[Guide] Legend Of Zelda Skyward Sword

I thought that was the whole point of this thread? Theres loads of posts about it in the thread unless I got the wrong end of the stick?

Originally Posted by Amylittlehands

I thought that was the whole point of this thread? Theres loads of posts about it in the thread unless I got the wrong end of the stick?

This thread is to help users get the game running, but not to help pirates. I am not sure how that translates into you getting the wrong end of anything. You agreed to the site rules.

Originally Posted by skellinator

Then you should not have the game. You can click HERE for an explanation of your situation.

Do not ask about this until you own the game.

Off-Topic but...
*Shadow listens to that awesome tune for 5 minutes straight for the third time* :P

Maybe this will help some of you out here, hopefully.

I had done my Wii with the twilight hack, a a while back and I was on 4.2u. I played Zelda skyword sword about 10 hours in multiple sessions. I decided to upgrade to 4.3u and redo my Wii and use Pimp my wii. After I did this, my Zelda would not run. I had all the good cIOS but it just didn't want to work. I saw the remote image that every game had, but it never recognize the wii remote then the screen would just blank out.

I brought the game to my friend who has his Wii the same way I did. It worked on his. I tried my Wii on his HDD and the game worked.

I decided to do a last test, I just put the game on a usb key and try loading it that way, and it worked.

My conclusion is that my hard disk drive takes too long to load games when selected and for some reason, Zelda Skyword game doesn't want to load, but all the other games I tested still did work.

My HDD is usb powered and is a 5400 rpm. My friend HDD is a 7200 rpm and needs to be powered with an outlet and this one works.

Hopefully this will solve some problems some of you guys have. I run my with iso 250, having iso 249 and iso 250 d2x as this guide mention.

Originally Posted by ShadowSonic2

Off-Topic but...
*Shadow listens to that awesome tune for 5 minutes straight for the third time* :P

You were not the only one

Ok so I just got my game and installed using the Wii itself but game won't play at all. It kicks me back to the Wii Menu when I try to load it!! Please help!!! I tried running on 222, 223, 249, 250. I had a virgin Wii that I updated using the latest softmod ANY wii guide. Only thing I can think of is that I am using cUSBLoader v61. How do I update to v70 to try out the game again? I know it's not anything to do with my game and most of all the newer games work with the softmod ANY wii guide. Thanks.

Originally Posted by JusPlaying

Ok so I just got my game and installed using the Wii itself but game won't play at all. It kicks me back to the Wii Menu when I try to load it!! Please help!!! I tried running on 222, 223, 249, 250. I had a virgin Wii that I updated using the latest softmod ANY wii guide. Only thing I can think of is that I am using cUSBLoader v61. How do I update to v70 to try out the game again? I know it's not anything to do with my game and most of all the newer games work with the softmod ANY wii guide. Thanks.

Just use search on the forum or google for the newest version.
Then just copy it over to your SD, so on. Pretty sure there is an guide here somewhere on it.

first of hows everyone one doing. Me im swell... anyway im just a bit outa the loop on the wii modding game last time i did any work to my wii was back on version 3.2u and im still on that version im been all pumped for this zelda game ( i used the twlight hack to softmod) well i modded for the reason of roms and just fun homebrew apps.untill the new zelda game all other games ive bought have worked with no problem... but as most of you all are aware thats not the case with the new zelda game. im gone threw the threads done the cios 249 ect.. and still can not play the game from the real disc.( this is also my FIRST wii motion+ game) if that has something to do with it im running homebrew and gamma 52 and i jsut get kicked back to the wii menu every time i try to launch the game yes its been asked many times but can someone atleast steer me in the right path? like i said my wii is 3.2u and i used the twlight hack and this is my first wii motion+ game many thanks


ps id rather not have to play my games off and external hdd i dont have one atm but in the future or xmass i will go that path

I finally got the game to work, not one black screen so far. I Changed from my USB drive to a 16GB SD Card. Thanks for the help you guys.

Originally Posted by digital.mind

I finally got the game to work, not one black screen so far. I Changed from my USB drive to a 16GB SD Card. Thanks for the help you guys.

Niiiiiiiice a 16GB SD card, me wants that !!!

Originally Posted by nathanas

I have been absent from my wii for quite some time but with SS out I am keen to get back on her. I looked
on gba for updates and did all that. I loaded up the game and it went to the motion plus tutorial. I know you are
unable to play the game without it so I turned it off as soon as I saw this screen. I just wanted to see that I had
successfully loaded the game. I thought I would exit out and try once more. Now all I get is a black screen, no
"thank you for your purchase/motion plus tutorial" I'm hoping it wont load due to me not having the motion plus
peripheral? I am getting one today but I'm just wondering if anyone can verify that this is what my issue might be?
Thanks, any help would be greatly appreciated.

You gotta have the motion plus wiimote, no doubt about it!

Wait you can load games through SD Cards?

So yeah, weird problem. Burned the ISO to the DVD-R the right way, yes i own the game.
Basically my fan won't work. only when i boot the console so if i'm halfway through SS the console overheats.

any opinions?

Originally Posted by spacheco1

So yeah, weird problem. Burned the ISO to the DVD-R the right way, yes i own the game.
Basically my fan won't work. only when i boot the console so if i'm halfway through SS the console overheats.

any opinions?

Well i doubt there is a issue with the software, you could try to vacum clean the fan. Maybe there is some dust where it shouldnt be.

Other than that, you could try to use mauiforg's guide and update
Your wii again.

Btw, do you only get this problem on Z:SS?

I am having some difficulties. I havent mess with my Wii in years. I am still softmod with Wii US 4.1. I had Neogamma like 49 so i deleted. I downloaded the new neogamma 52 but i cant seem to know how to install as a channel. Since in the folder there is no WAD. Also, instead of installing just cios249 i installed all recommended cios by accident. Right now, i have burned 3 times the game thinking there is something wrong with my burn. But it shows on the top wii game channel. The Legend of Zelda ......., but when i click on Neogamma (running from SD card since i cant install as a channel) load it, i then get a Disc can not be read error.

Can anyone tell me what am i doing wrong?

Originally Posted by dragonfire665

I am having some difficulties. I havent mess with my Wii in years. I am still softmod with Wii US 4.1. I had Neogamma like 49 so i deleted. I downloaded the new neogamma 52 but i cant seem to know how to install as a channel. Since in the folder there is no WAD. Also, instead of installing just cios249 i installed all recommended cios by accident. Right now, i have burned 3 times the game thinking there is something wrong with my burn. But it shows on the top wii game channel. The Legend of Zelda ......., but when i click on Neogamma (running from SD card since i cant install as a channel) load it, i then get a Disc can not be read error.

Can anyone tell me what am i doing wrong?

You're using Verbatim DVD-R media and burning @4X?

hi in sand stage were you have to get 3 stabs in block to open dungen the one with lighting freezes game i turned off wii and used 248 cios and it worked did it happend to you guys too should i post save past that part are you humping santa for are toys this year.after you humped santa you became a hacker post up if you got same freeze and need a save

My Wii has priiloader 0.3b on it. My brother is another location bought Skyward Sword the other day. Next. I am going to mail the Wii to my brother, so he can [COLOR=#009900 !important]play [/COLOR]Skyward Sword, but I was wondering if it would boot up like this? Do I need to update priiloader? I can't boot up the real copy of the game normally like a normal wii?

Originally Posted by powpowmeat

My Wii has priiloader 0.3b on it. My brother is another location bought Skyward Sword the other day. Next. I am going to mail the Wii to my brother, so he can [COLOR=#009900 !important]play [/COLOR]Skyward Sword, but I was wondering if it would boot up like this? Do I need to update priiloader? I can't boot up the real copy of the game normally like a normal wii?

I'm pretty sure I told you to follow this guide to get the game to work in your other thread.
Priiloader has nothing to do with the game.

<i>I'm pretty sure I told you to follow this </i>

My bad, I guess I have poor reading comprehension. I read what you said as ASK on this guide forum. Yeah, I already read the guide here. Does the disc bootup method = Real games?

By real games, I assume you mean the retail copy?
But yes, it will work for both backup and retail game.