Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Brick: Only Rescue Menu is starting...

  1. #1
    New Member
    Join Date
    Feb 2011
    Posts
    73
    Thanks
    26
    Thanked 0 Times in 0 Posts

    Brick: Only Rescue Menu is starting...

    Hi

    I have buy a wii on ebay.
    It is a bootmii as boot2 Wii.
    Now, i maked a nand backup and look at them with nand builder.
    I see a serial number in the setting.txt, who never can be right.
    Because, the serial number in setting.txt can never be a bootmii as boot2 wii.
    i think, the serial number on the wii is also not right, because i have make a new nand with the nand builder an the serial number on wii housing ... but no works...
    Bluetooth Modul and wlan modul are ok.
    Any guy has changed the serial number in the setting.txt on nand

    This crazy wii only starts the rescue menu with 4.1e..

    So:
    - i have a wii with starting BootMii as Boot2
    - i have no right nand backup
    - i dont know the serial number
    - i dont know .... is this an pal wii or another region

    What can i do?
    Thank you

  2. #2
    Senior Member
    Retired WiiHacks Staff
    narse1979's Avatar
    Join Date
    Mar 2010
    Location
    Southern Fairy Land
    Posts
    7,489
    Thanks
    826
    Thanked 1,775 Times in 1,371 Posts
    Blog Entries
    7
    You made a nand backup from that wii and now you are saying it isnt for that wii? Sorry your post is a little mixed up. How have you become bricked?


  3. #3
    New Member
    Join Date
    Feb 2011
    Posts
    73
    Thanks
    26
    Thanked 0 Times in 0 Posts
    there was a lamer on work ...
    i have make a nand backup from this wii, bootmii was installed on wii.
    i have buy this wii on ebay.

    On the wii the serial number likes.... LEH115 <- boot2 kompatible
    On the setting.txt on wii nand the serial numer likes ... LEF100 <- normally not boot2 kompatible
    so i think, somebody has installed a nand backup from another wii or have changed the serialnumber.

    i dont have the really right serial number from this wii motherboard....

  4. #4
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Forum Administrator
    IRC AOP
    Wall-Eyed Mucksucker
    emuhack's Avatar
    Join Date
    Aug 2009
    Location
    Windy City
    Posts
    7,473
    Thanks
    892
    Thanked 2,132 Times in 1,347 Posts
    Blog Entries
    13
    You need to use a better translation software.... because you are not making sense....

    -----------------------
    Via Wiihacks Mobile App

  5. 1 User Says Thank You emuhack For This Useful Post


  6. #5
    New Member
    Join Date
    Feb 2011
    Posts
    73
    Thanks
    26
    Thanked 0 Times in 0 Posts
    Okay, once more.

    So, I have bought a BootMii as Boot2 Wii.
    BootMii started and I thought, provided simply make a NAND backup, with the NAND Builder anew formed NAND Backup and again recovery by BootMii.

    When I have looked at the backup NAND, I have found out that in the NAND of the Wii a serial number is stored which can belong not really to a BootMii as Boot2 capable Wii.

    Hence, I think:
    Either the standard number was changed, or another backup NAND of another Wii was played in.

    The result is:
    Only more the Rescue menu with the announcement 4.1e begins the Wii

    My question, how get i the original serial number affects?
    How do I reach to the right original serial number or how I bring these Wii again to starting?

    Many thanks

  7. #6
    New Member baierme2's Avatar
    Join Date
    Sep 2011
    Location
    out for lunch be back in 5mins
    Posts
    26
    Thanks
    8
    Thanked 4 Times in 4 Posts
    try this for your system firmware use a gamecube controller you want to take it a part and use the rubber 4button d pad and and plug it in to the 4 slot then hold down all four buttons and turn on the wii you should see your firmware number in the lower right hand side then your going to need a auto boot disc like universal-unbrick-disc-v3 with also buying a mod chip for the dvd drive. Autoboot defaulted DK2.0 | VanCityMods.com this chip should be good on all wii i checked last night and even d4 with is the newer wii can read dvds

  8. #7
    New Member
    Join Date
    Feb 2011
    Posts
    73
    Thanks
    26
    Thanked 0 Times in 0 Posts
    New knowledge:
    In the backup NAND from this Wii stands Boot2v4
    Dop-Mii says Boot2v3 is on this Wii installed.
    If I update Boot2, still starts BootMii or is BootMii erase?

    I can start the Homebrew Channel with BootMii.
    Normaly, the Wii must be in german language, but the Homebrew Channel ist in english language.
    Are there perhaps a conflict with the region?

    Thank you!

  9. #8
    Senior Member
    Retired WiiHacks Staff
    narse1979's Avatar
    Join Date
    Mar 2010
    Location
    Southern Fairy Land
    Posts
    7,489
    Thanks
    826
    Thanked 1,775 Times in 1,371 Posts
    Blog Entries
    7
    If the rescue menu is stating 4.1e then that is what your sm is......

    Look at this guide ---> http://www.wiihacks.com/bricked-wii-...tion-here.html


  10. #9
    New Member
    Join Date
    Feb 2011
    Posts
    73
    Thanks
    26
    Thanked 0 Times in 0 Posts
    Hi

    Thank you ... but i can only use a gamecube Controller and the 1.5 mod link is dead. Invalid or Deleted File.
    Is this not the same as ... I start the homebrew channel, then the wad Manager and install these two files - i do this so...

    The Homebrew Channel i have installed with bootmii - bootmini.elf.
    On BootMii as Boot2 i start the homebrew channel.

    I open my windw and trough out this fu****ing wii ....

  11. #10
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,572 Times in 2,972 Posts
    Blog Entries
    15
    Do chapter 2 from my softmod guide, see if that fixes your issue. If not load a game from the HBC and see if the games load. If the game does not load it is probably a bad bt module, or not seated fully. Try to reseat the bt module or replace. Hopefully chapter 2 will fix it for you.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •