View RSS Feed

mauifrog

Error 003 fix

Rate this Entry
by , 03-02-2011 at 06:13 PM (10974 Views)
THANK YOU GIANTPUNE
THANK YOU GIANTPUNE
THANK YOU GIANTPUNE

THANK YOU GIANTPUNE

THANK YOU GIANTPUNE

Smash stack pal/kor has been release-
SmashStack PAL/KOR

What does this mean for your 003 wii? It can be fixed.
What you will need, 1:1 iso of SSBB-PAL
What you will do, load SSBB-PAL on your 4.2/4.3u/e/j 003 bricked wii
How will you load SSBB-PAL on your U/J wii? You will use Giantpunes mariokart pawns method.
A gamecube controller
A dvd drive capable of reading burned disc, or a wode (new wii dvd drives will not work, you may need to replace it.)
A modchip or a wode

As posted before-
How to play region free games on your 003 error wii.
As you know, you can only play in region games on your 003 error wii. It is possible to load games from other regions. If you would like give it a try. I would be interesting if you could load SSBB- pal on a 4.2/4.3u 003 wii

Here is what you do-
Method #1 Boot ssbb vc starfox, disc swap to out of region game.
Requires 1:1 SSBB iso for your wiis region
Requires 1:1 SSBB-PAL iso
Requires classic controler
Requires Modchip
You need WIT- I used WIT v1.25b, 2011-01-10
You need Wii ISO title renamer

Extract the wit bin files to a dir, say c:\wit
Extract wii ios renamer to c:\wit
Copy ssbb.iso to c:\wit
Copy exploit.iso to c:\wit
I am using Windblows, so
Click start, run- type cmd and hit enter
The command shell will open

Type cd \
cd \wit
wit mix ssbb.iso select HBLE as 0.data header region --id=0 --dest starfox.iso
Let it do its thing

open up WIIISORenamerv3.exe
Open SSBB-PAL.iso
Change the game name and game id to match starfox.iso
Game name = Super Smash Bros. Brawl
GameID = 0SBE01 -FOR 4.3u
The game ID and game name must match for starfox.iso and SSBB-PAL.iso
Make sure both iso have the above game name and title
---Posibbly set the region code of SSBB-PAL.iso to USA with regionfrii (still waiting to test)
Burn both disc good and proper
You'll Need a dl disc to burn SSBB-PAL
Verbatim dvd +r 8x have worked well for me
Verbatim dvd -r 2.4x have worked well for me
Verbatim dvd -r 4x - my burner was to old to burn these, be aware that some newer dl disc may not work with older burners.
Burn with IMGBURN
Set the layer break to - 2084960

Use savemiifrii
Load the starfox disc from recovery menu, you'll need your classic controller plugged in (you can try without the classic controller and pressing reset)
Let the game load the the title screen where it says "press start"
Press home and the wiimote
Press eject on the wii, remove starfox disc and replace with exploit disc
With the wiimote, press restart. The game should restart into your exploit disc
(you could try without clasic controller, swat disc at the controller prompt, then press the reset button)
This should load the SSBB-PAL VC demo menu
Press [HOME] on the wiimote, select restart
This should load the main menu of SSBB-PAL
Now use Smash Stack PAL to load Multi Mod Manager
Follow my softmod guide from there to fix your wii, or just install cios70-v6174/cios80-v6174. You really should just follow my guide, it will install everything you need and prevent the issue in the future.


Method 2 disc channel install
Could be done with Mario Kart, probably wiifit or rabbids go home
You need a game iso for your region, that installs channels, and you must not have the channel installed on your wii
You need a game iso that has an exploit you wish to run, like Lego indian jones, star wars, batman, Yu-Gi-OH
You need WIT- I used WIT v1.25b, 2011-01-10


Extract the wit bin files to a dir, say c:\wit
Copy game.iso to c:\wit
Copy SSBB-PAL.iso to c:\wit

Make a txt doc, named game.txt
game.txt should have 1 line only-
+/files
Make a txt doc, named ssbb-pal.txt
exploit.txt should have 1 line only-
+/files

I am using Windblows, so
Click start, run- type cmd and hit enter
The command shell will open

Type cd \
cd \wit
wit mix game.iso header region SSBB-PAL.iso ignore "@ssbb-pal.txt" select DATA as chan --id=0 --dest disc1.iso --overlay
Let it do its thing
wit mix game.iso header region ignore "@game.txt" ssbb-pal.iso select DATA as chan --id=0 --dest disc2.iso --overlay
Let it do its thing

Burn disc1.iso and disc2.iso good and proper
disc2 needs to be burned on dl dvd, as described above
Load disc1.iso from the recovery menu

Navigate to the channel installer, select to install the channel. It will say channel requires so much blocks, install yes/no
When you get to that prompt, press home on the wiimote eject the disc1 disc and insert the disc2 disc
Press Home again and press the install prompt, Your ssbb-pal disc should load
I only tested on MK, if you have the channel installed it won't work.

OK best of luck, lets get them fixed.

I will try to put to gether a proper guide, but I thought you would like the info now.

Submit "Error 003 fix" to Digg Submit "Error 003 fix" to del.icio.us Submit "Error 003 fix" to StumbleUpon Submit "Error 003 fix" to Google

Categories
Uncategorized

Comments

  1. streamlinehd's Avatar
    • |
    • permalink
    Very nice
  2. Bliepo's Avatar
    • |
    • permalink
    Finally a error #003 fix. Thanks to Giantpune and mauifrog. At least, we can finally help people who bricked their wii this way/
  3. okilim's Avatar
    • |
    • permalink
    how do i use the wit in windows?
    "wit mix ssbb.iso select HBLE as 0.data header region --id=0 --dest starfox.iso"
    Where can i get the starfox.iso?
    Updated 03-24-2011 at 02:13 AM by okilim
  4. wiinegas's Avatar
    • |
    • permalink
    Greetings Mauifrog,

    i was trying to recover a korean wii from 003 error, but trying to install smash stack it says that cant continue installation because there are no vulnerable cios, what can i do to make a cios vulnerable been block with the 003 error?
    Thank you,
  5. Shadow666's Avatar
    • |
    • permalink
    Greetings Mauifrog,

    Where did your softmod guide go?