid the auto adjustment of the speed due to the type of DVD disc used for burning, you must set the max speed for the disc and the drive. Here's what to do:

    1. Put your blank DVD-R (it doesn't matter if you use the cheap ones) in the DVD drive. Let IMGBURN read the type of DVD you are using. After it recognize the DVD, click on the green running man at the right of the speed setup.(See attachment 1)

    2. After this you will see a window where you will add the DISC ID by clicking on the green arrow besides the DISC ID max speed. Then set the max spped of the DISC ID to 4x. Do the same with the DEVICE. Specify the device you will use and set the speed to 4x. Click add or update to ensure the info is in top part of the window.
    At the end click OK. (See attachment 2)

    3. You must be now in the main window. Just browse for your iso and start burning. Make sure also the write speed is at 4x. (See attachment 3)


    It works flawlessly. Good Luck.


    __________________________________________________

    If you find this tutorial useful remember to say thanks.
    Still Got Write Speed Miscompare! pls help

  5. #25
    New Member pajoas's Avatar
    Join Date
    Nov 2009
    Location
    PEI, Canada
    Posts
    15
    Thanks
    1
    Thanked 1 Time in 1 Post
    Most newer dvd burners don't burn good at a slow speed. They were designed for fast burning and you will get the best results around 8-12x. Years ago burners maxed out at 8-12x. Now I think one of mine is 24X anyway if you go too slow on your burning your burn quality decreases same as if you max out your burning speed. There's a whole forum out there, instead of talking about Wii's they talk about burners, custom firmware and burn quality.

  6. #26
    Senior Member
    WiiHacks Staff
    Nancy the Moderator

    VWA, Game Master, News Hound
    Only site donators may send a PM to WiiHacks Staff
    Red_Gh0st's Avatar
    Join Date
    Jul 2009
    Location
    Puerto Rico. Sexyness: 2376
    Posts
    6,289
    Thanks
    628
    Thanked 2,144 Times in 1,350 Posts
    Blog Entries
    26
    Don't bring this Thread back from the dead if someone needs help create a new thread

    Thread closed

Page 3 of 3 FirstFirst 123

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •