Printable View
wii softmod etc to wii4.2e
was working till iiii got into change ios .dont remember which but now when i load up i get press a then black sreen.did try a lot of ideas but info please before kids get home from school frantic as kids nearlly comp cod new cheerrs
hi did you have bootmii installed as boot2 and preloader let me no
Black screen/Opera message after H&S screen leads me to the conclusion that you banner bricked by installing a bad wad file.
If you can access preloader or bootmii/boot2 then that would make things much easier for you.
which files do i need to bottmii as i have loads from diff attempts earlier last week.trying but keeps going to sios 20 installer
pretty sure it was boot 2.i think i did try a ios to add to try and run another backup du
You would have a bootmii folder with a few files inside on your SD card.
Easy way to check is watch for DVD slot flashes, if you get 2 really close together you are go for boot2. You can grab a copy of the bootmii files here --> bootmii folder.rar From an older install but should still work. Not all SD cards are supported but all DVD slots will flash if you have it installed.
one flash on dvd.i can get to wad manager if that helps.i will add files from this link for bootmii
One flash means you don't have boot installed so the files are not useful for you.
As you can reach Wad manager you now need to work out which wad has bricked your Wii. It must have been something you installed recently.
Do not uninstall IOS under 200, or you could really brick your Wii.
Uninstalling through wad manager is quite straightforward, you'll need the copy of the wad you originally installed to facilitate uninstallation.
Otherwise you can use anyttitledeleter, but that can be dangerous if you are unsure what you are doing.
sorry to mess about.
dvd when i turn on one flash then two close together with no dvd inside
Never tried it with the disc in.
That's boot2 you have there.
Anyway it's easier to not use boot2 as you can already launch wad manager by other means.
You need to work out which wad.