Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Wii Bricked, black screen, FW 4.2E

  1. #1
    Junior Member
    Join Date
    Sep 2009
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Wii Bricked, black screen, FW 4.2E

    Hello there

    This is my first post, so do excuse any mistakes.

    I was stupid enough to ignore advice not to downgrade my Wii after upgrading to FW 4.2E (I am on a PAL Wii so no region mistake brick here), I downgraded using Waninkoko's CIOS downgrader 1.2 to Version 3.2E, my Wii downgraded fine, but when I tried to install Firmware 4.0 using Waninkoko's Firmware 4.0 updater, It finished really quickly, I restarted and now I get a black screen, I have a feeling this is a full brick, my Wiimote also will not connect.

    I want to know, is there any way I can fix this? Will Savemii even boot my Wii into recovery mode? i'm no noob to the modding scene, im a noob to fixing bricks, i've tried SaveMiiFrii with a 3rd party GC controller, no luck though, I was thinking of trying SaveMii with a legit Wii game disc that I could borrow off a friend would that work as long as the FW is over 3.2E? I do not want to waste my money on a SaveMii if it will not work, also I have no modchip installed so I don't think I can boot a recovery disc or autoboot/universal unbrick disc, I am mainly worried about Boot2V4 issues, has downgrading my Wii from 4.2 to 3.2E using Waninkoko's CIOS downgrader still kept that Boot2V4? if so, will this interfere when using SaveMii?

    Please, all help will be appreciated!

  2. #2
    Senior Member
    Retired Staff
    davepm's Avatar
    Join Date
    Aug 2009
    Location
    Lincoln, Lincolnshire, United Kingdom
    Posts
    4,561
    Thanks
    124
    Thanked 2,059 Times in 831 Posts
    Blog Entries
    1
    if savemiifrii doesn't work then savemii wont, they are both the same. Double check some youtube vids to make sure your doing it right, it can be tricky.

    If you updated to 4.2 with the official update, then your boot2 is already a boot2v4 now, that is what 4.2 does to your wii.

    I thin kyour pretty much screwed to be honest, although im sure Tealc will be along soon to answer you, he is the master of all things bricked!

  3. #3
    Junior Member
    Join Date
    Sep 2009
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by davepm View Post
    if savemiifrii doesn't work then savemii wont, they are both the same. Double check some youtube vids to make sure your doing it right, it can be tricky.

    If you updated to 4.2 with the official update, then your boot2 is already a boot2v4 now, that is what 4.2 does to your wii.

    I thin kyour pretty much screwed to be honest, although im sure Tealc will be along soon to answer you, he is the master of all things bricked!
    Oh I see, does it make a difference if I'm using a 3rd Party GC controller, I thought maybe because of that it doesn't work, I have looked on youtube and tried all the ways, but one thing I don't get is, why have they got their Wii consoles open when doing the SaveMiiFrii? is that a step I'm missing?

    Yeah I updated using official update damn you Nintendo, if my boot2 is boot2v4 will it interfere if, hypothetically speaking, I could use the SaveMii dongle to load a different FW version using a Legit Wii game with a FW higher than the 3.2E?

    Yes, I hope Tealc does come along, please Tealc help me out!

  4. #4
    Junior Member
    Join Date
    Sep 2009
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Does anyone know? I thought this forum was supposed to helpful, if you don't know, just say! Would be better than staying quiet!

  5. #5
    New Member
    Join Date
    Aug 2009
    Posts
    41
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by gkurl17 View Post
    Oh I see, does it make a difference if I'm using a 3rd Party GC controller, I thought maybe because of that it doesn't work, I have looked on youtube and tried all the ways, but one thing I don't get is, why have they got their Wii consoles open when doing the SaveMiiFrii? is that a step I'm missing?

    Yeah I updated using official update damn you Nintendo, if my boot2 is boot2v4 will it interfere if, hypothetically speaking, I could use the SaveMii dongle to load a different FW version using a Legit Wii game with a FW higher than the 3.2E?

    Yes, I hope Tealc does come along, please Tealc help me out!

    Having the Wii console open has nothing to do with the Savemiifrii video.

    You don't need the dongle. The GC controller method does the EXACT same thing (IF you can get it to work and IF it's even ABLE to work in your current state).

    If you can somehow get an original disc with an update higher than that, you have a chance.

  6. #6
    Senior Member messie's Avatar
    Join Date
    Jun 2009
    Posts
    5,118
    Thanks
    68
    Thanked 7,150 Times in 1,065 Posts
    well this sounds like a low level brick to me.. your ios60 is a stub and it is needed for 4.0.... but you dont have it...

  7. 1 User Says Thank You messie For This Useful Post


  8. #7
    Junior Member
    Join Date
    Sep 2009
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by elninost0rm View Post
    Having the Wii console open has nothing to do with the Savemiifrii video.

    You don't need the dongle. The GC controller method does the EXACT same thing (IF you can get it to work and IF it's even ABLE to work in your current state).

    If you can somehow get an original disc with an update higher than that, you have a chance.
    Yes I understand, but the thing is I haven't got a an OFFICIAL Nintendo GC controller, I've tried with a third party one, taking it apart, putting it back etc, my D-pad buttons had this sort of pad/cushion thing with for holes that could be pressed in with pressure to activate the corresponding button on the controller board, the actual buttons themselves had a "nipple" thing at the bottom that would prevent them from being pressed at the same time, I took it apart, cut the "nipple" off and tried it, even after repositioning that cushion
    It's better If i show you via pics of the D pad

    http://img19.imageshack.us/img19/4870/p1603092122.jpg

    I haven't got a pic of the cushion thing unfortunately
    also, how would I know if i'm able to get in the recovery mode state in the first place?
    Last edited by gkurl17; 10-15-2009 at 11:13 AM.

  9. #8
    Junior Member
    Join Date
    Sep 2009
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by messie View Post
    well this sounds like a low level brick to me.. your ios60 is a stub and it is needed for 4.0.... but you dont have it...
    Yeah its definitely a low level brick, erm if it helps, I got rid of the stubbed IOS249 before bricking it, if the IOS60 is stubbed, does that mean it would interfere when i'm in recovery mode trying to update it off a genuine game disc? (if I can get into it recovery mode that is)

  10. #9
    Junior Member
    Join Date
    Oct 2009
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    I have same 4.2E black screen problem, though I haven't downgraded my wii, since I softmoded it after 4.2E FW was already updated to my console. Only thing I can recommend is to try starting without SD-card in slot.

    In my case, pressing the power button two seconds or so to start my console (my console doesn't start by booting it via controller at all) and starting the controller at the boot. Sounds like a semi-brick for me too.

    I don't know how to fix this, and I haven't even put my efforts to check out ways to fix this since all the backups and such play better than well. Hopefully this is helpful.

    If there is a chance of fullbrick with this setting of mine, then I propably should check out deeper details on this problem, but for now I am one happy wii-gamer every once in a while.
    Last edited by hypermario; 11-03-2009 at 03:03 AM.

  11. #10
    Senior Member messie's Avatar
    Join Date
    Jun 2009
    Posts
    5,118
    Thanks
    68
    Thanked 7,150 Times in 1,065 Posts
    black screen on boot is full brick and unrecoverable. how did you do that?

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •