Call Of Duty : Modern Warfare 3 Wii[Guide]

narse1979

Published on 11-09-2011 03:42 AM

900 Comments

Call Of Duty : Modern Warfare 3 [Guide]

Do not UPDATE your Wii.
Update = SoftMod Gone

YOU CAN GET THIS GAME RUNNING BY USING A cIOS WITH A BASE ios of 57

Note - If you have used Mauifrog's guide to modify your lovely Wii then you should have already installed the correct configuration to run the game.

Select in your USB Loader - cIOS 250 (57)
Or - Hermes cIOS 224 (57)

If you are not Soft Modded and would like to be then use Mauifrog's "Mod Any Wii Guide" Look --> Here.

If you are unsure if you have the correct cIOS then run a syscheck using this guide and check. (Thanks to Shift_Lock)

So this is what you are looking for in your syscheck

v2.1.0b10 by Double_A and R2-D2199...runs on IOS236 (rev 54321).

Region: PAL
System Menu 4.0/4.1E (v54450)
Priilaoder installed
Homebrew Channel 1.0.8 running on IOS58
Hollywood v0x11
Console ID: 119629258
Boot2 v4
Found 130 titles.
Found 52 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug, NAND Access
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug, NAND Access
IOS12 (rev 526): NAND Access
IOS13 (rev 1032): NAND Access
IOS14 (rev 1032): NAND Access
IOS15 (rev 1032): NAND Access
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access
IOS17 (rev 1032): NAND Access
IOS20 (rev 54321): Trucha Bug, NAND Access
IOS21 (rev 1039): NAND Access
IOS22 (rev 1294): NAND Access
IOS28 (rev 1807): NAND Access
IOS30 (rev 54321): Trucha Bug, NAND Access
IOS31 (rev 3608): NAND Access
IOS33 (rev 3608): NAND Access
IOS34 (rev 3608): NAND Access
IOS35 (rev 3608): NAND Access
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): NAND Access
IOS38 (rev 4124): NAND Access
IOS40 (rev 3072): Stub
IOS41 (rev 3607): NAND Access
IOS43 (rev 3607): NAND Access
IOS45 (rev 3607): NAND Access
IOS46 (rev 3607): NAND Access
IOS48 (rev 4124): NAND Access
IOS50 (rev 54321): Trucha Bug, NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): NAND Access
IOS55 (rev 5663): NAND Access
IOS56 (rev 5662): NAND Access
IOS57 (rev 5919): NAND Access
IOS58 (rev 6176): NAND Access, USB 2.0
IOS60 (rev 54321): Trucha Bug, NAND Access
IOS61 (rev 5662): NAND Access
IOS70 (rev 54321): Trucha Bug, NAND Access
IOS80 (rev 54321): Trucha Bug, NAND Access
IOS90 (rev 54321): Trucha Bug, NAND Access
IOS202[60] (rev 65535, Info: v5.1): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 65535, Info: v0.1): Trucha Bug, ES Identify, USB 2.0
IOS223[38] (rev 65535, Info: v0.1): Trucha Bug, ES Identify, USB 2.0
Use -->IOS224 [57] (rev 65535, Info: v5.1): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS247[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS248[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS249[38] (rev 21006, Info: d2x-v6): Trucha Bug, ES Identify, NAND Access
Or Use -->IOS250 [57] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535

Report generated on 2011/11/09.

I don't have the correct cIOS--How do I install it?

BackUp Disc Loading

_{This article was originally published in forum thread:

Call Of Duty : Modern Warfare 3 [Guide]
started by
narse1979} _{View original post}

Tags: call of duty wii, cod mw 3 wii, cod wii, modern warfare 3 wii, modern warfare guide

899 Comments

narse1979 - 11-09-2011, 03:52 AM
- Reply
Spoilers were killing me lmao

cjizzle - 11-09-2011, 06:33 AM
- Reply
Awesome narse! This one is going in my bookmarks for sure lol

gogos1996 - 11-09-2011, 07:09 AM
- Reply
if i am ntsc and i buy pal what happens and the vice versa...or if i have changed my region from ntsc to pal what to do!!!?????

narse1979 - 11-09-2011, 07:32 AM
- Reply
You can change the region in the settings of the usb loader.

arifnazran - 11-09-2011, 08:46 AM
- Reply
Even with the cIOS224 base57 and cIOS250 base57 installed i still cant get to play MW3 After the 'Loading...' screen it shows the 'Call of Duty MW3' logo which somehow made my Wii freeze. .Can somebody help me? I can play black ops smoothly with IOS224 on uLoader and IOS249.

Could this be bad ISOs or just my Wii?

oddgriffin - 11-09-2011, 08:49 AM
- Reply
Bad .iso?

Rerip the game and see.

nightstah - 11-09-2011, 08:51 AM
- Reply
Originally Posted by arifnazran

Could this be bad ISOs or just my Wii?

When you originally softmodded your Wii, did you follow mauifrog's guide or some other site's?

oddgriffin - 11-09-2011, 08:53 AM
- Reply
Yep you found your problem. Piracy

nightstah - 11-09-2011, 08:54 AM
- Reply
Don't you love when a big major release hits, all the folks who come out of the woodwork and have total disregard for forum rules?

narse1979 - 11-09-2011, 08:54 AM
- Reply
WiiHacks doesn't support Piracy...

fear_bot - 11-09-2011, 09:06 AM
- Reply
Great tutorial!

It's a good game, but I hate the fact that I can't "continue where you left off in MW2".

Lag is a bit terrible on Spec Ops also, and hit detection on multiplayer is a bit off too.

Other than that, great game.

franic - 11-09-2011, 09:24 AM
- Reply
I live in croatia so i cant still buy the game my friend has not softmoded ntsc wii and bought the game so he borrowed me a game to rip it and put it my question is will i be able to play NTSC game trough configurable usb loader and how. Thanks in advance!!!

maxigawa - 11-09-2011, 09:24 AM
- Reply
Hi i got it to load using neogamma R8 beta 12. IOS249 (Rev 20) available here--
Removed

ofcourse install the iOS249[57]-v20 to get the rev 20.
link here-- Removed. Get the cios from the guide
enjoy!

nightstah - 11-09-2011, 09:26 AM
- Reply
Once again, bad/incomplete advice...

franic - 11-09-2011, 09:29 AM
- Reply
tell me good advice have everything installed.

maxigawa - 11-09-2011, 09:33 AM
- Reply
not bad advise as the game loads using the above settings....

Originally Posted by franic

tell me good advice have everything installed.

try my links it loads from disk using them

franic - 11-09-2011, 09:35 AM
- Reply
My question is i have cfg usb loader and i want to launch NTSC game on PAL wii so are the settings he told me are good ??

oddgriffin - 11-09-2011, 09:36 AM
- Reply
Sailing on a ship of FAIL. LA la la

Originally Posted by franic

My question is i have cfg usb loader and i want to launch NTSC game on PAL wii so are the settings he told me are good ??

look at post#6. Sorry you missed it with such a large thread to search through.

franic - 11-09-2011, 09:38 AM
- Reply
Thanks for helping ......

oddgriffin - 11-09-2011, 09:41 AM
- Reply
Originally Posted by maxigawa

not bad advise as the game loads using the above settings....

try my links it loads from disk using them

The Cios recommended are listed in the guide.
Anything you are saying about downgrading a cios, and breaking the softmod, do not coincide with the guide. Therefore there is no reason to post it in this thread.

BackUp Disc Loading SoftMod

Loading via Neogamma -Install --> cIOS 249 Base 57 (DOWNLOAD) (v21d2x6)
Note - Install cIOS WAD using the instructions in the USB Loading Spoiler

Call Of Duty : Modern Warfare 3 Wii[Guide]

So this is what you are looking for in your syscheck

I don't have the correct cIOS--How do I install it?

BackUp Disc Loading

BackUp Disc Loading SoftMod

vBulletin Message

Recent Threads

USB Controller question

Need some help with R4i 3DS Gold

newbie with some questions before getting started

nand backup question

Wii media player

would someone mind looking at my syscheck?