Call Of Duty : Modern Warfare 3 Wii[Guide]

narse1979

Published on 11-09-2011 03:42 AM

900 Comments

Call Of Duty : Modern Warfare 3 [Guide]

Do not UPDATE your Wii.
Update = SoftMod Gone

YOU CAN GET THIS GAME RUNNING BY USING A cIOS WITH A BASE ios of 57

Note - If you have used Mauifrog's guide to modify your lovely Wii then you should have already installed the correct configuration to run the game.

Select in your USB Loader - cIOS 250 (57)
Or - Hermes cIOS 224 (57)

If you are not Soft Modded and would like to be then use Mauifrog's "Mod Any Wii Guide" Look --> Here.

If you are unsure if you have the correct cIOS then run a syscheck using this guide and check. (Thanks to Shift_Lock)

So this is what you are looking for in your syscheck

v2.1.0b10 by Double_A and R2-D2199...runs on IOS236 (rev 54321).

Region: PAL
System Menu 4.0/4.1E (v54450)
Priilaoder installed
Homebrew Channel 1.0.8 running on IOS58
Hollywood v0x11
Console ID: 119629258
Boot2 v4
Found 130 titles.
Found 52 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug, NAND Access
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug, NAND Access
IOS12 (rev 526): NAND Access
IOS13 (rev 1032): NAND Access
IOS14 (rev 1032): NAND Access
IOS15 (rev 1032): NAND Access
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access
IOS17 (rev 1032): NAND Access
IOS20 (rev 54321): Trucha Bug, NAND Access
IOS21 (rev 1039): NAND Access
IOS22 (rev 1294): NAND Access
IOS28 (rev 1807): NAND Access
IOS30 (rev 54321): Trucha Bug, NAND Access
IOS31 (rev 3608): NAND Access
IOS33 (rev 3608): NAND Access
IOS34 (rev 3608): NAND Access
IOS35 (rev 3608): NAND Access
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): NAND Access
IOS38 (rev 4124): NAND Access
IOS40 (rev 3072): Stub
IOS41 (rev 3607): NAND Access
IOS43 (rev 3607): NAND Access
IOS45 (rev 3607): NAND Access
IOS46 (rev 3607): NAND Access
IOS48 (rev 4124): NAND Access
IOS50 (rev 54321): Trucha Bug, NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): NAND Access
IOS55 (rev 5663): NAND Access
IOS56 (rev 5662): NAND Access
IOS57 (rev 5919): NAND Access
IOS58 (rev 6176): NAND Access, USB 2.0
IOS60 (rev 54321): Trucha Bug, NAND Access
IOS61 (rev 5662): NAND Access
IOS70 (rev 54321): Trucha Bug, NAND Access
IOS80 (rev 54321): Trucha Bug, NAND Access
IOS90 (rev 54321): Trucha Bug, NAND Access
IOS202[60] (rev 65535, Info: v5.1): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 65535, Info: v0.1): Trucha Bug, ES Identify, USB 2.0
IOS223[38] (rev 65535, Info: v0.1): Trucha Bug, ES Identify, USB 2.0
Use -->IOS224 [57] (rev 65535, Info: v5.1): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS247[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS248[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS249[38] (rev 21006, Info: d2x-v6): Trucha Bug, ES Identify, NAND Access
Or Use -->IOS250 [57] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535

Report generated on 2011/11/09.

I don't have the correct cIOS--How do I install it?

BackUp Disc Loading

_{This article was originally published in forum thread:

Call Of Duty : Modern Warfare 3 [Guide]
started by
narse1979} _{View original post}

Tags: call of duty wii, cod mw 3 wii, cod wii, modern warfare 3 wii, modern warfare guide

899 Comments

narse1979 - 11-10-2011, 12:55 PM
- Reply
Originally Posted by The Happy Dog

Nice one was stuck on loading running usbconfig. IOS 224 works great.

I guess that makes you a Happy Dog ha ha

nightstah - 11-10-2011, 01:27 PM
- Reply
Originally Posted by Grandpa1959

Why can't people follow the guides. Do they not teach logic in schools today, Read Read read, then 1,2,3,4, A,B,C etc: And as for the spelling well !!!! I supose some of you are using US English.

