Page 73 of 87 FirstFirst ... 2363717273747583 ... LastLast
Results 721 to 730 of 861

Thread: Fully Brick, Bootmii/boot2 installed but No Nand Backup? Solution Here!

  1. #721
    New Member
    Join Date
    Nov 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Unhappy

    Hi! Well my problem is the following.

    I had the 3.4E on my Wii and tried to update to 4.0E following a tutorial that i saw on other web...When the process ended and i tried to exit from HBC and i got a black screen, then i restart my wii and cant start from the bootmii menu and cant access the hbc from there so i followed this tutorial and once that i turn on my wii with that files on my sd i can access to the Wii menu and everything looks ok the versión is the 4.0E...But when i tried to exit from any channel i got a black screen again...And dont know what to do, install some IOS? ...I really dont know what to do.

    Thanks.

  2. #722
    New Member
    Join Date
    Dec 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    wad manager loads i select iso none of the wads install i get error 2011 or 1035

    i tried all 4 usa versions in the wad folder at the same time does that matter tried both wad managers too can you help thank you o yeah my gfs wii is from 2006 thats all i know
    Last edited by rustytrolz; 12-03-2010 at 07:14 AM. Reason: not finished

  3. #723
    New Member
    Join Date
    Dec 2010
    Posts
    8
    Thanks
    1
    Thanked 0 Times in 0 Posts
    I bricked my wii while trying t odowngrade from 4.1 to 3.1 while following an instruction guide online to un-mod my wii. The down grade seem to have worked, as it left me on a screen that said " Done" press any key to restart. I restarted and the screen just came up black, the green light is on, but screen stays black, I teied both files to load anyone and still nothing but a black screen, any ideas?

  4. #724
    Member WhiteShad0wX's Avatar
    Join Date
    Jun 2010
    Location
    I'm right here
    Posts
    1,615
    Thanks
    274
    Thanked 319 Times in 290 Posts
    sounds like you have a newer wii...
    I would guess you don't have bootmii as boot2 (drive light flashes twice at startup if installed, once if not)
    priiloader? (hold reset at startup to check)

    if those don't work, do you have a GC controller? To check to see if the recovery menu will work.
    See the Thanks button over there?
    <================================= Click it

  5. #725
    New Member
    Join Date
    Dec 2010
    Posts
    8
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by us3rname View Post
    sounds like you have a newer wii...
    I would guess you don't have bootmii as boot2 (drive light flashes twice at startup if installed, once if not)
    priiloader? (hold reset at startup to check)

    if those don't work, do you have a GC controller? To check to see if the recovery menu will work.

    I had priiloader and bootmii installed, not as boot2 tho. I just now tried the GC controller, plugged it in and turned it on, still just a black screen, the drive flashes only once so I have to assume that the softmod I did yesterday is gone. As I stated b4, I wastrying to do a system clean to get it back to as close to normal as I could.

    My wii was made in 2006.

  6. #726
    Member WhiteShad0wX's Avatar
    Join Date
    Jun 2010
    Location
    I'm right here
    Posts
    1,615
    Thanks
    274
    Thanked 319 Times in 290 Posts
    if your wii is that old, you should've installed it as boot2...
    drive light flashing once means it's not installed.
    priiloader was probably wiped out in the downgrade. Did you install the system menu ios for 3.1?
    if not, savemiifrii won't help
    See the Thanks button over there?
    <================================= Click it

  7. #727
    New Member
    Join Date
    Dec 2010
    Posts
    8
    Thanks
    1
    Thanked 0 Times in 0 Posts
    I thought I had, Im guess I didnt ho, as nothing seems to be working, I followed this page to softmod it 3.1-4.1 Soft mod for the wii - Se7enSins Forums after it didnt work, I then used this link [removed] to try to get the software back off as the link says I need to downgrade then remove al the other stuff afterwards..

    When I did the softmod i wasent given an option to use boot2, here is my serial number lu399551411
    Last edited by Ithian; 12-12-2010 at 06:25 PM.

  8. #728
    Member WhiteShad0wX's Avatar
    Join Date
    Jun 2010
    Location
    I'm right here
    Posts
    1,615
    Thanks
    274
    Thanked 319 Times in 290 Posts
    by the boot2 serial number list, looks like you couldn't install bootmii as boot2. That means it's a newer wii which means it doesn't work on > 3.4 (or 3.3 or 3.2, don't remember which it is).

    also, wiihacks doesn't support guides from other sites
    See the Thanks button over there?
    <================================= Click it

  9. #729
    New Member
    Join Date
    Dec 2010
    Posts
    8
    Thanks
    1
    Thanked 0 Times in 0 Posts
    so any idea of what I can do? anything at all?

  10. #730
    Member WhiteShad0wX's Avatar
    Join Date
    Jun 2010
    Location
    I'm right here
    Posts
    1,615
    Thanks
    274
    Thanked 319 Times in 290 Posts
    The nand has to be reprogrammed. But for that, you would need to have already made a nand backup...
    See the Thanks button over there?
    <================================= Click it

  11. 1 User Says Thank You WhiteShad0wX For This Useful Post


Page 73 of 87 FirstFirst ... 2363717273747583 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •