Results 1 to 3 of 3

Thread: 4.1U Banner Bricked Wii, boot2 compatible (installed I thought?!), help?!

  1. #1
    New Member
    Join Date
    May 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    4.1U Banner Bricked Wii, boot2 compatible (installed I thought?!), help?!

    I have a 4.1U banner bricked Wii. It gets to the health & safety screen and the "press A" never appears.

    This wii was bought at release, and I installed a modchip then, whatever the first one released was, I can't remember at this point.

    I'm able to boot into WadManager from a SD card using the cboot2/WAD manager zips found on this board. I also hacked a GC controller for a savemiifrii, however I can't get any of the discs (UUD2, AutoBoot ARC) to boot, the discs spin up, it says 4.1(USA) in the left corner of the screen, and they just don't boot up.

    I tried to do this on my own with the help of the guides here but I'm out of options at this point.

    Any ideas?

  2. #2
    WiiHacks Staff
    Only Site Donators Can PM Staff

    Junior Moderator
    Bliepo's Avatar
    Join Date
    Nov 2009
    Location
    On your harddrive (file name: Bliepo.crazy)
    Posts
    1,581
    Thanks
    241
    Thanked 391 Times in 312 Posts
    Blog Entries
    4
    Did you try this guide (it's a bit heavy for your problem, but will certainly work): http://www.wiihacks.com/bricked-wii-...tion-here.html
    Awesome sig picture does not work
    Brick Prevention- Things you should never do | Ignoring advice and bricking | Be a jedi, donate
    Guide: Softmod ANY wii | How to post a system check | Loading and Playing Wii Backup Games from USB HDD (softmod only)
    System Menu X (IOS150, E) | HBC 1.08 (IOS58) | bootmii/boot2v4 | priiloader 0.7 | cIOSX rev21d2x_v6 (main base IOS 57) | cIOS 223 (IOS 37 + 38 merged) | USB Loader GX 2.2

  3. #3
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,571 Times in 2,972 Posts
    Blog Entries
    15
    Do you have the channel wad that bannerbricked your wii?

    1- DL cboot2 to your sd card, this is a cboot2 bootmii folder and a startup.elf file
    2- DL wii mod 2.6, extract the wii mod files directly to the root of your sd card. You should have wii mod as sd:\boot.dol
    3- Boot the wii, wii mod will load. If you have the bad wad uninstall it with the wad manager.
    If you do not know what is bannerbricking your wii, go to wii mod "Advanced" menu, select any title deleter. The bannerbrick channel will be under "Installed Channels", go there and delete the bad channel or delete them all. It is safe to delete everything except system titles and hidden channels. So don't delete your system menu and don't delete ios.
    If that does not help, do chapter 2 of my softmod guide.

    Your disc do not load via modchip because your system ios is not patched, but you can load cboot2 so you don't need to use disc.
    -wii mod 2.6 link
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •