Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: D2Pro and 4.2U - Only NTSC not PAL - Help!

  1. #1
    New Member
    Join Date
    Nov 2009
    Posts
    6
    Thanks
    0
    Thanked 1 Time in 1 Post

    Angry D2Pro and 4.2U - Only NTSC not PAL - Help!

    I have a Wii NTSC with D2Pro9 f/w 2.3 util disk 1.7. This is the only mod is the chip. Console it at 4.2u. Just before updating to 4.2u / System update 41212 I was able to play PAL backups without issue on 4.1U
    .
    Now when I insert a PAL disk it spins for a few seconds and stops. There is no icon change on the Wii menu. If I use a USA NTSC it works fine.

    If I use the Gecko loader I am able to swap disks and it works fine.
    I am guessing that this is due to 4.2u blocking other regions. I looked at the D2pro9 config and region patcher is enabled.

    1) Is this is problem with the D2Pro9?
    2) How can I play PAL backups again
    3) How can I downgrade from 4.2u to 4.1U? I cant find step by step on this as I am new to this I need this help. Can someone please walk me through to getting back to 4.1U if the D2pro chip cant be fixed.

    Thanks again!!!

  2. #2
    New Member knh564's Avatar
    Join Date
    Nov 2009
    Posts
    19
    Thanks
    4
    Thanked 2 Times in 2 Posts
    I am in the same boat as you, check out the link below it has a lot of info. I am pretty new at this too but from what I've gathered;

    1) No
    2) Various options through homebrew
    3) Can't do it yet.. hopefully d2pro will sort out a firmware update, I've been considerng WODE as a good alternative as I don't like the potential risks with soft-modding.
    g/l

    http://www.wiihacks.com/recommended-...tem-menus.html H

  3. #3
    New Member
    Join Date
    Nov 2009
    Posts
    6
    Thanks
    0
    Thanked 1 Time in 1 Post
    Yes!

    I found a way! It is listed here too. You need to install the 4.2U hack then when done you can downgrade to 4.1U. Here is the steps and info that I used on another forum.

    Do the modify 4.2 then the 4.2 to 4.1 and it works.

    I do hope that the chip makers come out with a firmware fix for 4.2.

    Remember, xzxero is your friend all day everyday.
    Also, the original guide is always at
    Modify any Wii 4.2 & below - GBAtemp.net
    Anywhere else is a thief!

    Update to 4.2
    NTSC-J MEGAUPLOAD - The leading online storage and file delivery service
    NTSC MEGAUPLOAD - The leading online storage and file delivery service
    PAL MEGAUPLOAD - The leading online storage and file delivery service

    Modify 4.2
    MEGAUPLOAD - The leading online storage and file delivery service

    4.2 to 4.1
    NTSC-J MEGAUPLOAD - The leading online storage and file delivery service
    NTSC MEGAUPLOAD - The leading online storage and file delivery service
    PAL MEGAUPLOAD - The leading online storage and file delivery service
    Last edited by ModderMan; 11-29-2009 at 02:00 PM.

  4. 1 User Says Thank You j_internet For This Useful Post


  5. #4
    New Member knh564's Avatar
    Join Date
    Nov 2009
    Posts
    19
    Thanks
    4
    Thanked 2 Times in 2 Posts
    let me know how it works for you...im a little paranoid about softmods lol..i'll have to live with ntsc for now

  6. #5
    Junior Member
    Join Date
    Nov 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    It works!

    Thanks J_internet, i have tested it and it WORKS! I Have Downgraded my 4.2E Wii back to 4.1E and now i am able to Play other Region games again(with the help of the D2Pro of course)

  7. #6
    Junior Member
    Join Date
    Dec 2009
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Ca It works

    THANKS J_internet without ur mentioning of D2pro I would not have done this hack! And of course thank you, xzxero!

    I tested this myself! It worked on my NTSC USA/CANADA modded with D2pro (9wire) ... I'm back to 4.1 and enjoying my PAL and NTSC-J games

    For noobs: If you already have 4.2 no need to download the first set of links that are posted above in J-internet's post! For instructions google "Modify any Wii 4.2 & below" and follow only the "Modify 4.2" and "4.2 to 4.1" to downgrade!

  8. #7
    Junior Member
    Join Date
    Dec 2009
    Posts
    2
    Thanks
    3
    Thanked 0 Times in 0 Posts
    I'll be trying this out shortly and let you know how it goes. I'm guessing I'll need the HBC to get this to work

  9. #8
    Junior Member
    Join Date
    Feb 2008
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    i have screwed the pooch

    ok i updated my wii with a d2pro to 4.2u which erased my homebrew and now some of my games will not load (although its not just pal games, as i converted all of my games to ntsc)

    i followed the instructions and got homebrew working again

    http://www.wiihacks.com/recommended-...tem-menus.html

    i followed and completed all steps to part d with no problem.

    still those disks do not autoload as they used to.

    i am thinking that by downgrading back to 4.1u i should get back to where i was. as i am not an expert in these areas, i dont want to brick my wii. so should i do this and if so can someone point me to some easy directions?

    my d2pro chip is one of the first production runs, and they never gave me a cable to update the firmware, so i am still running the original firmware if that matters?

    thanks for the help

  10. #9
    New Member
    Join Date
    Oct 2009
    Posts
    5
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Us D2Pro9

    Upgrade FPGA - Need Cable installed with mini USB connecter.

    Upgrade SPI - Burn ISO to disk & run it.

    Uexboxmods dot com put the chip & usb updater in the Wii we got for my son. Been working great for over 2 years or so now. Just did both upgrades that were available on the D2PRO web site. Nothing really new there though. The upgrades were pretty old. Only this past two months have run into problems running a couple of backups of my son's Wii Games.

  11. #10
    Junior Member
    Join Date
    Feb 2008
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    what is fpga and spi? i am assuming you mean the firmware on the d2pro? i have ordered the usb programmer and cables, hopefully will get next week. Are people using the d2pro with 4.2 and getting all their old games to work, are some of mine not working b/c my firmware on the d2pro is not up to date?
    any help would be great, since i have 4.2 working for most disks i would rather not downgrade to 4.1 if all i need to do is upgrade my d2pro.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •