Results 1 to 6 of 6

Thread: D2PRO6 + Wiisilon: I need to reboot the Wii

  1. #1
    Junior Member
    Join Date
    Jan 2009
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    D2PRO6 + Wiisilon: I need to reboot the Wii

    Hello

    Yesterday I installed a D2PRO6 with a wiisilon. The installation is not so bad, because I'm able to read backups. However, I have a problem : each time I eject a DVD, my DVD reader refuses to load another one (the DVD reader does not allow to insert the DVD - the DVD is blocked outside - like the DVD reader is physically blocked in position "eject" and does not come back to its original position). I need to reboot the Wii, then I hear a sound like the DVD reader reinitialising, and I can again insert a DVD. The problem is the same even when I insert only orginal DVDs.

    Someone already encouters this problem?

    Thanks to all
    Daoho

  2. #2
    Wiihacks Recommended
    Pro Installer/Store
    Junior Member
    SolderMaster's Avatar
    Join Date
    Jun 2008
    Location
    Waterford, WI
    Posts
    121
    Thanks
    0
    Thanked 11 Times in 11 Posts
    Please read this thread...

    http://www.wiihacks.com/genuine-wiik...t-issue-2.html

    Try a different ground point. I recommend the C point.

  3. #3
    Junior Member
    Join Date
    Feb 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I Have instaled Wiisilon with wiikey 2 and i had the same probliem yesterday! today i cant read any SK Buckup, i dont now whats habend maybe the chip is not good or the way of Wiisilon is not good way to mod wii?
    plaese any axpirance answer.

  4. #4
    Junior Member
    ~ WiiHacks ★Top Post for Hardware Fix ~
    ***** Contributor
    plexo's Avatar
    Join Date
    Feb 2009
    Location
    UK
    Posts
    69
    Thanks
    1
    Thanked 11 Times in 5 Posts
    try this out alt. g point, works every time.. http://www.wiihacks.com/genuine-wiik...wiikey-v2.html

  5. #5
    Junior Member
    Join Date
    Dec 2008
    Posts
    31
    Thanks
    1
    Thanked 2 Times in 2 Posts
    i had this problem with a D2PRO and wii-clip.

    In my case was a isolation problem! Read: http://www.wiihacks.com/d2pro-line/1...a-problem.html

    And see if the ribbon cable (if you installed) is not passing over any solder point in the board.

    For me now everything works fine!

  6. #6
    New Member
    Join Date
    Jan 2009
    Posts
    57
    Thanks
    2
    Thanked 0 Times in 0 Posts
    daoho, i had the same problem when i opend my wii to check the chipset. i disconnected the ribbon cable & the power cable. put it all back together & the dvd drive kept working for about 20secs, stopped but wouldnt let me insert a game unless restarte dit.
    turns out, i hadnt put the ribbon cable back in nice & tight withthe clamp.
    worth a try to make sure.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •