LinkBack URL
About LinkBacks
Reply With QuoteIf you have this chip installed. Insert the disc and perform the savemiifrii by holding all four d-pad directions on a gamecube controller that is plugged into the fourth port.
I also can get into recovery mode. I cant get into systemmenu so i just run the disk above mentioned?
Ps- i cant get into internet and its not configured.
Last edited by The_Eskimo; 10-29-2009 at 05:32 PM.
If you have this chip installed. Insert the disc and perform the savemiifrii by holding all four d-pad directions on a gamecube controller that is plugged into the fourth port.
what chip? i dont have any chips installed. if you mean autoboot chips i dont want to have to buy one.Originally Posted by ShadowSonic2 [Only Registered Members May View Links| Click here to register]
Last edited by The_Eskimo; 10-31-2009 at 07:14 AM.
The pre-programmed to autoboot Wasabi DX or Drivekey which is available from the link in this thread.
Autoboot enabled Wasabi DX I have a banner bricked wii and an autoboot enabled wasabi dx, i bought a savemii as i couldn't be bothered with the savemiifrii everytime (lazy i know). My wii can get to the recovery mode but when it try to boot off ANY disk (Original game, Backup game, Unbrick Disk) the firmware version disappears but it just sits at a black screen and doesn't go any further.
At first i thought that this was a problem with my wii and how i'd stuffed it up but when i try and do the same on my other working wii it just does the same.
i don't have BootMii or Preloader on either of them.
Any help or pearls of wisdom would be GREATLY appreciated as i feel i'm getting closer to a resolution but it seems tantalizingly out of reach
Jamie
i am very happy about this, i briced my wii yesterday, and the helpers of the world brought me here, and now i could sav my iihopefully. lol wish me luck
Pal wii bricked with ntsc update Hi,im new on here and was looking for a bit of info,my son updated his softmodded pal wii with an ntsc update and now it is what you say bricked.can this be unbricked at all it didnt have any preloader or bootmii installed just back up launcher and homebrew channel.any help much appreciated.
Rob.
dodjer - Depends on which game was used. If it's anything but NSMB then you can use NSMB PAL to update your Wii to 4.1 and put it right.
Or if you can access homebrew channel
Install System IOS and System Menu for your version using Wad manager.
I'd do the second one as you are in control, not Nintendo.
Uk 4.0E Wii. Wiikey2. Softmod. 320GB WD My Passport Essential WBFS/FAT32 USB Drive.
Intel i7 920 Quad core oc 4Ghz, 6GB Tri-RAM, Radeon 4890.
Click me for..
If I have helped you do remember to press the little thanks button! <----
And please do donate to the forum if you are able so we can go on helping the Wii community.
i think it was punchout,but when i try to turn the wii on i get nothing.
thanx for quick reply.
Posting Permissions 