Heh, no kidding. My child completed 3rd grade and during the summer we got a thing from the school saying their grade "didn't make the grade" under the (toothless) "No Child Left Behind Act." The teaching credentials nowadays is far too... lenient for my tastes.

paulvickery1 - 11-10-2011, 01:43 PM
- Reply
Hi

So do I need NeoGamma-R9-Beta-50-forwarder.wad?

Shift_Lock - 11-10-2011, 01:45 PM
- Reply
Originally Posted by paulvickery1

Hi

So do I need NeoGamma-R9-Beta-50-forwarder.wad?

you need to read post 1....... the spoilers have everything you need...

zantecboy - 11-10-2011, 01:51 PM
- Reply
idk but can i use two thumb stick on my wii, one for playing wii games off my thumb drive and one for loading cfg loader?

Shift_Lock - 11-10-2011, 01:52 PM
- Reply
Originally Posted by zantecboy

idk but can i use two thumb stick on my wii, one for playing wii games off my thumb drive and one for loading cfg loader?

Make your own thread please. this is NOT where you should be asking that question.

nightstah - 11-10-2011, 01:53 PM
- Reply
Originally Posted by paulvickery1

Hi

So do I need NeoGamma-R9-Beta-50-forwarder.wad?

That'd be a neat trick... since the guide says cIOS 250 or 224. Unless you're using IOS Switcher... and Neo Gamma isn't listed as "confirmed" for working on this title (mainly because as-is, it uses cIOS 249).

Please read the actual guide, rather than posting FAIL posts.

zantecboy - 11-10-2011, 01:54 PM
- Reply
shift_lock its so i can play mw3 .. i need the loader on it

Shift_Lock - 11-10-2011, 01:55 PM
- Reply
Originally Posted by zantecboy

shift_lock its so i can play mw3 .. i need the loader on it

this is how to get the game running not how to use 2 thumb drives.. make your own thread..

nightstah - 11-10-2011, 01:56 PM
- Reply
Originally Posted by zantecboy

shift_lock its so i can play mw3 .. i need the loader on it

Originally Posted by Shift_Lock

Make your own thread please. this is NOT where you should be asking that question.

zantecboy - 11-10-2011, 02:00 PM
- Reply
I apologize

nightstah - 11-10-2011, 02:02 PM
- Reply
Originally Posted by zantecboy

I apologize

Apology accepted...

paulvickery1 - 11-10-2011, 02:14 PM
- Reply
Hi

im running R8 b7 at the mo, and have read through the post and be looking at useful links but still cant find a reference to R9 Beta 50 and where to get it. It is installed as a new WAD or can I update the old version on my Wii across the net?

nightstah - 11-10-2011, 02:16 PM
- Reply
Click the last spoiler in the guide... READ ALL OF IT, otherwise you FAIL.

Shift_Lock - 11-10-2011, 02:17 PM
- Reply
there is a lot of fail today..... does no one know how to use spoilers?? you click it...
from post 1:

the spoiler says:
BackUp Disc Loading SoftMod" Thanks to BMarlo for this great mini guide and video

nightstah - 11-10-2011, 02:19 PM
- Reply
Seriously, you guys really need to re-think the philosophy of this guide and user fail. It got SOOOOOOOOOOOO bad in Cile's Wads thread that I added "ask for the password, you get infracted" type disclaimer. Maybe this should be "Read the guide - asking questions that demonstrate a lack of reading it will get you an infraction," lol

paulvickery1 - 11-10-2011, 02:25 PM
- Reply
hi

SPOILER - BackUp Disc Loading SoftMod" Thanks to BMarlo for this great mini guide and video ???

last bits says If you don't have Neogamma R9 b50, go HERE......

it gives me a load of folders whereas i've been using WADs for softmodding.

Shift_Lock - 11-10-2011, 02:28 PM
- Reply
ok... Im gonna infract you if you dont READ!

Put both Neogamma, and Neogamma IOS Switcher in the Apps folder of your SD card, and now watch the Vid..

the video is key AFTER you download the files............

All that is in the "mini guide"

nightstah - 11-10-2011, 02:28 PM
- Reply
Originally Posted by paulvickery1

it gives me a load of folders whereas i've been using WADs for softmodding.

It loads a MediaFire page. You should see this:

25406 NeoGammaR9beta50.zip
(1.41 MB)
Click here to start download from MediaFire..

^That'd be a hint you gotta click that link...