DIOS MIOS v2.0

Published on 06-25-2012 01:46 PM

2 Comments

DIOS MIOS v2.0 has been released by Crediar. DIOS MIOS allows you to run Gamecube games from an USB device on your Wii. This new versions allows the loading of GC games through USB. Not to be confused with DIOS MIOS Lite (DML).

Features:
Load Gamecube ISOs from USB device
Load extracted Gamecube ISOs from USB device
Load Gamecube Discs
Emulate Memorycard (NoMoreMemory)
Cheat codes
USBGecko debugging
Changeable configuration of various settings
Reset/Power off via GC controller key combo
Real-NAND and emu-NAND support

Download DIOS MIOS v2.0
Frequently Asked Questions

Official Project Page

_{This article was originally published in forum thread:

DIOS MIOS v2.0
started by
Red_Gh0st} _{View original post}

2361 Comments

e2zippo - 08-02-2012, 09:36 AM
- Reply
I've been settings this up now and it works sometimes!

Most of the times i get stuck on the DIOS MIOS GC screen with having to reboot the Wii.

Info:
DM Version: 2.2
USB Loader: CFG r37 beta10 & USB Loader GX r1200

I tried both with compressed and uncompressed games, and it seems to be random, 8/10 times I get stuck on the DIOS MIOS screen.

I tried reinstalling MD 2.2 but that didn't do anything.

Anyone know what's up?

Cheers for the guide!

SNES_Master - 08-02-2012, 10:03 AM
- Reply
Originally Posted by e2zippo

I've been settings this up now and it works sometimes!

Most of the times i get stuck on the DIOS MIOS GC screen with having to reboot the Wii.

Info:
DM Version: 2.2
USB Loader: CFG r37 beta10 & USB Loader GX r1200

I tried both with compressed and uncompressed games, and it seems to be random, 8/10 times I get stuck on the DIOS MIOS screen.

I tried reinstalling MD 2.2 but that didn't do anything.

Anyone know what's up?

Cheers for the guide!

Are you using the forwarder or loading through HBC?

Originally Posted by Asdd2

Hi All!
what we do:
1; Installed DIOS-MIOS v2.2, hair was gone for good
2; Installed DARKCORP v1.1.
3; Load GC game with Dios-Mios Booter. Wii writes: Fatal Eror Aploader Size Zero
4; Uninstall DARKCORP v1.1
5; Reinstall DIOS-MIOS v2.2
6; Load GC game with Dios-Mios Booter. Wii writes: Fatal Error Aploader Size Zero
7; Reinstall softmod: http://www.wiihacks.com/recommended-...d-any-wii.html
8; Install DMLr1.5.wad load GC GAME with CFG loader mod. The game loads perfectly
9; Install DIOS-MIOS v2.0
10; Load GC game with Dios-Mios Booter. Wii writes: Fatal Error Aploader Size Zero

How do I'll get you working again?

Try USB Loader GX 3.0 r1200 and DIOS MIOS 2.2, make sure you've updated your forwarder channel to v5.1 or that you launch the USB Loader through HBC. Also make sure your HDD and loader settings are as the 1st page suggests.

Sent from my iPhone using WiiHacks

e2zippo - 08-02-2012, 10:40 AM
- Reply
Originally Posted by SNES_Master

Are you using the forwarder or loading through HBC?

I'm using a forwarder, USB Loader GX-UNEO_Forwarder_5_1_AHBPROT.wad to be exact, i tried the other one as well (USBLoader_GX_V3_0_UNLR_Channel_AHBPROT.wad) but I only got a promt to copy to SD with that one.

But it seems to be the same when using CFG as well, could that have something to do with the forwarder as well?

SNES_Master - 08-02-2012, 10:51 AM
- Reply
Originally Posted by e2zippo

I'm using a forwarder, USB Loader GX-UNEO_Forwarder_5_1_AHBPROT.wad to be exact, i tried the other one as well (USBLoader_GX_V3_0_UNLR_Channel_AHBPROT.wad) but I only got a promt to copy to SD with that one.

But it seems to be the same when using CFG as well, could that have something to do with the forwarder as well?

Are your games in the correct directory?

USB1:/Games/GameID/game.iso

Sent from my iPhone using WiiHacks

e2zippo - 08-02-2012, 10:58 AM
- Reply
Originally Posted by SNES_Master

Are your games in the correct directory?

USB1:/Games/GameID/game.iso

Sent from my iPhone using WiiHacks

Yeah, they are, I used create_wad.bat.

USB1:\games\G2VE08\game.iso (Viewtiful Joe 2)

USB1:\games\G2VE08\sys\apploader.img
USB1:\games\G2VE08\sys\bi2.bin
USB1:\games\G2VE08\sys\boot.bin

SNES_Master - 08-02-2012, 11:05 AM
- Reply
Originally Posted by e2zippo

Yeah, they are, I used create_wad.bat.

USB1:\games\G2VE08\game.iso (Viewtiful Joe 2)

USB1:\games\G2VE08\sys\apploader.img
USB1:\games\G2VE08\sys\bi2.bin
USB1:\games\G2VE08\sys\boot.bin

Hmm...which Loader are you using? Try USB Loader GX 3.0 r1200 and DIOS MIOS 2.2 if you're not already using them.

Sent from my iPhone using WiiHacks

e2zippo - 08-02-2012, 11:16 AM
- Reply
Like i stated in my first post.

Info:
DM Version: 2.2
USB Loader: CFG r37 beta10 & USB Loader GX r1200

SNES_Master - 08-02-2012, 11:25 AM
- Reply
Originally Posted by e2zippo

Like i stated in my first post.

Info:
DM Version: 2.2
USB Loader: CFG r37 beta10 & USB Loader GX r1200

Which IOS did you use to install DIOS MIOS?

To fix the "copy to SD" message be sure to had the following settings:

GameCube Mode: MIOS (Default & Customs)
DML Installed Version: v2.2+
DML No Disc: Off
DML No Disc+: Off

See if that helps
Sent from my iPhone using WiiHacks

e2zippo - 08-02-2012, 11:43 AM
- Reply
Originally Posted by SNES_Master

Which IOS did you use to install DIOS MIOS?

To fix the "copy to SD" message be sure to had the following settings:

GameCube Mode: MIOS (Default & Customs)
DML Installed Version: v2.2+
DML No Disc: Off
DML No Disc+: Off

See if that helps
Sent from my iPhone using WiiHacks

All settings are as you described.
The "copy to sd" I got rid of by using r1200 and deleting the config-file, and using the 5.1 forwarder.

To install DIOS MIOS i used IOS 249 (r21007)

SNES_Master - 08-02-2012, 11:59 AM
- Reply
Originally Posted by e2zippo

All settings are as you described.
The "copy to sd" I got rid of by using r1200 and deleting the config-file, and using the 5.1 forwarder.

To install DIOS MIOS i used IOS 249 (r21007)

Ok, you could try installing DM with IOS236, it's possible 249 didn't install it correctly

Sent from my iPhone using WiiHacks

e2zippo - 08-02-2012, 12:24 PM
- Reply
I reinstalled with IOS 236, and re-downloaded DIOS MIOS 2.2 and verified sha1 checksum to be sure, no luck.

And appearently I haven't been using r1200 of USB Loader GX, it's still r1180, which comes with the 3.0 update.

I found a link a couple of pages back that says r1200 but it isn't.

I tried locating it but I can't find it?

SNES_Master - 08-02-2012, 12:37 PM
- Reply
Originally Posted by e2zippo

I reinstalled with IOS 236, and re-downloaded DIOS MIOS 2.2 and verified sha1 checksum to be sure, no luck.

And appearently I haven't been using r1200 of USB Loader GX, it's still r1180, which comes with the 3.0 update.

I found a link a couple of pages back that says r1200 but it isn't.

I tried locating it but I can't find it?

Go to USB Loader GUIs google code page and click the issues section, it's in there.

Sent from my iPhone using WiiHacks

e2zippo - 08-02-2012, 01:37 PM
- Reply
Originally Posted by SNES_Master

Go to USB Loader GUIs google code page and click the issues section, it's in there.

Sent from my iPhone using WiiHacks

Ok, here's the deal

I was running r1200 (homebrew channel reported the wrong version, same with CFG)

And it all works if I launch either CFG or Usb Loader GX via HBC, but not if I launch them via forwarders.

What would be a correct way of installing forwarders for CFG r37 and USB Loader GX r1200?

And a couple of other questions as well.

* How do I exit a Gamecube game back to USB Loader GX?
* Is there any way to turn off that the Wii searches for a disc every time i boot a GC game?
* How do I boot directly into USB Loader GX, bypassing Wii's main menu?

I realize these questions might belong in another thread, sorry about that.

THanks SNES_Master for your help!

Klavice - 08-02-2012, 02:21 PM
- Reply
I managed to get it working with Dios Mios version 2.0 and Cfg USB Loader but now it randomly started flickering and I can see the game but it won't stop flickering making it impossible to play.

These games have worked in the past so I'm not sure what's wrong.

SNES_Master - 08-02-2012, 02:55 PM
- Reply
Originally Posted by e2zippo

Ok, here's the deal

I was running r1200 (homebrew channel reported the wrong version, same with CFG)

And it all works if I launch either CFG or Usb Loader GX via HBC, but not if I launch them via forwarders.

What would be a correct way of installing forwarders for CFG r37 and USB Loader GX r1200?

And a couple of other questions as well.

* How do I exit a Gamecube game back to USB Loader GX?
* Is there any way to turn off that the Wii searches for a disc every time i boot a GC game?
* How do I boot directly into USB Loader GX, bypassing Wii's main menu?

I realize these questions might belong in another thread, sorry about that.

THanks SNES_Master for your help!

If it works via HBC but not the forwarder your forwarder is outdated. The reason it reports the wrong version on HBC is that when you DL the beta (which everything above r1180 is right now) it doesn't update the meta.xml file.

1) I don't think you can, check the short cuts on page one, you can reboot or shut down.

2) Not that I know of, when you click start you'll always here the disc drive spin. I believe this is cause DM tricks the system to think its reading from the drive but is really reading off USB

3) You can have Priiloader do that, I'm not able to use my Wii at the moment to tell you exactly which setting but you can make it auto load to different things like HBC, WiiMC, USB Loader etc etc.

Grab the forwarder here: http://code.google.com/p/usbloader-g...T.wad&can=3&q=

Sent from my iPhone using WiiHacks

candylove - 08-02-2012, 06:52 PM
- Reply
cfg70_r37_beta10 works perfect with DIOS MIOS 2.2

://code.google.com/p/cfg-loader-mod/issues/detail?id=48

Forwarder - GAF's Wii Homebrew Tutorial

e2zippo - 08-03-2012, 12:55 AM
- Reply
Originally Posted by candylove

cfg70_r37_beta10 works perfect with DIOS MIOS 2.2

://code.google.com/p/cfg-loader-mod/issues/detail?id=48

Forwarder - GAF's Wii Homebrew Tutorial

Which forwarder are you using to launch CFG?

And what about compressed vs uncompressed, what is recommended?
And what about nodisc support, is it better to just leave an original GC/Wii disc in the drive all the time, or is it not needed anymore?

Cheers!

crimsonnight - 08-03-2012, 03:46 AM
- Reply
Sorry I'm guessing this is the wrong thread for this question, but is there a way to get games from other systems (N64/SNES etc) to be displayed in the same way that Wii/GC games are in USB Loader GX?

SNES_Master - 08-03-2012, 03:53 AM
- Reply
Originally Posted by crimsonnight

Sorry I'm guessing this is the wrong thread for this question, but is there a way to get games from other systems (N64/SNES etc) to be displayed in the same way that Wii/GC games are in USB Loader GX?

It is the wrong place, but no. No way to get NES, SNES, N64 etc etc to display box art and game details....not as far as I know anyway.

Sent from my iPhone using WiiHacks