Results 1 to 6 of 6

Thread: D2pro9 Utility Disc Problem

  1. #1
    Junior Member
    Join Date
    Nov 2008
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    D2pro9 Utility Disc Problem

    I recently soldered a D2pro9 chip in my D2B cut pins wii (Pal), tried some games and most of them work. But when I try and
    load the utility disc it freezes with only showing the sentence "D2pro v1.7 Utility disc" and when I listen to the cd drive, I can hear it stop spinning.

    I tried the v1.7, 1.6 and 1.4 discs and none of them work, they all freeze. I'm using the eur versions, although I tried
    the us region once but had the same effect.

    I have never seen this problem been posted on a forum before, so I might be the only one who has this happening.

    Now, I dont know if every d2pro modchip (mine has a blue sticker) has the newest firmware on it (2.3), but I dont
    have a d2prog, so maybe thats the problem.

    Anyone got tips?

  2. #2
    Wiihacks Recommended
    Pro Installer/Store
    Senior Member
    Spyman's Avatar
    Join Date
    Jun 2008
    Location
    Greater Toronto Area
    Posts
    1,546
    Thanks
    33
    Thanked 123 Times in 106 Posts
    it should work, how are you burning the disc?
    Send me a PM if you need any Canadamods.ca support

    $9.95 Flat Rate Shipping to Canada & USA
    Official Support for Canadamods. I am here to help.

    email: sales@canadamods.ca | website: http://www.canadamods.ca | Phone: +1 416 728 0648

    We are the Official Distributors for: P.3Key, Wode JukeBox, WasabiDX, WiiKey, DriveKey, M3i & More - Always Authentic Guarenteed !
    Buy Wode JukeBox v2.0 here: Here

  3. #3
    Junior Member
    Join Date
    Nov 2008
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I'm buring them on Verbatim -R dvd's (tried a TDK +R too, no luck) with Nero or Imgburn at 4 speed. All other games
    work burning them like this (exept for Mario Kart and SSB, but thats normal )

    I'm pretty sure it's not the modchip,
    the soldering was good, so that can't be the problem...

    I'm currently using the backup loader to play some games (MK, SSB) and tried to run the config disk through that,
    but still no luck, so I'm out of options

  4. #4
    Wiihacks Recommended
    Pro Installer/Store
    Senior Member
    Spyman's Avatar
    Join Date
    Jun 2008
    Location
    Greater Toronto Area
    Posts
    1,546
    Thanks
    33
    Thanked 123 Times in 106 Posts
    mariokart and ssbb work without doing anything special.
    make sure mariokart is your region, and you just burn it like normal nothing special. with ssbb you need to put it on a dual layer dvd+r dl verbatim and set the layerbreak value. With that it will work just fine.
    For the config disc that is all that needs to be done, the older config dics should load up to tell you that its an outdated disc and to get the newest one from d2pro site.

    Do you possibly have access to a different burner ?
    Send me a PM if you need any Canadamods.ca support

    $9.95 Flat Rate Shipping to Canada & USA
    Official Support for Canadamods. I am here to help.

    email: sales@canadamods.ca | website: http://www.canadamods.ca | Phone: +1 416 728 0648

    We are the Official Distributors for: P.3Key, Wode JukeBox, WasabiDX, WiiKey, DriveKey, M3i & More - Always Authentic Guarenteed !
    Buy Wode JukeBox v2.0 here: Here

  5. #5
    Junior Member
    Join Date
    Nov 2008
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I dont think the burning is the problem, but I will try a diffferent burner (with burner you mean a program right? not a different dvd burner (hardware), to see if that works.

    And I already burned SSB on a dual layer with the layerbreak, but it says 'an error has occured,
    please eject bla bla' so I'm using the loader. Mario Kart does the same thing, whatever I do (I used 3 different brand's,
    got me 5 copies of MK now, 2 PAL and 3 NTSC, updated wii with PAL region) but I don't mind,
    I got the best of both worlds (Chip and loader) so thats all good.

  6. #6
    Wiihacks Recommended
    Pro Installer/Store
    Senior Member
    Spyman's Avatar
    Join Date
    Jun 2008
    Location
    Greater Toronto Area
    Posts
    1,546
    Thanks
    33
    Thanked 123 Times in 106 Posts
    hi by burner I mean the hardware. for burning software imgburn.com works the best usually.

    If you do have 2.3/1.6 firmware the chip should function with mk and ssbb just fine though, ssbb can be a tricky one to get working sometimes though, but mk shouldnt have any issue at all.

    Let me know what happens with a different burner. recommended one to try to find is pioneer 111. Hopefully a friend or relative has one you can try with.
    Send me a PM if you need any Canadamods.ca support

    $9.95 Flat Rate Shipping to Canada & USA
    Official Support for Canadamods. I am here to help.

    email: sales@canadamods.ca | website: http://www.canadamods.ca | Phone: +1 416 728 0648

    We are the Official Distributors for: P.3Key, Wode JukeBox, WasabiDX, WiiKey, DriveKey, M3i & More - Always Authentic Guarenteed !
    Buy Wode JukeBox v2.0 here: Here

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •