D2pro9 + Wii-Clip Install Video - Page 2 - Wiihacks

GMODZ · 08-28-2008, 08:43 AM

your clip is not sitting properly. apply pressure to the clip and hit the power button on the wii and see if it works.

residentevol · 08-30-2008, 02:48 AM

I tried that still no drive spin up...should I try to desolder c,d,e,and f?

GMODZ · 08-30-2008, 02:14 PM

yeah u can give that a try

Bennyboy123 · 08-31-2008, 09:13 AM

csan someone explain how to bridge clk? My Wiiclip came with 2 blobs of solder either side of the clk, do i just join them to bridge it? or do I bridge it to J? The terms bridge and short confuse me, are they the same?
cheers

GMODZ · 08-31-2008, 10:06 PM

bridge means connect the 2 blobs on the ck point

Bennyboy123 · 08-31-2008, 11:42 PM

ok cheers, did that still didn't work

meseriashu · 10-01-2008, 06:25 AM

Hi there!

I bought a D2PRO9 V3 with v2.1 presoldered on a wii-clip and installed today.

I dont have any backups, so I used the original Wii Sports disc and the chip flashes as in the video, however when the discs spins, there is no light flashing on the chip card.

I can play the Wii Sports, but I dont know if the chip works. I tried to play a DVD disc and it doesnt work. It tells me that the disc cannot be read.

I also put a USB hdd, where I have iso backups. I cannot access the hdd... so is the chip working or not?

It has the jumper bridge soldered.

thanks a lot in advance!

GMODZ · 10-01-2008, 07:12 AM

chip probably works...u cant run games off hdd with the chip on only backups on dvds

meseriashu · 10-01-2008, 07:43 AM

thanks for the quick reply.

I thought that I can play DVD movies on modded Wii. I put a DVD movie disc inside - it says cannot be read.

How can I play backuped iso from hdd? Is there a tutorial I can read how to do it?

Is there other possibility to check the chip? It flashes 2 times by the way. red-blue, red-blue when power on. I have a pal wii.

thanks again for your help!!!

jbloggs · 10-01-2008, 09:32 AM

Yes, you can play DVDs but only after installing the Homebrew channel and then installing the DVDX app.

Guide for Homebrew channel installation
[Only Registered Users Can See Links. Click Here To Register]

Info for installing DVD player app
[Only Registered Users Can See Links. Click Here To Register]