Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Wii Bricked 4.0 Europ

  1. #1
    New Member
    Join Date
    Dec 2008
    Posts
    37
    Thanks
    4
    Thanked 0 Times in 0 Posts

    Wii Bricked 4.0 Europ

    Hello!

    I have a Wii that has a corrupt system something.
    The dude who try to make the Wii works, wasn't so succesfull.

    The following information is avab.
    Signcheck gives this answer:

    Code:
    "SignCheck 0.3b aka loveSexWii build report"
    "Wii region", Europe
    "Wii unique device id", 48104779
    
    "IOS number", "Trucha bug", "Flash access", "Boot2 access", "Usb2.0 IOS tree"
    
    "IOS250 (ver 65535)", Disabled, Disabled, Disabled, Enabled
    "IOS61 (ver 4890)", Disabled, Disabled, Disabled, Disabled
    "IOS60 (ver 6174)", Disabled, Disabled, Disabled, Disabled
    "IOS55 (ver 5149)", Disabled, Disabled, Disabled, Disabled
    "IOS53 (ver 5149)", Disabled, Disabled, Disabled, Disabled
    "IOS38 (ver 3610)", Disabled, Disabled, Disabled, Disabled
    "IOS37 (ver 3612)", Disabled, Disabled, Disabled, Disabled
    "IOS36 (ver 3094)", Disabled, Disabled, Disabled, Disabled
    "IOS35 (ver 1040)", Disabled, Enabled, Disabled, Disabled
    "IOS34 (ver 3091)", Disabled, Disabled, Disabled, Disabled
    "IOS33 (ver 2834)", Disabled, Disabled, Disabled, Disabled
    "IOS31 (ver 3092)", Disabled, Disabled, Disabled, Disabled
    "IOS28 (ver 1293)", Disabled, Disabled, Disabled, Disabled
    "IOS22 (ver 780)", Disabled, Disabled, Disabled, Disabled
    "IOS17 (ver 518)", Disabled, Disabled, Disabled, Disabled
    "IOS14 (ver 263)", Disabled, Disabled, Disabled, Disabled
    "IOS13 (ver 16)",   Disabled, Disabled, Disabled, Disabled
    Then gives the HBC installer:

    Code:
    unable to install ticket (-1030001024)
    FAILED (-1030001024)
    i also followed this tut.
    http://www.wiihacks.com/recommended-...lling-hbc.html

    Then i get a "RET -4100" error while trying install anything with step 2 on the tutorial

    The official thread where it started was:
    Here

    --

    I hope that someone can help me..

    Ciao,

    John

  2. #2
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2
    Is bootmii installed as boot2? if so, id just do a nand backup and use the nand formatter to return it to a fresh state.

    read from post 575 onwards in full:

    http://www.wiihacks.com/bricked-wii-...n-here-58.html

  3. #3
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,191
    Thanks
    307
    Thanked 9,584 Times in 2,974 Posts
    Blog Entries
    15
    Unfortunatly I don't have any new ideas since the last time we tried to fix this wii. It does look like bootmii ios is gone now, I think you had it last time- would have been nice to try sneek if you still had it. Unfortunatly HBC, bootmii, etc is gone- and for whatever reason, any attempt to install anything will fail.

    I am thinking this type of error is some kind of hardware failure, not sure.

    If you have a warranty, you could black screen it by using ATD mod with ios250, then delete ios60 and all the rest.

    Perhaps signcheck can't see bootmii ios, try syscheck 1.6. If you have bootmii ios, you should be able to load sneek and have some more functionality with the wii. Also if you have bootmii ios, there is a nand formater compile only to install wads (not format)- it would be interesting what that would do (could be risky). You could also try to actually format the nand, which would probably brick the wii for good, but it could fix the issue.
    Last edited by mauifrog; 06-03-2010 at 02:46 PM.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  4. #4
    Senior Member Krank's Avatar
    Join Date
    Jan 2010
    Posts
    8,895
    Thanks
    953
    Thanked 4,321 Times in 2,128 Posts
    Blog Entries
    7
    Perhaps signcheck can't see bootmii ios
    I can confirm that.
    Damn I suck!!!!

  5. #5
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2
    Quote Originally Posted by mauifrog View Post
    Unfortunatly I don't have any new ideas since the last time we tried to fix this wii. It does look like bootmii ios is gone now, I think you had it last time- would have been nice to try sneek if you still had it. Unfortunatly HBC, bootmii, etc is gone- and for whatever reason, any attempt to install anything will fail.

    I am thinking this type of error is some kind of hardware failure, not sure.

    If you have a warranty, you could black screen it by using ATD mod with ios250, then delete ios60 and all the rest.

    Perhaps signcheck can't see bootmii ios, try syscheck 1.6. If you have bootmii ios, you should be able to load sneek and have some more functionality with the wii. Also if you have bootmii ios, there is a nand formater compile only to install wads (not format)- it would be interesting what that would do (could be risky). You could also try to actually format the nand, which would probably brick the wii for good, but it could fix the issue.
    If you dont have bootmii as boot2 and only as an IOS, you can still use the nand formatter - ive tested this and it works. Only problem is, if it goes wrong you are screwed (unless you have a nand programmer).

  6. #6
    New Member
    Join Date
    Dec 2008
    Posts
    37
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Bad_Ad84 View Post
    Is bootmii installed as boot2? if so, id just do a nand backup and use the nand formatter to return it to a fresh state.

    read from post 575 onwards in full:

    http://www.wiihacks.com/bricked-wii-...n-here-58.html
    Bad luck for me.. I haven't a nand backup

  7. #7
    New Member
    Join Date
    Dec 2008
    Posts
    37
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by mauifrog View Post
    You could also try to actually format the nand, which would probably brick the wii for good, but it could fix the issue.

    How can i do that?

  8. #8
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2

  9. #9
    New Member
    Join Date
    Dec 2008
    Posts
    37
    Thanks
    4
    Thanked 0 Times in 0 Posts
    but i don't have bootmii.. can i run it from the SD Card?

  10. #10
    Junior Member
    Join Date
    Dec 2009
    Location
    England
    Posts
    1,304
    Thanks
    7
    Thanked 320 Times in 240 Posts
    Blog Entries
    2
    you dont have bootmii at all? just the HBC channel? how are you running signcheck?
    Last edited by Bad_Ad84; 06-07-2010 at 10:00 AM.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •