• DIOS MIOS v2.0


    DIOS MIOS v2.0 has been released by Crediar. DIOS MIOS allows you to run Gamecube games from an USB device on your Wii. This new versions allows the loading of GC games through USB. Not to be confused with DIOS MIOS Lite (DML).

    Features:
    Load Gamecube ISOs from USB device
    Load extracted Gamecube ISOs from USB device
    Load Gamecube Discs
    Emulate Memorycard (NoMoreMemory)
    Cheat codes
    USBGecko debugging
    Changeable configuration of various settings
    Reset/Power off via GC controller key combo
    Real-NAND and emu-NAND support


    Download DIOS MIOS v2.0
    Frequently Asked Questions

    Official Project Page

    This article was originally published in forum thread: DIOS MIOS v2.0 started by Red_Gh0st View original post
    Comments 2280 Comments
    1. SNES_Master's Avatar
      SNES_Master -
      Quote Originally Posted by deucide View Post
      I just downloaded usb gx rev 1198 and it seems to be working great. even let me boot a retail disc from within usb gx.
      Good to know, having the option of running retail games is a must IMO.

      Sent from my iPhone using WiiHacks
    1. PhineasT's Avatar
      PhineasT -
      Ok, I got it to work. Installed USB Loader GX r1198 and DM 2.2 Update 2 and it now boots properly. Only problem I see is that the R+Z+Start key combination doesn't work anymore for me. Can anyone verify this?
    1. Jax's Avatar
      Jax -
      Quote Originally Posted by PhineasT View Post
      Ok, I got it to work. Installed USB Loader GX r1198 and DM 2.2 Update 2 and it now boots properly. Only problem I see is that the R+Z+Start key combination doesn't work anymore for me. Can anyone verify this?
      Yes, I had this same problem with that set up.
      For some reason it no longer lets you exit through the GC controller, That's why I reverted back.
    1. PhineasT's Avatar
      PhineasT -
      Correction to the previous post about Wiiflow r605. Wiiflow r607 is available and works with DM 2.2.

      Here: http://www.mediafire.com/?b67rc8c97w1s8j6

      jax... the R+Z+Start key combination WORKS in Wiiflow so it's a USB Loader GX issue.

      UPDATE: In USB Loader GX enable DML PAD Hook ON and that gets the key combination back.
    1. outtatown's Avatar
      outtatown -
      Quote Originally Posted by PhineasT View Post
      Correction to the previous post about Wiiflow r605. Wiiflow r607 is available and works with DM 2.2.

      Here: Wiiflow_Mod_svn_r607.zip

      jax... the R+Z+Start key combination WORKS in Wiiflow so it's a USB Loader GX issue.

      UPDATE: In USB Loader GX enable DML PAD Hook ON and that gets the key combination back.
      Yes, exactly. It was never gone in GX just turned off via a loader setting. You just have to enable it if you want it. Supposedly it was defaulted to off because it interfered with some games but I don't know which ones.
      And I'm on 2.2 (the latest 7.20.2012 update) with GX r1198. Most things are going well it seems like. Haven't tested retail disc loading recently but I think it's back working again on the latest update... (edit) Went and tested a retail - nope, not working.
      And FYI, the Japanese game support doesn't quite have the kinks worked out. If you want to play a JP game and it's not loading right, use dios mios booter and enable ntsc-j patch on and it'll be fine.

      Quote Originally Posted by thevoiceover View Post
      Now back to the program at hand - Does anyone have any update on if DM 2.2 is playing retail fine from Disc Channel? I can't get it running at all and still have a few games that neither of the loaders seem to run (XMEN 2 and GUN!)
      DiosMiosLite ran Xmen2... Though not USB, SD. GUN? I don't think any run that right now.
    1. ki69's Avatar
      ki69 -
      Quote Originally Posted by PhineasT View Post
      Ok, am I the only one experiencing this? With DM 2.2 with a disc in the drive no matter what tool I use to select an ISO it boots the disc in the drive. If I don't put a disc in the drive when I boot the ISO I get a zero byte apploader error.
      I got the same problem.
    1. SNES_Master's Avatar
      SNES_Master -
      Quote Originally Posted by ki69 View Post

      I got the same problem.
      Make sure you use the latest USB Loader GX, r1198 works with DM 2.2 I hear.

      Sent from my iPhone using WiiHacks
    1. PhineasT's Avatar
      PhineasT -
      ki69... per SNES_Master, r1198 and DM 2.2. Go into settings in USB Loader GX and set DM to DM2.2+. This got it working for me. Also runs original gamecube games from Disc Channel and USB Loader GX.
    1. viral89's Avatar
      viral89 -
      I'm sure this is an ultimate newb questions but how do I enable saving? I got super smash bros melee running but it says there is no memory card detected. Do I need an actual gamecube memory card or is there a way to save via USB or SD?
    1. SNES_Master's Avatar
      SNES_Master -
      Quote Originally Posted by viral89
      I'm sure this is an ultimate newb questions but how do I enable saving? I got super smash bros melee running but it says there is no memory card detected. Do I need an actual gamecube memory card or is there a way to save via USB or SD?
      Click the game, the instead of start click "Settings" look towards the bottom and enable "NMM" it will emulate a GC memory card using your SD card.

      Sent from my iPhone using WiiHacks
    1. cwjakesteel's Avatar
      cwjakesteel -
      Quote Originally Posted by SNES_Master View Post
      Click the game, the instead of start click "Settings" look towards the bottom and enable "NMM" it will emulate a GC memory card using your SD card.
      Also, don't put in a GC memcard and use NMM at the same time...
    1. SNES_Master's Avatar
      SNES_Master -
      Quote Originally Posted by cwjakesteel

      Also, don't put in a GC memcard and use NMM at the same time...
      That might cause some trouble lol.

      Sent from my iPhone using WiiHacks
    1. dadi40's Avatar
      dadi40 -
      Anybody have Luigi's mansion working with 2.2? I tried multiple times with widescreen on or off, still freezes at the nintendo logo. *sigh* Went back to R5.
    1. HulkWogan's Avatar
      HulkWogan -
      Luigi's mansion works perfect for me on 2.2, working with latest wiiflow and latest Usb loader gx with a memory card in, in fact all games I have tried are fine.

      Every time I backup resident evil zero I recieve a read error although the disc looks immaculate and plays fine from disc, anybody have this ripped? I shall try clean rip later.

      How would I go about copying resident evil disc 2 when the loader identifies it as the same game i.d. as disc 1 and therefore tells my I already have it?
    1. dadi40's Avatar
      dadi40 -
      Luigis Mansion is a no go for me. Screen hangs at the nintendo logo and it takes like 5 seconds for the voice to say nintendo....then hangs. Tried reinstalling 2.2, usbloaderGX r1198, and the latest dios mios booter. Figures, the only game my gf really cared about and it's not working. Only other revision I have is 2.0 r5 so, I guess I'll re-install that and wait for the next one.
    1. crimsonnight's Avatar
      crimsonnight -
      I'm still not getting past the black screen

      Also since flashing 2.2 I seem unable to connect more than one wiimote in any game?
      *EDIT* actually it seems to only be some games, eg donkey kong country returns seems to kill off support for any other wiimote, even after exiting the game...

      Any ideas guys?

      *EDIT 2* I really don't get why I'm just getting a black screen:
      I have all the right IOS Files Installed: http://syscheck.softwii.de/Dl6Kcpmz
      I have Dios Mios 2.2 installed
      I have the latest (modded) USB Loader GX/Wiiflow installed (grabbed from this thread)
      I have ripped my GC games from within USB Loader GX directly to my hard drive
      I formatted my hard drive to exactly how this guide said it should be (but have also tested 3 other hard drives)
      And finally I get the exact same result from Devolution

      There must be something I'm missing, does anyone have any ideas?

      *EDIT 3* Devolution works after it checks the disc for the first time!! This is a massive breakthrough ^_^ But it also makes me more confused as to why USB Loader GX isn't working correctly... Also is there a way to disable the devolution check? I have a lot of games so it could be a bit of a nightmare T_T Also some of my rips have been compressed - will they definitely not work with Devolution? Cheers
    1. thevoiceover's Avatar
      thevoiceover -
      @crimsonnight - your IOS 236 - 251 are pretty outdated, I would at least be running v8 on the avail ones and v9(beta) on the rest.. I'm running these w/o any current errors I'm aware of.. i'm pretty sure Devolution doesn't currently use these, probably why you aren't seeing issues there. I also am not aware of a check to disable AR in Devolution.
    1. SNES_Master's Avatar
      SNES_Master -
      Quote Originally Posted by thevoiceover
      @crimsonnight - your IOS 236 - 251 are pretty outdated, I would at least be running v8 on the avail ones and v9(beta) on the rest.. I'm running these w/o any current errors I'm aware of.. i'm pretty sure Devolution doesn't currently use these, probably why you aren't seeing issues there. I also am not aware of a check to disable AR in Devolution.
      Devolution disc check CAN'T be shut off, doing so could potentially lead to piracy and the developer wanted to make sure such a thing was impossible using his program.

      You only need to check the disc once anyway, after it's authenticated once you never need to do it again (unless perhaps you delete the game and re-rip it for some reason)

      Sent from my iPhone using WiiHacks
    1. crimsonnight's Avatar
      crimsonnight -
      Quote Originally Posted by thevoiceover View Post
      @crimsonnight - your IOS 236 - 251 are pretty outdated, I would at least be running v8 on the avail ones and v9(beta) on the rest.. I'm running these w/o any current errors I'm aware of.. i'm pretty sure Devolution doesn't currently use these, probably why you aren't seeing issues there. I also am not aware of a check to disable AR in Devolution.
      Cheers, I'll give that a shot!
      Do you have links to the updated IOS' or is there a program I can download to automatically update them all? Thank you
    1. SNES_Master's Avatar
      SNES_Master -
      Check the "Softmod ANY Wii" guide. Look for the IOS Update 6 pack, that should give you what you need

      Sent from my iPhone using WiiHacks
  • Recent Threads

    LouieBlu

    Need help with My USB drive

    Thread Starter: LouieBlu

    Ok so I bought A 320 gb USB Harddrive I checked the list and it is compatible its an WD Elements Drive, I followed the guide on how to format and set

    Last Post By: LouieBlu Today, 09:30 AM Go to last post
    concar

    Problem with wiiflow 4.1

    Thread Starter: concar

    Hi,
    l updated my softmod last night with the latest softmod any wii.
    followed guide through with no problems, done ios update,app pack.

    Last Post By: nightstah Today, 09:30 AM Go to last post
    ste2425

    Hi all :)

    Thread Starter: ste2425

    Recently bought myself a white Wii used for £30 with controllers and games, right pleased with my self

    I knew about soft-modding as I

    Last Post By: ste2425 Today, 02:50 AM Go to last post
    jameslieb1

    Control latency for some N64 VC games

    Thread Starter: jameslieb1

    I have noticed that for some N64 Virtual Console games on my Wii, the controller input seems to have a delay of about a third or a fourth of a second.

    Last Post By: jameslieb1 Today, 02:40 AM Go to last post
    mykeee

    Wii Fit Plus data transfer from console memory to HDD game?

    Thread Starter: mykeee

    I recently had the dvd motor stop working on my Wii. By that I mean that the DVD does not spin when inserted into the Wii. So I am not able to play any

    Last Post By: beerfield Today, 12:14 AM Go to last post
    e244dj@yahoo.com

    FCE Ultra GX is SLOW

    Thread Starter: e244dj@yahoo.com

    I've installed Homebrew and FCE Ultra GX onto my Wii. And all seems to work fine, only the response time from the WiiMote & Game Cube controller is

    Last Post By: e244dj@yahoo.com Yesterday, 03:15 PM Go to last post