ghostbusters NTSC blackscreen
I am having a similar issue but I have the following issue I am in the US ntsc
Originally Posted by rooney08
Ok, here is my issue, I have a WII with a hard modification using the wii soliderless clip on chip and had to downgrade to the 3.2U os and all is working great. I have had no problems playing any of my prior burned games execpt now. I have recently downloaded and buned GB using the same process that I have done it the past but now I get this.
The game shows up at the wii menu and when I select the game the screen goes black and the remote turns off and I have to do a hard reset to restart the WII. I have tried to burn the game at a lower speed to see if it helped but I get the same results. After doing this a few time I remember that I got the same results when I burned and tried to play the Donkey Kong game. the game showed up on the wii menu and then I would select it and it would go to a black screen and lock up and turn the remote off. And it would require a hard reboot to get the system to come back.
Can someone help me out and let me know what I need to do please? I have been reading some posts about the game but they all seem to deal with softmods and some neogammer loader or something. I am not that familar on using the neogammer and not sure if I need to since I have a modchip..
Any help would be appreciated...
Thanks in advance,
hi all got it to run Ghostbusters NTSC on a softmodded PAL 3.2e using NeoGamma R3 had to force vidio ntsc 480i and it works great
Still can't get it work..
3.4E PAL Wii
Neogamma R3 and R4
cIOS 249 13 and 13b
Tested all of the above. With 13 I get stuck on the Wiimote screen, with 13b I get a green screen.
Any ideas? :-)
I have just installed the WAD file for Neogamma R3, when I run it as a WAD or from HBC it crashes! What is also weird is that on the Neogamma screen it is saying I am using IOS36 Rev 1042?! Neogamma R4 is working fine and says IOS249 rev13.
This doesn't sound right to me!
FIXED - Deleted neogamma.cfg, reinstalled and resolved.
Last edited by alphawaves; 06-22-2009 at 02:51 PM.
It's a miracle!!! I got it working!
Here is how...
PAL WII 3.4E
cIOS 249 rev13
NeoGamma R3 WAD
Load Ghostbusters with NO settings changed in NeoGamma, as soon as the Backup Launcher starts and before the Wiimote screen... EJECT the disc.. put it back in! EJECT it again straight away and then put it in AGAIN. BINGO! Has worked for me everytime! :-)
I hope this can help others out! Has been a nightmare...
Now on with the gameplay!
yes that will workbut your usbloader or usbloader_gx will not work right? fix it with cIOS55 for usbloader_gx to work.
Hey here we r talking about modchip...for softchip there is a solution but for modchip there's no help!!
you have to use mopchip+software hack to do it work.
u mean gecko os or the method that softchip use....?
i'll b more clear..i am on modchip, firmware 3.2u gecko os 1.07b...i brickblock the game, remove error 002 but still when i load i get green screen..
I'm on chipmod,firmware 4.0U cIOS38_rev13 ,NeoGammaR4RC4 and USB_Loader_GX-ULNR-r516.
I have a Wasabi Dx with update 1.2 on wii system 4.0 no softmods.
at First my Ghostbusters back up would get stuck on the wii remote nunchuck warning screen. I had to unplug my Wii.
Then i decided to try it again. after I pressing start in the disc menu, i pressed the a button repeadedly. the warning screen came for a few seconds only and the game worked!! So it does work on modchips only.