Results 1 to 5 of 5

Thread: Banner Brick need help please

  1. #1
    Junior Member
    Join Date
    Jan 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Banner Brick need help please

    Ok so i banner bricked my wii a good while ago. It goes to the heath and safety screen and when i press a it goes to a blank screen with no sound so this is a banner brick correct? I think it was a bad .wad install

    I have just purchased and install wiikey 2 so i can unbrick my wii.

    so wiikey 2 is newly installed
    I have the twilight hack installed
    system version is 3.3 usa
    i have a gamecube controller

    do not have starfall installed


    I tired following this guide http://www.wiihacks.com/recommended-...ner-brick.html but when i get to the system version number window and i enter the recovery disk v1.31 the cd will read but nothing comes up.

    please let me know what might i be doing wrong.

  2. #2
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,572 Times in 2,972 Posts
    Blog Entries
    15
    If you have tph, boot zelda and put TP-WM-loadmii-dol.zip on your formated sd-card. Put the bad wad in sd:\wads. Then run tph and uninstall it with wadmanager.

    Or try
    LCUDv3.part001.rar
    LCUDv3.part002.rar
    it uses ios36

    or try
    UUDv4.part001.rar
    UUDv4.part002.rar
    it uses ios249

    If you don't have the wad, try to use any title deleter mod, just add the dol to the loadmii sd card and boot it with tph.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  3. #3
    Junior Member
    Join Date
    Jan 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Not sure what thp is but i tired LCUDv3 and UUDv4 both did not do anything after gamecube controller trick.

    I read you could use bootme with zelda cd and do it that way. I'm not sure how to use boot me though.

  4. #4
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,572 Times in 2,972 Posts
    Blog Entries
    15
    Quote Originally Posted by skyzim View Post
    Not sure what thp is but i tired LCUDv3 and UUDv4 both did not do anything after gamecube controller trick.

    I read you could use bootme with zelda cd and do it that way. I'm not sure how to use boot me though.
    TPH- twilight princess hack

    Can you boot the zelda disk? If not try to use Wii Autoboot Creator.zip on a zelda ios and set it to autoboot. Then burn it and try again.

    Is your modchip configured to autoboot?
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  5. #5
    Junior Member
    Join Date
    Jan 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    YAY!!! I unbricked my wii. I used bootme to auto-boot the twilight hack that was already installed. Then used any title deleter to remove the bad wad file. Ah its nice to have my wii back. Now i can play around with my mod chip, wiikey 2

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •