Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Could be Bricked? Advise Needed

  1. #1
    Junior Member
    Join Date
    Feb 2010
    Posts
    9
    Thanks
    1
    Thanked 1 Time in 1 Post

    Could be Bricked? Advise Needed

    G'day, Mates.

    Ive had a Squiz Around Forums :|

    Ive Done everything Pretty Simple and slow got everything working.

    had Usb Loader working. and gamma with 002 fix,

    Was playing particular game "backed up copy"

    Put in a new game and got the error 002 again so i went looking for iso60 to see if needed this. did not get to the point of using.

    I opened up priiloader

    clicked + for install then it came up with an error could not find files no worries press button to restart wii. then down my screen came numerous letters and numbers

    Shut down wii went to turn it on

    now the LED power light comes on, disc drive light comes on for a second. can hear disc drive spin at start.

    but no power is going to the tv i just get the AV channel No Signal.
    tested wii on other tv still get no signal from wii to tv.

    Any help be great. as ive only been playin around with the wii for 3 days now and keen to learn.

    note: i have v3.1 with cIOS38Rev17

    Cheers Mate,

  2. #2
    Retired WiiHacks Staff Tealc's Avatar
    Join Date
    May 2009
    Location
    Sunny Wales, UK
    Posts
    7,152
    Thanks
    502
    Thanked 4,104 Times in 2,453 Posts
    Blog Entries
    1
    Press and hold reset when you start the Wii.

    You mention IOS60. What did you do with it?
    Not really doing much Wii stuff these days.

  3. #3
    Junior Member
    Join Date
    Feb 2010
    Posts
    9
    Thanks
    1
    Thanked 1 Time in 1 Post
    Hey Mate,

    Tried The Reset Button. No Go. Tried Turning Wii On Thru Remote Wii Turns On. But Remote does not go to 1 square, The LED Colours are all blue, Read somewhere maybe take all cords out leave Wii off for 24 hours maybe it overheated? (Suspect Thou)

    My Apologies i Ment IOS61 with Shop Channel - I had just copied Files to SD

    Note - was First time i had opened Priiloader up - (Taken From Readme - Priiloader v0.1(rev15 from svn , which is based on preloader 0.30). I Open Due to i was going to change and put Priiloader REV59 on instead. And wanted to investigate the one I Already Had on.

    So Last Thing i Had Done was Opened Priiloader.
    Also Noted I Dont Have and Never Have connected Wii to Internet.

    Ta,

  4. #4
    Junior Member
    Join Date
    Feb 2010
    Location
    Netherlands
    Posts
    33
    Thanks
    6
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by M_Shifty View Post
    Hey Mate,

    Tried The Reset Button. No Go. Tried Turning Wii On Thru Remote Wii Turns On. But Remote does not go to 1 square, The LED Colours are all blue, Read somewhere maybe take all cords out leave Wii off for 24 hours maybe it overheated? (Suspect Thou)

    My Apologies i Ment IOS61 with Shop Channel - I had just copied Files to SD

    Note - was First time i had opened Priiloader up - (Taken From Readme - Priiloader v0.1(rev15 from svn , which is based on preloader 0.30). I Open Due to i was going to change and put Priiloader REV59 on instead. And wanted to investigate the one I Already Had on.

    So Last Thing i Had Done was Opened Priiloader.
    Also Noted I Dont Have and Never Have connected Wii to Internet.

    Ta,
    If you can turn the wii on with your wiimote, you probably have a low-level brick.
    Edit: If you can still acces priiloader(or bootmii, if you have that too), you are not screwed .
    EDIT2: If you have installed priiloader you schould be able to access it..Did you try savemiifrii?

    ~DeRenoo
    Last edited by derenoo; 02-17-2010 at 02:16 AM.

  5. #5
    Junior Member
    Join Date
    Feb 2010
    Posts
    9
    Thanks
    1
    Thanked 1 Time in 1 Post
    I Grabbed a Clean SD

    Went over to topic about making a Bootmi SD

    Copied - cBoot2_+_Wad_Manager
    - IOS30-64-v1040
    - SystemMenu-PAL-v290

    Still wont load wii up to a screen. still says AV Channel No Signal

  6. #6
    Junior Member
    Join Date
    Feb 2010
    Location
    Netherlands
    Posts
    33
    Thanks
    6
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by M_Shifty View Post
    I Grabbed a Clean SD

    Went over to topic about making a Bootmi SD

    Copied - cBoot2_+_Wad_Manager
    - IOS30-64-v1040
    - SystemMenu-PAL-v290

    Still wont load wii up to a screen. still says AV Channel No Signal
    Try plugging a GC controller in port 4. When you boot the wii, press all 4 buttons on the D-Pad at once. Do you see a recovery menu?

  7. #7
    Junior Member
    Join Date
    Feb 2010
    Posts
    9
    Thanks
    1
    Thanked 1 Time in 1 Post
    I'll Have to go buy one tomorrow its 10:30pm atm.

    Had High Hopes and went and grabbed the N64 remote but to big.

    Even Thou the wii is not responding to my TV Vice Versa.
    The Wii is not even loading or anything the tv just stays the same. kinda like oh i have power but No Monitor Cord Plugged in

    Ta,

  8. #8
    Junior Member
    Join Date
    Feb 2010
    Location
    Netherlands
    Posts
    33
    Thanks
    6
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by M_Shifty View Post
    I'll Have to go buy one tomorrow its 10:30pm atm.

    Had High Hopes and went and grabbed the N64 remote but to big.

    Even Thou the wii is not responding to my TV Vice Versa.
    The Wii is not even loading or anything the tv just stays the same. kinda like oh i have power but No Monitor Cord Plugged in

    Ta,
    Well, I am quite new to this forum myself, and I don't know alot yet about unbricking. ALOT of people here, however, do know alot about unbricking. Maybe someone else can help you find another way to unbrick without waiting a day!

    And the problem you have, I have too. It's called a low-level brick. Another member here is repairing mine now though ^^.

  9. #9
    Junior Member
    Join Date
    Feb 2010
    Posts
    9
    Thanks
    1
    Thanked 1 Time in 1 Post
    Thanks Mate,

    Hopefully Tealc gets back with another Suggestion.

  10. #10
    New Member erikie's Avatar
    Join Date
    Oct 2009
    Location
    Netherlands
    Posts
    524
    Thanks
    8
    Thanked 170 Times in 141 Posts
    Blog Entries
    2
    Your only hopes are getting either preloader or bootmii started on your wii
    You have tried preloader already so you can rule that out. You also tried cboot2 files.
    Turn on your wii without SD card, how many blue flashes do you see? If only 1 then you have no bootmii in boot2 installed.
    Do you have a nand backup of your wii? Or is your wii pretty old? Then it is still fixable
    otherwise it is not....
    If you think I helped you please click the little thanks button
    Send me a PM if you have any questions regarding unbricking with infectus mod chip or post a message in here http://www.wiihacks.com/bricked-wii-...installed.html

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •