Sure you can back up NAND but you can't restore it safely.
Don't update to either 3.4 or 4.2 as they both have issues, 4.0 or 4.1 would be better (use Waninkoko firmware updater 4.1)
Oh and press thanks.
Not really doing much Wii stuff these days.
What about the people who have System 4.2 on USA? And I got a full brick but i didnt Delete an IOS at all or ever. The last thing i did was try out on the Homebrew Browser the IOSCheck thing. Can you explain this to me please?
Why can't I download 4.0U-System menu-NTSC-U-v417.wad from the link in the first thread?
ok. I feel really dumb because the pre-loader comes up and I don't know what to do.
If you are talking about Preloader then Load Homebrew Channel from Preloader, then from there fix your problem, e.g if it was a bad wad for a channel,VC or Wiiware, load WAD Manager and un-install it. if it was your system menu that got corrupted, then install a new one via cIOS Downgrader or WAD Manager.
If you are talking about bootmii, the information is in the tutorial
I can't seem to load the Homebrew channel, that's my problem.
if like me your system is corrupt and you cant load cboot2 via bootmii, then you can use betwiin to swap a nand from a working wii to a non working wii.
it is a little bit hard but here is a guide that i found
you need to register its free. then you can see the pictures and download links.
i had never used cpromt or hexeditor before reading this guide.
swapped the nand but wii still dont work.
Last edited by jamieupanddown; 11-13-2009 at 03:11 AM.
Okay i have tried this guide and have got this far... could someone please suggest any further steps...
tried both wad manager 1.5 & 1.4 packs..
i have a PAL wii previous system menu was 3.4e tried doing the softmod but sadly put preloader on before i upgraded.. this is where it stands at the moment.. i can get the homebrew channel on but i get system files are corrupt on any other way..
with this guide i can get the IOS50-v4889 to load fine but the System Menu v386 (3.4e) give me an error 1033... i have tried to install the System Menu v290 (3.2e) but that gives me a 1035 error.. does anyone have any advice??
Thanks in advance..
can some one help me please.
i have tryed allsorts i had hbc working fine and usb loader but neo gammer just sent me to black screen now i turn my wii on and it starts up with black screen and a buzzing noise. i have tryed the reset button but sends me back to the same thing.
i am quite new to modding and am worried that this can not be fixed please help anyone i am gonna get screamed at by the missus.
hi Hi thanks a lot for this saved me a fortune and worry used wad manager v1.4 Wii now up and running again. Many thanks