Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Problems with Infectus 2 and Xavbox Programmer

  1. #1
    New Member
    Join Date
    Oct 2010
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Question Problems with Infectus 2 and Xavbox Programmer

    Hello,
    i have a bricked Wii here. Unfortunately I have no NAND Backup and no Keys. I connect the NAND Chip with the Infectus 2 and used the Infectus NAND Flasher 1.03 to make a NAND dump. With WiiNand I have extracted the Keys to keys.bin.
    Then I used Betwiin to make another NAND Backup with the keys.bin.
    Everything worked fine.
    Now I want to flash the new NAND with the Xavbox NAND Programmer, but if I compare the data after the flash, it es different. The Programmer also show the wrong Chip Ident. It shows Hynix HY27UF084G2M, but the Chip on the Wii board is a Hynix HY27UF084G2B.
    Is there anything I forgot to do?
    Can anybody tell me, for what the two switches on the little Infectus board are? (the one with the usb port). The description ist "ON" on the one side and 1,2 on the other side.

    greetz
    Crypto

  2. #2
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    18,583
    Thanks
    1,872
    Thanked 4,354 Times in 3,651 Posts
    Blog Entries
    5
    There's at least two Infectus guides on this site, did you even bother to check them out or attempt to follow them?

  3. #3
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2
    Quote Originally Posted by Crypto71 View Post
    Hello,
    i have a bricked Wii here. Unfortunately I have no NAND Backup and no Keys.
    If you have no nand backup and no keys, what are you using with betwiin?? you need the keys of the bricked Wii to use betwiin...

  4. #4
    Junior Member streamlinehd's Avatar
    Join Date
    Mar 2010
    Location
    East Coast, USA
    Posts
    1,369
    Thanks
    114
    Thanked 557 Times in 377 Posts
    Blog Entries
    3
    Now I want to flash the new NAND with the Xavbox NAND Programmer, but if I compare the data after the flash, it es different.
    This is usually due to a bad connection or crossed connection (short) to your NAND.

    The Programmer also show the wrong Chip Ident. It shows Hynix HY27UF084G2M, but the Chip on the Wii board is a Hynix HY27UF084G2B.
    Is this happening with Xavbox or the Infectus flasher or both? What version of Xavbox are you using and where did you download it from? Are you sure you have the most recent drivers?

    Quote Originally Posted by Bad_Ad84 View Post
    If you have no nand backup and no keys, what are you using with betwiin?? you need the keys of the bricked Wii to use betwiin...
    Good call Bad.
    Last edited by streamlinehd; 10-31-2010 at 07:30 AM.
    Cogita ante salis
    If you're happy with the help I provided, don't forget to hit my thanks button


  5. #5
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2
    He is probably correct about the chip part number.

    The applications have the chip name hardcoded. When you ID a chip, it doesnt return the full name, just an ID.

    However, the different between G2M and G2B is just which generation it is (according to the datasheets) and likely give the same ID. So thats not a problem and can safely be ignored.

    This is probably just typical infectus ground bounce.

  6. #6
    New Member
    Join Date
    Oct 2010
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I made a NAND dump with the Infectus NAND Flasher 1.03 from the bricked console. And with WiiNAND I extracted the Keys from this dump.

    I tried to follow this guide http://www.wiihacks.com/bricked-wii-...-tutorial.html, but the wii does not have a vulnerable boot1.

  7. #7
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2
    You cant extract the keys from a dump created with Infectus, only from dumps made with bootmii.

    This is because bootmii adds the keys onto the end of the nand dump. The keys are NOT stored in the NAND, they are within the hollywood CPU and you need to run code on the Wii to get them.

    If your boot1 isnt vulnerable and you do not have the nand backup or keys from BOOTMII, you cant fix it.

    This has been said a million times, in a million threads.

  8. #8
    New Member
    Join Date
    Oct 2010
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    But why WiiNAND shows me the keys when I opened the NAND dump which I made with the Infectus NAND flasher?

  9. #9
    Junior Member streamlinehd's Avatar
    Join Date
    Mar 2010
    Location
    East Coast, USA
    Posts
    1,369
    Thanks
    114
    Thanked 557 Times in 377 Posts
    Blog Entries
    3
    I'm not sure how Wiinand would've given you any sort of keys in the first place

    As Bad_Ad said, the keys aren't attached to the NAND.
    Cogita ante salis
    If you're happy with the help I provided, don't forget to hit my thanks button


  10. #10
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2
    You probably had keys.bin in the same folder from another wii?

    Doesnt really matter, as what you are trying to do cannot be done.

    Why do you think we tell people you cant fix the wii without a backup or vulnerable boot1 if this worked?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •