Results 1 to 5 of 5

Thread: Wii freezes when changing Widescreen settings from 16:9 to 4:3 and then back again.

  1. #1
    New Member
    Join Date
    Jul 2009
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post

    Wii freezes when changing Widescreen settings from 16:9 to 4:3 and then back again.

    I have a problem that you guys have probably never seen before. I've tried many things to fix it, including mauifrog's guide to fix a semi-brick but I still have no luck in fixing it.

    I can enter the Wii settings menu fine, but after changing the widescreen settings from 16:9 to 4:3 and then back to 16:9, the Wii freezes up (black screen, high pitched continuous sound coming from TV).

    I've got a launch model PAL Wii on 4.2e, bootmii installed, no system menu hacks, plenty of free blocks, this never used to happen - has only been happening in the last few months, have a genuine WiiKey v1 installed (from before HBC existed).

    Any ideas why this happens or, more importantly, how to fix it?

  2. 1 User Says Thank You pwnsweet For This Useful Post


  3. #2
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,188
    Thanks
    307
    Thanked 9,584 Times in 2,974 Posts
    Blog Entries
    15
    So what happens after you restart the wii? Did the 16:9 setting take effect, and the wii functions? You have boot2 bootmii installed?

    You could backup and important savegames and channels, perhaps just make a new nand dump, then try a wii system format from the wii settings.

    If that did not help, I would suggest a nand format with the nand formater.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  4. #3
    New Member
    Join Date
    Jul 2009
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    Upon restarting the Wii, the setting change (in this case going from 4:3 back to 16:9) has taken effect. It's important to note that this problem isn't limited to starting at 16:9, going to 4:3 and then back to 16:9 again. The opposite is also true.

    In addition, it also occurs when changing the TV Type (ie, going from 480p to 480i and back again or even 480p->480i->576i and any combination of the three).

    Bootmii is installed as boot2. I'll try your initial suggestion of performing a system format and see how it goes. If it fixes it, that'd be great, but it would be nice to know the reason for the problem so I can avoid it from happening again.

  5. #4
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2
    Id just take a full nand backup in bootmii, then follow my nand formatter guide.

    If after doing the nand format the issue persists, then its a hardware issue and you can restore your backup and be no worse off.

    From there we can fault find the issue, at least we would know if its software or hardware.

  6. #5
    New Member
    Join Date
    Jul 2009
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    OK I actually figured out what was causing the problem. The reason it was happening is because I had a system menu hack on that changed the video mode to NTSC in AnyRegionChanger.

    I initially thought all menu hacks were off because I use Startpatch for other menu hacks and only turned these off and forgot about AnyRegionchanger.


    Note: To anyone wondering why I was using the video mode hack, it's because PAL virtual console games run slower than their NTSC counterpart and are 576i instead of 480p. By forcing NTSC video mode in AnyRegionChanger, you can install and run NTSC VC games on a PAL Wii without permanently changing it's region (ie, remaining on 4.2e).
    Last edited by pwnsweet; 10-25-2010 at 07:34 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •